Dell PowerEdge RAID Controller 3/QC, 3/DC, 3/DCL, 3/SC, PERC 4/DI, and CERC ATA100/4CH, Device Driver for Netware 5.x. 6.x Important Information: ====================== This Device Driver is compatible with the following firmware versions: Controller Minimum firmware level Description ---------- ---------------------- ----------- PERC 3/QC 1.74 PERC 3 Quad Channel PERC 3/DC 1.74 PERC 3 Dual Channel PERC 3/DCL 1.74 PERC 3 Dual Channel Lite PERC 3/SC 1.74 PERC 3 Single Channel PERC 4/DI 2.01 PERC 4/DI CERC ATA100/4CH 6.62 RAID IDE Fixes or Enhancements ====================== Pedge3 Version 7.01n =================== Changes with respect to 6.02e 1. Fixed the interrupt and f/w command posted ‘ race condition’. 2. Updated the release notes for the supported controllers. 3 Suppressed the Enter Debugger for status SC_START_STOP, MEGA_LD_ERROR_ABORTED and MEGA_LD_ERROR_CORRECTED for logical drive. 4. The goToRealMode and exitToDOS routines modified to support for proper pending device request handling. 5. Suppressed the enter debugger for status SC_START_STOP, MEGA_LD_ERROR_ABORTED and MEGA_LD_ERROR_CORRECTED for logical drive. 6. Suppressed the enter debugger for status 5 for logical drive 7. Driver bugs fixed 8. Fixed the queue freeze issue that caused a certification test failure. 9. Fixed a faked command handling issue that led to a recursive Dellmgr invocation failure. 10.Fixed an issue when Open Manage service locks up NW6 server on PE6600 with 2 PERC 4 cards. 11.There was a driver bug in memory allocation routine that could cause a system hang or crash. This is fixed. 12.There is a possibility to fail to delete a Logical Drive randomly under extremely heavy I/O on that device going on. This is fixed. 13.There was a bug when you were spinning up or down a drive NW would abend. This is fixed. Megammio Version 1.02g ====================== Changes with respect to 1.02f 1. There is a filter to check the return value of NPA_HACB_Passthru API in the Mega_ASyncIO() function. In the filter, there is a chance to send the same request packet to the driver if the return value of NPA_HACB_Passthru API is NOT NULL. And if that happened, the system would crash. Dellmgr version 5.20 ====================== Changes with respect to 5.18 1.There was a bug reported in the utility. In the previous version, the utility was displaying bus/device number in the select adapter menu. This bug is fixed in this release. 2.The utility gives the user the option to view ongoing Init and Check Consistency/Background Init. progress now. Dellmon version 2.09 ====================== Changes with respect to 2.08 1. Distinction done between Check consistency and Background Initialization. Additional Information ====================== Usage of Dellmgr or Dellmon on systems with more than 2GB of memory, is possible ONLY AFTER the support pack 2, (Nw51sp2) for Netware 5.1 is applied, and the Server is restarted.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.