********************************************************* * Product: DOS Based Firmware Flash for HLDS GCR-8483B * Firmware Version: 1.10 * Target: HLDS GCR-8483B CD-ROM Drive * Date: October 3, 2005 ********************************************************* Note: You will need to provide a bootable DOS Floppy diskette or a bootable DOS Memory Key. This package does not contain DOS system files. Warning! Do not power cycle system during Firmware Flash Process. Firmware Flash Procedure 1. Copy the files extracted from the Zip package to a bootable DOS Floppy diskette or a bootable DOS Memory Key. 2. Boot to the bootable DOS Floppy diskette or bootable DOS Memory Key. 3. The autoexec.bat will run and the firmware flash will begin automatically. 4. When the firmware flash completes successfully remove the bootable DOS Floppy diskette or bootable DOS Memory Key. 5. Power cycle the System.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.