1. DE-528CT_XP.zip Driver
2. Mswfw311.txt File Contents

Mswfw311.txt Driver File Contents (DE-528CT_XP.zip)

   Windows for Workgroups v3.11

   Introduction:
   -------------
   This document describes the procedure to install Microsoft Windows
   for Workgroups v3.11 driver for D-Link DE-528CT PCI Adapter.

   LOCATION OF DRIVER:     \WFW311\DE528.DOS


   Setup Procedure:
   ----------------
      After you run into Windows for Workgroups 3.11:

      1. Select the "Network Setup" icon in the Network Group.

      2. Click on the "Drivers..." button.

      3. If you are replacing a previous LAN adapter, select the Remove
         button to delete that adapter.

      4. Click on the "Add Adapter" button.

      5. Choose Unlisted or Updated Network Adapter.

      6. Insert the driver disk into drive "A" and specify the path
         A:\WFW311 for the location of the driver.

      7. Close, and when prompted, restart your computer so that changes
         take affect.


   NOTES:
   ------
      1. Parameters for the PROTOCOL.INI file:

         AdapterID : This keyword is provided by DE528, and is required
                     when more than one DE528 adapters exist on one
                     system.

      2. Installing Multiple LAN Adapters:
         There are two different methods to complete it:

         (a) Under DOS mode, you can modify the AdapterID in file
             C:\WFW311\PROTOCOL.INI by yourself.

             For example:

                [DE528]
                DriverName=DE528$
                AdapterID=@0080AD123456

         (b) Or you can enter Windows for Workgroups and follow above
             setup procedure step 2, then click on "Setup.." button,
             fill AdapterID in Value item. Last step to select OK and
             close NETWORK SETUP.