Readme.txt Driver File Contents (IwillPro66.zip)

                HPT366 Device Driver for Microsoft Windows 95/98

               Copyright (c) 1995-2000 HighPoint Technologies, Inc.
                        All Rights Reserved
                              Version 1.25
                               

R E V I S I O N :
****************************************************************************
    v 1.25  03/31/2000
            o  Fix HPT366 Windows 98 shutdown issue on certain hard disks
            o  Fix Windows 98 SE "stand by" problem on certain hard disks
            o  Add signature file into INF

    v 1.24  03/06/2000 
            o  Fix large files copy issues
            o  Add IC controller revision check
            o  Modify INF to a generic Win98 INF file for HPT3xx series
            o  adapter.  

    v 1.23  02/15/2000
            o  Fix compatibility problem with SamSung ATA66 hard disk

    v 1.22  12/23/99
            o  Fix system hung-up during large files copy by adding error
               recovering process
            o  Fix compatibility on Seagate Barracuda hard disks 

    v 1.21  o  Fix compatability problem on Maxtor 20GB hard disk
            o  Fix VxD problem which causes VCOMM error when no device
               is connected on UDMA66 channels

    v 1.20  o  Rename it as rev 1.20 to match BIOS's changes
            o  fix incompatible with CD-RW drives

    v 1.10  o  fix yellow mark in UDMA66 secondary channel booting
            o  fix recognition of CD changer
            o  fix playing VCD from DVD-ROM 
            o  fix share IRQ issue

    v 1.09  o  fix compatibility with WDxxxAA hard disk

    v 1.08  o  fix timing setting in PIO-0/PIO-1/DMA-1
            o  fix problem with OnStream digital back up system
            o  fix recognition problem on Intel 810 chipset

    v 1.04  o  support multiple adapters
   

O V E R V I E W :
****************************************************************************
There are 4 files related to the HPT366 Device Driver for Microsoft
Windows 95/98:

    1.  HPT366.MPD    The driver file.
    2.  HPT366.INF    The installation file.
    3.  README.TXT    This file.
    4.  HPTPWR.VXD    The driver for ACPI function


I N S T A L L I N G  T H E  D R I V E R:
****************************************************************************
This installation procedure is specific only to the current version of the 
driver and installation file. 

NOTE:  
    The driver (HPT366.MPD) and installation file (HPT366.INF) must be
    located on the same directory of the install floppy diskette.

Usually, when you plug the HPT366 Ultra DMA host adapter into your system and
boot up the Windows 95/98 system, the system will be able to detect the HPT366
Ultra DMA host Adapter automatically and ask you to install the driver for HPT366.
You can just follow the instructions promted by the system to install the 
driver.

Otherwise, you can install the driver by the following steps:

1.  Windows 95/98 must be installed on the system prior to installing the
    driver.

2.  Close any running applications.
 
3.  Open "My Computer".

4.  Double click on the "Control Panel" icon.

5.  Double click on the "Add New Hardware" applet.

6.  Click on the "Next" button.

7.  There is a window that ask you "Do you want Windows to search for your
    new hardware?", choose "No" then click on the "Next" button.

8.  There is a Window listing hardware types, select the "SCSI controllers"
    then click on the "Next" button.

9.  Put the install diskette into the drive A: and then click on the
    "Have Disk..." button.

10. Click on the "OK" button.

11. Click on the "Next" button.

12. If there is a window showing the settings (resources) to be used by the
    driver, then click on the "Next" again. At this point, the system will
    install the driver.

13. Click on the "Finish" button.

14. Then the system will ask you to restart the system. If the settings
    reported in step 12 are not what set on the host adapter, you must
    adjust the settings by using the device manager in the System control
    panel before restarting your computer.

15. The driver for ACPI function is useful only if hardware supports
    ACPI function.


U N - I N S T A L L I N G  T H E  D R I V E R :
****************************************************************************
You can use the device manager in the System control panel to remove the
driver.



****************************************************************************
CONTACTING HIGHPOINT
****************************************************************************

    HighPoint Technologies, Inc.
    5177 Brandin CT
    Fremont, CA 94538

    Tel: (510) 623-0841 (Technical Support Line) 
    Fax: (510) 490-4578

    E-mail: support@highpoint-tech.com
    World Wide Web:  http://www.highpoint-tech.com


****************************************************************************
****************************************************************************

COPYRIGHT
   Copyright (c) 1995-2000  HighPoint Technologies, Inc. All rights
   reserved. No part of this README file may be reproduced, stored
   in a retrieval system, or transmitted in any form or by any means,
   electronic, mechanical, photocopying, recording or otherwise,
   without the prior written consent of HighPoint Technologies, Inc.

TRADEMARKS
   All trademarks are owned by their respective owners.

CHANGES
   The material contained within this document is for informational use 
   and is subject to change without notice. While reasonable efforts have
   been made in the preparation of this document to assure its accuracy,
   HighPoint Technologies, Inc. assumes no liability resulting from errors
   or omissions in this document, or from the use of the information
   contained herein.

   HighPoint Technologies, Inc. reserves the right to make changes in
   the product design without reservation and without notification to
   its users.

LIMITATION OF LIABILITY:
   IN NO EVENT WILL HIGHPOINT BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
   INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR
   INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
   THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, HIGHPOINT SHALL NOT
   HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED/USED WITH
   THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, OR 
   RECOVERING SUCH HARDWARE, OR DATA.























































Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.42