oemsetup.inf Driver File Contents (R136024.EXE)

;
; OEMSETUP.INF
;
; This is the INF file for Windows Server 2000 and Windows
; 2003 (32-bit) for the PERC RAID family of Controllers
;
;********************************************************************
;                                                                    *
;   Copyright 2005 LSI Logic, Inc. All rights reserved.              *
;                                                                    *
;   This file is property of LSI Logic, Inc. and is licensed for     *
;   use as is.  The receipt of or possession of this file does not   *
;   convey any rights to modify its contents, in whole, or in part,  *
;   without the specific written consent of LSI Logic, Inc.          *
;                                                                    *
;********************************************************************

[version]
Signature="$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%DELL%
CatalogFile=percsas.cat
CatalogFile.ntx86=percsas.cat
DriverVer=08/24/2006,1.21.0.32

     
[DestinationDirs]
DefaultDestDir = 12 ; DIRID_DRIVERS

[SourceDisksNames]
1 = %disk1%,megasas.sys,,

[SourceDisksFiles]
megasas.sys = 1

[SourceDisksNames.x86]
2 = %disk2%,percsas.sys,,

[SourceDisksFiles.x86]
percsas.sys = 2


[ControlFlags]
;
; Exclude the following PnP devices from Select Device list.
;

ExcludeFromSelect = PCI\VEN_1028&DEV_0015&SUBSYS_1F011028
ExcludeFromSelect = PCI\VEN_1028&DEV_0015&SUBSYS_1F021028
ExcludeFromSelect = PCI\VEN_1028&DEV_0015&SUBSYS_1F031028
     
[Manufacturer]
%DELL%=DELL, NT.5.1, NT.5.2

[DELL]
;----------- WINDOWS 2000 INSTALL SECTION ----------------------------------------------------------


;PERC 5 controller family

;PERC5/E Controller Family
%perc5E.DeviceDesc% = megasas_Inst, PCI\VEN_1028&DEV_0015&SUBSYS_1F011028
;PERC5/i Controller Family
%perc5i.DeviceDesc% = megasas_Inst, PCI\VEN_1028&DEV_0015&SUBSYS_1F021028
;PERC5/i Integrated Controller Family
%perc5in.DeviceDesc% = megasas_Inst, PCI\VEN_1028&DEV_0015&SUBSYS_1F031028
     
[megasas_Inst]
CopyFiles = @megasas.sys

[megasas_Inst.HW]
DelReg = LegacyScsiportValues
AddReg = megasas_AddReg.HW

[megasas_AddReg.HW]
HKR, "ScsiPort", "NeedsSystemShutdownNotification", 0x00010001, 1
     
[megasas_Inst.Services]
AddService = megasas, %SPSVCINST_ASSOCSERVICE%, megasas_Service_Inst,Miniport_EventLog_Inst


[megasas_Service_Inst]
ServiceType    = %SERVICE_KERNEL_DRIVER% 
StartType      = %SERVICE_BOOT_START% 
ErrorControl   = %SERVICE_ERROR_NORMAL% 
ServiceBinary  = %12%\megasas.sys
LoadOrderGroup = SCSI Miniport
AddReg         = pnpsafe_W2Kpci_addreg
AddReg         = WIN2K_CriticalDataBase

[pnpsafe_W2Kpci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001
HKR, "Parameters\Device", "NumberOfRequests", 0x00010001, 0xFA
HKLM,"System\CurrentControlSet\Services\Disk","TimeOutValue",0x00010001,0x0000003C

[DELL.NT.5.1]
;----------- WINDOWS XP 32BIT INSTALL SECTION ----------------------------------------------------------


;PERC 5 controller family

;PERC5/E Controller Family
%perc5E.DeviceDesc% = NODRV, PCI\VEN_1028&DEV_0015&SUBSYS_1F011028
;PERC5/i Controller Family
%perc5i.DeviceDesc% = NODRV, PCI\VEN_1028&DEV_0015&SUBSYS_1F021028
;PERC5/i Integrated Controller Family
%perc5in.DeviceDesc% = NODRV, PCI\VEN_1028&DEV_0015&SUBSYS_1F031028

[NODRV] ;empty section

[DELL.NT.5.2]
;----------- WINDOWS 20003 32BIT INSTALL SECTION ----------------------------------------------------------


;PERC 5 controller family

;PERC5/E Controller Family
%perc5E.DeviceDesc% = percsas_Inst, PCI\VEN_1028&DEV_0015&SUBSYS_1F011028
;PERC5/i Controller Family
%perc5i.DeviceDesc% = percsas_Inst, PCI\VEN_1028&DEV_0015&SUBSYS_1F021028
;PERC5/i Integrated Controller Family
%perc5in.DeviceDesc% = percsas_Inst, PCI\VEN_1028&DEV_0015&SUBSYS_1F031028


[percsas_Inst.ntx86]
CopyFiles = @percsas.sys

[percsas_Inst.ntx86.HW]
DelReg = LegacyScsiportValues
AddReg = percsas_AddReg.ntx86.HW

[percsas_AddReg.ntx86.HW]
HKR, "ScsiPort", "NeedsSystemShutdownNotification", 0x00010001, 1
     
[percsas_Inst.ntx86.Services]
AddService = percsas, %SPSVCINST_ASSOCSERVICE%, percsas_Service_Inst,Miniport_EventLog_Inst


[percsas_Service_Inst]
ServiceType    = %SERVICE_KERNEL_DRIVER% 
StartType      = %SERVICE_BOOT_START% 
ErrorControl   = %SERVICE_ERROR_NORMAL% 
ServiceBinary  = %12%\percsas.sys
LoadOrderGroup = SCSI Miniport
AddReg         = pnpsafe_pci_addreg
AddReg         = WIN2K3_CriticalDataBase


;************************************************************* 
;The EventLog entries are the same for all SCSI miniports. 
[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg
     
[pnpsafe_pci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001
HKR, "Parameters\Device", "NumberOfRequests", 0x00010001, 0x000003e8
HKLM,"System\CurrentControlSet\Services\Disk","TimeOutValue",0x00010001,0x0000003C

[WIN2K_CriticalDataBase]
HKLM,SYSTEM\CurrentControlSet\Control\CriticalDeviceDataBase\pci#ven_1028&dev_0015&subsys_1F011028,ClassGUID,,%ClassGUID%
HKLM,SYSTEM\CurrentControlSet\Control\CriticalDeviceDataBase\pci#ven_1028&dev_0015&subsys_1F011028,Service,,%Service1%
HKLM,SYSTEM\CurrentControlSet\Control\CriticalDeviceDataBase\pci#ven_1028&dev_0015&subsys_1F021028,ClassGUID,,%ClassGUID%
HKLM,SYSTEM\CurrentControlSet\Control\CriticalDeviceDataBase\pci#ven_1028&dev_0015&subsys_1F021028,Service,,%Service1%
HKLM,SYSTEM\CurrentControlSet\Control\CriticalDeviceDataBase\pci#ven_1028&dev_0015&subsys_1F031028,ClassGUID,,%ClassGUID%
HKLM,SYSTEM\CurrentControlSet\Control\CriticalDeviceDataBase\pci#ven_1028&dev_0015&subsys_1F031028,Service,,%Service1%

[WIN2K3_CriticalDataBase]
HKLM,SYSTEM\CurrentControlSet\Control\CriticalDeviceDataBase\pci#ven_1028&dev_0015&subsys_1F011028,ClassGUID,,%ClassGUID%
HKLM,SYSTEM\CurrentControlSet\Control\CriticalDeviceDataBase\pci#ven_1028&dev_0015&subsys_1F011028,Service,,%Service%
HKLM,SYSTEM\CurrentControlSet\Control\CriticalDeviceDataBase\pci#ven_1028&dev_0015&subsys_1F021028,ClassGUID,,%ClassGUID%
HKLM,SYSTEM\CurrentControlSet\Control\CriticalDeviceDataBase\pci#ven_1028&dev_0015&subsys_1F021028,Service,,%Service%
HKLM,SYSTEM\CurrentControlSet\Control\CriticalDeviceDataBase\pci#ven_1028&dev_0015&subsys_1F031028,ClassGUID,,%ClassGUID%
HKLM,SYSTEM\CurrentControlSet\Control\CriticalDeviceDataBase\pci#ven_1028&dev_0015&subsys_1F031028,Service,,%Service%


     
[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,%%SystemRoot%%\System32\IoLogMsg.dll 
HKR,,TypesSupported,%REG_DWORD%,7

[LegacyScsiportValues]
HKR,Scsiport

[Strings]
;------------------MegaRAID----------------------------
DELL="DELL"
disk1 ="DELL PERC RAID Driver for Windows 2000"
disk2 ="DELL PERC RAID Driver (Server 2003 32-bit)"
perc5E.DeviceDesc = "DELL PERC 5/E Adapter RAID Controller"
perc5i.DeviceDesc = "DELL PERC 5/i Adapter RAID Controller"
perc5in.DeviceDesc = "DELL PERC 5/i Integrated RAID Controller"

Service1 = "megasas"
Service = "percsas"
ClassGUID = "{4D36E97B-E325-11CE-BFC1-08002BE10318}"     
     
;******************************************* 
;Handy macro substitutions (non-localizable) 
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER  = 1
SERVICE_BOOT_START     = 0
SERVICE_ERROR_NORMAL   = 1
REG_EXPAND_SZ          = 0x00020000
REG_DWORD              = 0x00010001
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.77