1. R35214.EXE Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (R35214.EXE)

Installation and upgrade instructions for

Bluetooth Software Suite 1.09

Build number:1.1.0711


##INDEX##

A. Installing Bluetooth Software Suite 1.09

B. Upgrading to Bluetooth Software Suite 1.09 from a previous version

C. Upgrading drivers for Bluetooth devices

   (Follow these steps if you are upgrading drivers in a current installation)

D. Firmware upgrading your Bluetooth USB dongle

E. Technical Support





** A

*Installing Bluetooth Software Suite 1.09*

1. If you received a Bluetooth Software Suite CD, insert it in your CD-ROM drive.

   If the installation does not start, you should manually initiate it:

   A. Open Windows Explorer

   B. Browse to the root of the CD

   C. Launch the file setup.exe by double-clicking on it.





** B

*Upgrading to Bluetooth Software Suite 1.09 from a previous version*


If you already own an older version of BTSWS and wants to upgrade to 1.09 then 
you have 2 options:

1. You can uninstall the older version and run this installation, or...

2. Run the new installation: The older version will be detected and you will 
   have the option to choose between manual or automatic un-install. 

 2a. Selecting "Manual" just exits the installer. 

 2b. Selecting "Automatically" uninstall the older version. When the uninstall 
     is complete, select "NO" to reboot. The installer will then complete the 
     installation of BTSWS 1.09.




** C


*Upgrading drivers for Bluetooth devices.*


1. Extract the files to a temporary location, for example c:\temp.

   This will extract the following subdirectories and files.

   \2000
   \9x
   \NT4
   readme.txt

2. On Windows 9x/ME and 2000, driver updates can be performed from the 
   Device Manager.

   Locate the related (Bluetooth) devices in the device list, right-click and select

   "Properties".
 
   From the Driver tab select "Update Driver". Windows will prompt for the location 
   of the new drivers.

3. Point to the location where you extracted the drivers to (see step 1, above).

4. Repeat this process for Bluetooth related device.

5. On Windows 2000 and Windows XP, you will be notified that the Bluetooth Ethernet 
   driver is unsigned. This is normal (This driver is currently going through the 
   process of being WHQL-tested and signed).


   NOTE:

   On Windows NT4 there is no formal method for updating drivers, so after having
   stopped the PCMCIA card, simply copy all the .sys files from the NT4 directory 
   (see #1 above) into the 

   %WINNT%\System32\Drivers directory.

   You should overwrite all duplicate drivers that Windows NT4 asks you about.




** D


*Firmware upgrading your Bluetooth USB dongle*


Firmware for the Bluetooth USB dongle is resident in the device and therefore 
must be manually updated using the enclosed dgabtUsbFlash.exe program. 

This program works on both Windows 9x and 2000.

After having applied the drivers for the device, run dgabtUsbFlash to upgrade your 
Bluetooth USB dongle with the new firmware.

The dgabtUsbFlash.exe file is distributed with the drivers, so you can find it in the 
root of the directory you extracted the files to (see step 1, above).

NOTE: Do NOT attempt to upgrade any other Bluetooth USB dongles than models that are 
      clearly marked "Digianswer", with this upgrade program. It may overwrite the 
      flash prom in a non-Digianswer product, rendering it useless.





** E

*Technical Support*



If you have trouble with installing or upgrading, please read our 
FAQ located at:

http://btsws.digianswer.com

If you are still unsuccesful in installing/upgrading, you can contact 
Digianswer Technical Support at:

mailto://support@digianswer.com