1. CERC-NW701n.exe Driver
2. Installl.txt File Contents

Installl.txt Driver File Contents (CERC-NW701n.exe)

Dell PowerEdge RAID Controller 3/QC, 3/DC, 3/DCL, 3/SC, 
PERC 4/DI, and CERC ATA100/4CH, Device Driver for NetWare.


Installation Instructions
=========================


1. Download the <xxxx>.exe to a directory on your hard drive. Where 
   <xxxx>.exe is the name of your file. The file downloaded is a 
   self-extracting executable.
2. Execute the download file that unzips the driver files to a floppy 
   diskette.

There are two methods for installing the Novell NetWare drivers and 
applications: 

Fresh Installation of the Netware Driver 
Follow the instructions in the Novell NetWare Installation Guide to 
install NetWare on the server. 
1. Boot to the Novell Netware OS CD
2. Follow the instructions on the screen until you reach the 
   Storage Driver Support screen. This screen is used to add, change 
   or delete drivers.
3. Select Storage Adapters on the Storage Driver Support screen.
4. Delete any existing PERC adapters.
5. Press "Insert" to add unlisted drivers. Press "Insert" again. A 
   path displays.
6. Insert the driver diskette created above into the floppy drive 
   and press "Enter".
7. The system finds the PEDGE3.HAM driver.
8. Return to the Driver Summary screen. Continue the installation.

Adding the Netware Driver to an Existing Installation 
======================================================
Follow the instructions to add the driver to an existing installation.
1. At the root prompt, type "NWCONFIG" and press "Enter".
2. The Installation Options screen displays. Select Drive Options 
   and press "Enter". A window displays.
3. Select Configure Disk, and Storage Device Options. Press "Enter".
4. Select one of the following options display in the window:
   Discover and load an additional driver.
   Select an additional driver.
5. If you select the option to discover and load an additional 
   driver, the system discovers the extra unit. You are prompted to 
   select a driver from the list. Press "Insert" to insert the driver. 
   This completes the procedure.
6. If you choose the option to select an additional driver, the 
   Select a Driver screen displays. Press "Insert". Read the instructions 
   that display.
7. Insert the driver diskette created above into the floppy drive 
   and press "Enter".
8. The system will find a driver and install it.