At the end of Bios flash procedure it is necessary to boot the system ,
exit to DOS and execute the related *.bat file in order to configure
the CMOS in one of the six different possible manners depending
on the used Operating System and M2-xxx MT serie model.
M2-233 Mt / M2-266 MT
Windows95 with IDE type W95_IDE.BAT
Windows95 with SCSI type W95_SCSI.BAT
Win.NT4.0/WfW 3.11 with IDE type NT4_IDE.BAT
Win.NT4.0/WfW 3.11 with SCSI type NT4_SCSI.BAT
M2-300 MT
Win.NT4.0/WfW 3.11 type NT4_300.BAT
Windows95 type W95_300.BAT
Only after this operation the Bios Upgrade procedure is complete
This diskette may be used for the Bios Recovery Procedure.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.