OEMSETUP.INF Driver File Contents (9GXE415.EXE)

;#9GXE  <--- Number Nine Computer Corporation Tag
;=============================================================================
; OEMSETUP.INF         GXE Board Setup        Number Nine Computer Corporation
;
;   Installation data for the GXE Windows driver.  This file is used by the
;   Microsoft Windows SETUP program.
;=============================================================================


;-----------------------------------------------------------------------------
[disks]
;
; These are the names of the disks Setup can prompt for.
; There must be a disk name for each disk number used.
;
; The disk number '0' is reserved to represent the Windows setup directory.
; This directory may be relative to the directory SETUP was run from.
;
; The format is:
;
; 	n = path, disk name, disk tag file
;
; where:
;
;	n           = disk "number"  1-9, A-Z (single char only!)
;	path        = path of disk n
;	name        = name of disk n
;	disk tag    = a file on disk n (used to determine if disk is in drive)
;

 N = ., "#9 GXE Windows Driver Disk", GXEOem


;-----------------------------------------------------------------------------
[display]
;
; Both of the GXE windows driver require use of Windows 3.1.  There are no plans
; to support Windows 3.0 in the future.
;
;profile = driver, description, resolution, 286 grabber, logo code, VDD,
;	   386grabber, ega.sys, logo data, optional section
;

GXE4 = N:#9GXE.drv,   "#9GXE (Large Fonts)",           "100,120,120",           N:s3vga.2gr, N:vgalogo.lgo, N:vdds3.386, N:s3vga.3gr,,                     N:vgalogo.rle,  GXE4
GXE5 = N:#9GXETc.drv, "#9GXE True Color (Large Fonts)", "100,120,120",          N:s3vga.2gr, N:vgalogo.lgo, N:vdds3.386, N:s3vga.3gr,,                     N:vgalogo.rle,  GXE5
GXE6 = N:#9GXE.drv,   "#9GXE (Small Fonts)",           "100,96,96",           N:s3vga.2gr, N:vgalogo.lgo, N:vdds3.386, N:s3vga.3gr,,                     N:vgalogo.rle,  GXE6
GXE7 = N:#9GXETc.drv, "#9GXE True Color (Small Fonts)", "100,96,96",          N:s3vga.2gr, N:vgalogo.lgo, N:vdds3.386, N:s3vga.3gr,,                     N:vgalogo.rle,  GXE7



;-----------------------------------------------------------------------------
; Optional sections in field 9 of display section are interpreted as follows:
;
; 	File, Destination, .ini file, Section, OldLine, NewLine
;
; Where:    x:File      = Optional; file to be copied, may be left null.
;           Destination = 0: for Windows root or 0:system for system subdir
;                          where file is to be copied.
;           .ini file   = Optional; .ini file to be modified or created.
;                          Must be included if following parameters specified.
;           Section     = Section of .ini file to be modified.
;           OldLine     = Optional; old line to be removed from the .ini file.
;                          Only one occurence of that string is removed.
;           NewLine     = New text line to be written to the .ini file.
;
; The following lines set up both drivers for large fonts.

[GXE4]
 ,, system.ini, "#9GXE", "USEFILE=", "USEFILE=1"
 ,, system.ini, "#9GXE", "TurboCopy=", "TurboCopy=1"

[GXE5]
 ,, system.ini, "#9GXE", "USEFILE=", "USEFILE=1"
 ,, system.ini, "#9GXE", "TurboCopy=", "TurboCopy=1"

[GXE6]
 ,, system.ini, "#9GXE", "USEFILE=", "USEFILE=1"
 ,, system.ini, "#9GXE", "TurboCopy=", "TurboCopy=1"

[GXE7]
 ,, system.ini, "#9GXE", "USEFILE=", "USEFILE=1"
 ,, system.ini, "#9GXE", "TurboCopy=", "TurboCopy=1"

;-----------------------------------------------------------------------------
; Copy these files depending on the 386 grabber being used.

; This has the effect of loading both GXE drivers, if either is requested.
;
[s3vga.3gr]
 N:#9GXE.drv
 N:#9GXETc.drv
 
;-----------------------------------------------------------------------------
[sysfonts]

 N:96sys.fon,  "640x480 resolution System font",     "100,96,96"
 N:120sys.fon, "1024x768 resolution System font", "100,120,120"


;-----------------------------------------------------------------------------
[fixedfonts]

 N:96fix.fon, "640x480 resolution fixed System font",     "100,96,96"
 N:120fix.fon,"1024x768 resolution fixed System font", "100,120,120"


;-----------------------------------------------------------------------------
[oemfonts]

N:96oem.fon,  "640x480 resolution Terminal font",   "100,96,96",   1
N:120oem.fon, "1024x768 resolution Terminal font", "100,120,120", 1



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.76