[Reserved] LogonTime=3 LogonFile=PCTellogon.bmp URLName=V92 website URL=http://v92.com/v92_faq.htm URLx=185 URLy=187 Red=255 Green=255 Blue=255 [DLL] NameModem=PCTEL card Disconnect=0 PCTEL=1 Skin=moh.bmp FirstIndex=0 Name=MDMMOH.dll ShowDetails=0 ForceCallback=1 Function0=EnumerateModem Function1=ModemMOHOpen Function2=ModemMOHClose Function3=ModemMOHMonitor Function4=ModemMOHControl Function5=ConfigureCallback [Resume] Wait=0 Time=20000 ;When reconnecting, it was used to wait a certain amount of time to make sure the reconnection was ok, ;This should be handled by the modem, not by us. I think that in the last drivers you had ;this has been corrected, so now it is useless... [CallerId] Code=8 SubCode=608 Name="Name = " Number="Number = " [FlashDone] Code=8 SubCode=640 AskForHandset=0 [Control] CTRL_MOH_LOCAL_DECISION_MOH_LOCAL_IGNORE=2,3,256,4 CTRL_MOH_LOCAL_DECISION_MOH_LOCAL_DISCONNECT=2,2,256,-2 CTRL_MOH_LOCAL_DECISION_MOH_LOCAL_ACCEPT=2,1,256,2 CTRL_MOH_LOCAL_DECISION_MOH_LOCAL_RECONNECT=2,4,256,1 CTRL_MOH_ENABLE=0,-1,1024,-1 CTRL_OUTGOING_CALL_REQ=7,-1,512,-1 [Monitor] DRIVER_VERSION=0,-1,1,-1 MODEM_FRIENDLY_NAME=2,-1,2,-1 ;MODEM_COM_PORT=3,-1,4,-1 MOH_STATUS=105,-1,16,-1 CALLER_ID_STRING=104,-1,-2,-1 TIMEOUT_FOR_USER_RESPONSE=108,-1,-2,-1 SERVER_HOLD_DURATION=102,-1,-2,-1 MODEM_STATE=41,-1,8,-1 MOH_REMOTE_RESPONSE=103,-1,32,-1 [Callback] MODEM_STATE_IDLE=41,1,8,0 MOH_STATUS_IDLE=105,13,8,0 MODEM_STATE_PROT_LAYER_CONNECT=41,11,8,512 MOH_STATUS_NONE=105,0,8,512 MOH_STATUS_WAIT_FOR_CALL_RESUME=105,4,8,640 ; incoming call with callerid (V92) MODEM_STATE_CALL_WAITING_TONE_DETECTED=41,19,8,608 MOH_REMOTE_RESPONSE_ACK=103,500,8,608 MOH_STATUS_AS_DETECTED=105,1,8,608 MOH_STATUS_WAIT_FOR_USER_DECISION=105,3,8,608 ; incoming call with callerid (V90) MODEM_STATE_CALL_WAITING_TONE_DETECTED3=41,19,8,544 MOH_REMOTE_RESPONSE_NACK=103,501,8,544 MOH_STATUS_AS_DETECTED3=105,1,8,544 MOH_STATUS_WAIT_FOR_USER_DECISION3=105,3,8,544 ; incoming call without callerid (V92) MODEM_STATE_CALL_WAITING_TONE_DETECTED2=41,19,8,592 MOH_REMOTE_RESPONSE_ACK2=103,500,8,592 MOH_STATUS_AS_DETECTED2=105,1,8,592 MOH_STATUS_WAIT_FOR_USER_DECISION2=105,3,8,592 ; this is used for countries that don't have callerid ( like france in most of the case) ; incoming call without callerid (V90) MODEM_STATE_CALL_WAITING_TONE_DETECTED4=41,19,8,528 MOH_REMOTE_RESPONSE_NACK2=103,501,8,528 MOH_STATUS_AS_DETECTED4=105,1,8,528 MOH_STATUS_WAIT_FOR_USER_DECISION4=105,3,8,528 ; this is used for countries that don't have callerid ( like france in most of the case) ;MODEM_STATE_INITIALIZING=41,0,8,-2 ;MODEM_STATE_OFF_HOOK_IDLE=41,2,8,-2 ;MODEM_STATE_DIALTONE_VALIDATE=41,3,8,-2 ;MODEM_STATE_DIALING=41,4,8,-2 ;MODEM_STATE_RING_ON=41,5,8,-2 ;MODEM_STATE_CALL_PROGRESS=41,6,8,-2 ;MODEM_STATE_V8=41,7,8,-2 ;MODEM_STATE_V8BIS=41,8,8,-2 ;MODEM_STATE_TRAINING=41,9,8,-2 ;MODEM_STATE_PHYS_LAYER_CONNECT=41,10,8,-2 ;MODEM_STATE_REMOTE_INIT_RATE_RENEG=41,12,8,-2 ;MODEM_STATE_LOCAL_INIT_RATE_RENEG=41,13,8,-2 ;MODEM_STATE_REMOTE_INIT_RTRN=41,14,8,-2 ;MODEM_STATE_LOCAL_INIT_RTRN=41,15,8,-2 ;MODEM_STATE_ESCAPE=41,16,8,-2 ;MODEM_STATE_CLEARDOWN=41,17,8,-2 ;MODEM_STATE_D3=41,18,8,-2 ;MODEM_STATE_CALLER_ID_IN_PREGRESS=41,20,8,-2 ;MODEM_STATE_MOH=41,21,8,-2 ;MODEM_STATE_MOH_RESUMING=41,22,8,-2 ;MODEM_STATE_MOH_CLEARING_DOWN=41,23,8,-2 ;MODEM_STATE_PORT_TO_CLOSE=41,24,8,-2 ;MODEM_STATE_MODEM_STATE_LAST=41,25,8,-2 ;MOH_REMOTE_RESPONSE_ACK=103,500,32,-2 ;MOH_REMOTE_RESPONSE_NACK=103,501,32,-2 ;MOH_REMOTE_RESPONSE_SILENCE=103,502,32,-2 ;MOH_REMOTE_RESPONSE_DISCONNECT=103,503,32,-2 ;MOH_REMOTE_RESPONSE_NONE=103,504,32,-2 ;MOH_STATUS_CALLER_ID_PROCESSING=105,2,16,-2 ;MOH_STATUS_WAIT_FOR_USER_DECISION=105,3,16,-2 ;MOH_STATUS_REMOTE_REQ_ONHOLD=105,5,16,-2 ;MOH_STATUS_WAIT_FOR_CARRIER_SIGNAL=105,6,16,-2 ;MOH_STATUS_WAIT_FOR_MODULATION_DISCONNECT=105,7,16,-2 ;MOH_STATUS_NOT_SUPPORTED=105,8,16,-2 ;MOH_STATUS_WAIT_FOR_REMOTE_RECONNECT=105,9,16,-2 ;MOH_STATUS_WAIT_FOR_LOCAL_RECONNECT=105,10,16,-2 ;MOH_STATUS_WAIT_FOR_REMOTE_RESUME=105,11,16,-2 ;MOH_STATUS_OUTGOING_CALL_REQ=105,12,16,-2 ;MOH_STATUS_LAST=105,13,16,-2 [Frame] bottom=284 left=0 right=384 top=0 [OK Button] bottom=264 left=46 right=80 top=230 Disabled_x=394 Disabled_y=173 Pushed_x=394 Pushed_y=115 Released_x=394 Released_y=57 [Cancel Button] bottom=269 left=96 right=130 top=235 Disabled_x=439 Disabled_y=173 Pushed_x=439 Pushed_y=115 Released_x=439 Released_y=57 [Call Button] ShowButton=0 bottom=271 left=121 right=155 top=237 Disabled_x=484 Disabled_y=173 Pushed_x=484 Pushed_y=115 Released_x=484 Released_y=57 [Config Button] bottom=271 left=151 right=177 top=245 Disabled_x=529 Disabled_y=181 Pushed_x=529 Pushed_y=123 Released_x=529 Released_y=65 [Minimize Button] bottom=33 left=313 right=331 top=15 Disabled_x=500 Disabled_y=15 Pushed_x=447 Pushed_y=15 Released_x=394 Released_y=15 [Close Button] bottom=33 left=337 right=355 top=15 Disabled_x=424 Disabled_y=15 Pushed_x=471 Pushed_y=15 Released_x=418 Released_y=15 [Title] bottom=43 left=40 right=167 top=25 type=0 Format=1 Bold=1 color=0 FontName=Arial FontSize=13 AntiAlias=1 [Title2] bottom=234 left=220 right=375 top=212 type=0 Format=1 Bold=1 color=0 FontName=Arial FontSize=13 AntiAlias=1 [Header] bottom=67 left=41 right=344 top=53 type=0 Format=1 Bold=1 color=255 FontName= FontSize=0 AntiAlias=0 [Name] bottom=91 left=41 right=344 top=77 type=0 Format=0 Bold=1 color=0 FontName= FontSize=0 AntiAlias=0 [Number] bottom=107 left=41 right=344 top=93 type=0 Format=0 Bold=1 color=0 FontName= FontSize=0 AntiAlias=0 [ToDo1] bottom=149 left=41 right=344 top=119 type=1 Format=0 Bold=0 color=0 FontName= FontSize=0 AntiAlias=0 [ToDo2] bottom=184 left=41 right=344 top=154 type=1 Format=0 Bold=0 color=0 FontName= FontSize=0 AntiAlias=0 [Status] bottom=208 left=41 right=344 top=194 type=0 Format=1 Bold=1 color=0 FontName= FontSize=0 AntiAlias=0 [MOH] HoldTimer=3Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.