DELL COMPUTER CORPORATION COPYRIGHT (C) 1988-1995, ALL RIGHTS RESERVED SOFTWARE SUPPORT INFORMATION UPDATE Description: SCSI software support for systems with built-in NCR 53C810 Systems Supported: Omniplex 4xxx, PowerEdge SP 4xxx Omniplex 5xxx, PowerEdge SP 5xxx Optiplex DGX 5xxx-2 PowerEdge SP/XE 5xxx-2 DASH card Version: A07 Release Date: 9/07/95 Before using the software in this release, read this file in its entirety. It contains the most up-to-date information about this software support package. The information in this file may supersede information in your system documentation. TABLE OF CONTENTS ----------------- 1.0 Windows 95 2.0 Windows NT 3.51 3.0 DOS - DOSCAM.SYS /SCAN 1.0 Windows 95 ------------------ You should use the NCR SCSI drivers supplied with Microsoft Windows 95 instead of those supplied with this driver package. Windows 95 will automatically detect the NCR SCSI controller and install the appropriate drivers. 2.0 Windows NT 3.51 ----------------------- You should use the NCR SCSI drivers supplied with Microsoft Windows NT 3.51 instead of those supplied with this driver package. Windows NT 3.51 will automatically detect the NCR SCSI controller and install the appropriate drivers. 3.0 DOS - DOSCAM.SYS /SCAN ------------------------------ If CD ROM drive is the only device attached to the built-in SCSI controller, the /SCAN switch must be specified when DOSCAM.SYS is loaded in CONFIG.SYS. This option should also be used in any situation where SCSI devices are attached to the SCSI bus, but DOSCAM.SYS fails to load. Here is an example of using this option: DEVICE=C:\SCSI\DOSCAM.SYS /SCAN ---- End of File ----Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.