1. om38_nw_managed_systemA00.exe Driver
2. dcsdst32.ini File Contents

dcsdst32.ini Driver File Contents (om38_nw_managed_systemA00.exe)

¿; This is the data file for parsing
; Please do not remove this comment block

[ASCII EN_US DEFAULT STRING ID SECTION]
;-----------------------------------------------------------------------
;
; Invalid strings
;
;-----------------------------------------------------------------------

0:0=Invalid String

;-----------------------------------------------------------------------
;
; Strings that are used by the event logging system
; NOTE: There is a space after each string
;
;-----------------------------------------------------------------------

0:300=EventID:
0:301=Source:
0:302=Date and Time:
0:303=Computer:
0:304=Description:
0:305=Data: Bytes in Hex

0:310=Type: None
0:311=Type: Error
0:312=Type: Warning
0:313=Type: Information
0:314=Type: Audit Success
0:315=Type: Audit Failure

0:320=None
0:321=Log was cleared
0:322=Log was cleared
0:323=Log backup created
0:324=Log backup created

;-----------------------------------------------------------------------
;
; Bus modeling support strings
;
;-----------------------------------------------------------------------

0:400=Unknown
0:401=Mass-Storage Controller
0:402=Network Controller
0:403=Display Controller
0:404=Multimedia Device
0:405=Memory Controller
0:406=Bridge Device
0:407=Simple Communications Controller
0:408=Base System Peripheral
0:409=Input Device
0:40A=Docking Station
0:40B=Processor
0:40C=Serial Bus Controller
0:40D=Other Controller
0:40E=SCSI Controller
0:40F=IDE Controller
0:410=Floppy Controller
0:411=IPI Controller
0:412=RAID Controller
0:413=Ethernet Controller
0:414=Token Ring Controller
0:415=FDDI Controller
0:416=ATM Controller
0:417=VGA-compatible Controller
0:418=XGA Controller
0:419=Video Controller
0:41A=Audio Controller
0:41B=RAM Memory Controller
0:41C=Flash Memory Controller
0:41D=Host/PCI Bridge
0:41E=PCI/ISA Bridge
0:41F=PCI/EISA Bridge
0:420=PCI/Micro Channel Bridge
0:421=PCI/PCI Bridge
0:422=PCI/PCMCIA Bridge
0:423=NuBus Bridge
0:424=CardBus Bridge
0:425=Serial Port Controller
0:426=Parallel Port Controller
0:427=Programmable Interrupt Controller
0:428=DMA Controller
0:429=8254 Timer
0:42A=RTC Controller
0:42B=Keyboard Controller
0:42C=Digitizer
0:42D=Mouse Controller
0:42E=End

;-----------------------------------------------------------------------
;
; Strings used by the BIOS Setup Populator
;
;-----------------------------------------------------------------------

0:500=Num Lock
0:501=Diskette
0:502=NIC
0:503=Mouse
0:504=USB
0:505=IDE
0:506=Primary SCSI
0:507=Secondary SCSI
0:508=Tertiary SCSI
0:509=Boot Sequence
0:50A=Processor Serial Number
0:50B=Parallel Port
0:50C=Parallel Mode
0:50D=Serial Port 1
0:50E=Serial Port 2
0:50F=Speaker
0:510=Wake-On-LAN
0:511=Setup Password
0:512=System Password
0:513=NIC 2
0:514=USB
0:515=Chassis Intrusion
0:516=Bezel Intrusion
0:517=RAID On Motherboard
0:518=RAID Channel A
0:519=RAID Channel B
0:51A=Dual NIC
0:51B=NIC 1 PXE
0:51C=NIC 2 PXE
0:51D=Wake-On-LAN Boot Override
0:51E=Console Redirection
0:51F=Power Button
0:520=NMI Button
0:521=Console Redirection Failsafe BAUD Rate
0:522=AC Power Recovery Mode

;-----------------------------------------------------------------------
;
; Strings that are shared by various populators
;
;-----------------------------------------------------------------------

0:600=Unspecified
0:601=Unknown
0:602=System BIOS
0:603=Embedded System Management Controller
0:604=Power Supply Paralleling Board
0:605=Primary Backplane
0:606=Kernel
0:607=Application
0:608=Front panel controller
0:609=Baseboard Management Controller
0:60A=Hot Plug PCI Controller
0:60B=Sensor Data Records
0:60C=Peripheral bay backplane
0:60D=Secondary backplane
0:60E=System Power Unit
0:60F=System Cooling Unit
0:610=AC Failover Switch
0:611=AC Power Line 1
0:612=AC Power Line 2

;-----------------------------------------------------------------------
;
;	Strings that are used by the ESM2 populator
;
;-----------------------------------------------------------------------

0:700=SDS 100

;-----------------------------------------------------------------------
;
; 710-73F is system backplane
;
;-----------------------------------------------------------------------

0:710=Backplane Main
0:711=Backplane Control
0:712=Backplane Location 1
0:713=Backplane Location 2
0:714=Control Panel
0:715=Backplane battery
0:716=Backplane +5V
0:717=Backplane +12V
0:718=Backplane SCSI Reference
0:719=Main chassis intrusion
0:71A=Backplane fan control
0:71B=Hard Drive Fan 1
0:71C=Hard Drive Fan 2
0:71D=Hard Drive Fan 3
0:71E=SCSI A connected
0:71F=SCSI A external termination
0:720=SCSI A internal termination
0:721=SCSI B connected
0:722=SCSI B external termination
0:723=SCSI B internal termination
0:724=Disk drives 1-4
0:725=Disk drives 5-8
0:726=Disk drive 1
0:727=Disk drive 2
0:728=Disk drive 3
0:729=Disk drive 4
0:72A=Disk drive 5
0:72B=Disk drive 6
0:72C=Disk drive 7
0:72D=Disk drive 8
0:72E=Extra BP Info
0:72F=Backplane +3.3V

;-----------------------------------------------------------------------
;
; 740-75F is system backplane
;
;-----------------------------------------------------------------------

0:740=Peripheral Bay Backplane Main
0:741=Peripheral Bay Backplane Control
0:742=Peripheral Bay Backplane Location 1
0:743=Peripheral Bay Backplane Location 2
0:744=Peripheral Bay Control Panel
0:745=Peripheral Bay Backplane battery
0:746=Peripheral Bay Backplane +5V
0:747=Peripheral Bay Backplane +12V
0:748=Peripheral Bay Backplane SCSI Reference
0:749=Peripheral Bay Main chassis intrusion
0:74A=Peripheral Bay Backplane fan control
0:74B=Peripheral Bay Hard Drive Fan 1
0:74C=Peripheral Bay Hard Drive Fan 2
0:74D=Peripheral Bay Hard Drive Fan 3
0:74E=Peripheral Bay SCSI connected
0:74F=Peripheral Bay SCSI external termination
0:750=Peripheral Bay SCSI internal termination
0:751=Peripheral Bay SCSI B connected
0:752=Peripheral Bay SCSI B external termination
0:753=Peripheral Bay SCSI B internal termination
0:754=Peripheral Bay Disk drives 1-4
0:755=Peripheral Bay Disk drives 5-8
0:756=Peripheral Bay Disk drive 1
0:757=Peripheral Bay Disk drive 2
0:758=Peripheral Bay Disk drive 3
0:759=Peripheral Bay Disk drive 4
0:75A=Peripheral Bay Disk drive 5
0:75B=Peripheral Bay Disk drive 6
0:75C=Peripheral Bay Disk drive 7
0:75D=Peripheral Bay Disk drive 8
0:75E=Extra Peripheral Bay BP Info
0:75F=Peripheral Bay Backplane +3.3V

;-----------------------------------------------------------------------
;
; 760-76F is used for ESM2 system fans, MB unique
;
;-----------------------------------------------------------------------

0:760=Front System Fan
0:761=Rear System Fan
0:762=System Fan
0:763=Drive Bay Fan
0:764=CPU Fan
0:765=CPU 1 Fan
0:766=CPU 2 Fan
0:767=System Fan 1
0:768=System Fan 2
0:769=System Fan 3
0:76A=RAID On Motherboard Battery
0:76B=System Fan 4
0:76C=Power Supply Fan 1
0:76D=Power Supply Fan 2
0:76E=Power Supply Fan 3
0:76F=Power Supply Fan 4

;-----------------------------------------------------------------------
;
; 770-782 is harrier backplane
;
;-----------------------------------------------------------------------

0:770=SDS100 BP Control
0:771=Backplane Location 1
0:772=Backplane Location 2
0:773=Backplane +5V
0:774=Backplane +12V
0:775=SCSI A termination
0:776=Backplane battery
0:777=SCSI A connected
0:778=SCSI B connected
0:779=Control Panel
0:77A=SCSI B termination
0:77B=Fan 1
0:77C=Fan 2
0:77D=Fan 3
0:77E=Fan 1 current
0:77F=Fan 2 current
0:780=Fan 3 current
0:781=SDS100 chassis intrusion
0:782=SDS 100 backplane control

;-----------------------------------------------------------------------
;
; 783-784 are used as overrides for 2 of the GEM peripheral bay
;         backplane sensors
;
;-----------------------------------------------------------------------

0:783=Peripheral Bay Backplane
0:784=Peripheral Bay SCSI A external termination

;-----------------------------------------------------------------------
;
; 785-79F is harrier PSPB
;
;-----------------------------------------------------------------------

0:785=SDS100 PSPB Control
0:786=Power supply 2 +5V
0:787=Power supply 1 +5V
0:788=Power supply 2 +3.3V
0:789=Power supply 1 +3.3V
0:78A=Power supply 2 +12V
0:78B=Power supply 1 +12V
0:78C=System power supply +5V
0:78D=System power supply +3.3V
0:78E=System power supply +12V
0:78F=System power supply -5V
0:790=System power supply -12V
0:791=System power supply +5V aux
0:792=Power supply 2 +5v
0:793=Power supply 1 +5v
0:794=Power supply 2 +3.3v
0:795=Power supply 1 +3.3v
0:796=Power supply 2 +12v
0:797=Power supply 1 +12v
0:798=Power supply 2 Fan
0:799=Power supply 1 Fan
0:79A=Power supply 2
0:79B=Power supply 1
0:79C=Power supply 2
0:79D=Power supply 1

;-----------------------------------------------------------------------
;
; 7A0-7CF is system PSPB
;
;-----------------------------------------------------------------------

0:7A0=System PSPB
0:7A1=Power supply 1 +5V
0:7A2=Power supply 1 +12V
0:7A3=Power supply 1 +3.3V
0:7A4=Power supply 1 -5V
0:7A5=Power supply 1 -12V
0:7A6=Power supply 2 +5V
0:7A7=Power supply 2 +12V
0:7A8=Power supply 2 +3.3V
0:7A9=Power supply 2 -5V
0:7AA=Power supply 2 -12V
0:7AB=Power supply 3 +5V
0:7AC=Power supply 3 +12V
0:7AD=Power supply 3 +3.3V
0:7AE=Power supply 3 -5V
0:7AF=Power supply 3 -12V
0:7B0=System power supply +5V
0:7B1=System power supply +12V
0:7B2=System power supply +3.3V
0:7B3=System power supply -5V
0:7B4=System power supply -12V
0:7B5=System power supply +5V Flea
0:7B6=Power supply 1 +5v
0:7B7=Power supply 1 +12v
0:7B8=Power supply 1 +3.3v
0:7B9=Power supply 2 +5v
0:7BA=Power supply 2 +12v
0:7BB=Power supply 2 +3.3v
0:7BC=Power supply 3 +5v
0:7BD=Power supply 3 +12v
0:7BE=Power supply 3 +3.3v
0:7BF=Power supply 1 Fan
0:7C0=Power supply 2 Fan
0:7C1=Power supply 3 Fan
0:7C2=Power supply 1
0:7C3=Power supply 2
0:7C4=Power supply 3
0:7C5=PSPB Fan control
0:7C6=Fan 1
0:7C7=Fan 2
0:7C8=Fan 3
0:7C9=Fan 4
0:7CA=Fan 5
0:7CB=Fan 6
0:7CC=Fan enclosure

;-----------------------------------------------------------------------
;
; 7D0-7FF is system motherboard
;
;-----------------------------------------------------------------------

0:7D0=Motherboard Control
0:7D1=CPU 1
0:7D2=CPU 2
0:7D3=CPU 3
0:7D4=CPU 4
0:7D5=Motherboard
0:7D6=Ambient
0:7D7=Processor 1 core
0:7D8=Processor 2 core
0:7D9=Processor 3 core
0:7DA=Processor 4 core
0:7DB=Motherboard +5V
0:7DC=Motherboard +12V
0:7DD=Motherboard +3.3V
0:7DE=Motherboard +2.5V
0:7DF=Motherboard GTL Termination
0:7E0=Motherboard Battery
0:7E1=Main chassis intrusion
0:7E2=Main chassis fan control
0:7E3=Fan 1
0:7E4=Fan 2
0:7E5=Fan 3
0:7E6=Power Supply Fan
0:7E7=Processor 1 cache
0:7E8=Processor 2 cache
0:7E9=Processor 3 cache
0:7EA=Processor 4 cache
0:7EB=Power supply control
0:7EC=Power supply 1
0:7ED=Power supply 2
0:7EE=Motherboard +1.5V
0:7EF=RAID On Motherboard Battery
0:7F0=Hot Plug Status
0:7F1=PCI Slot 1
0:7F2=PCI Slot 2
0:7F3=PCI Slot 3
0:7F4=PCI Slot 4
0:7F5=PCI Slot 5
0:7F6=PCI Slot 6
0:7F7=PCI Slot 7
0:7F8=Processor 1 cartridge
0:7F9=Processor 2 cartridge
0:7FA=Processor 3 cartridge
0:7FB=Processor 4 cartridge
0:7FC=Embedded Gigabit NIC +1.8V
0:7FD=Embedded Gigabit NIC +2.5V
0:7FE=Memory +3.3V
0:7FF=Video +2.5V
0:738=Power Button Control
0:739=Power supply 3
0:73A=Fan 4
0:73B=Power Supply Fan 2
0:73C=Power Supply Fan 3
0:73D=Power Supply Fan 4
0:73E=AC Failover Switch
0:73F=Over Temperature Sensor

;-----------------------------------------------------------------------
;
; Strings that are used by the OS populator
;
;-----------------------------------------------------------------------

0:800=Please set the value
0:801=Microsoft Windows NT
0:802=Windows
0:803=Novell NetWare 
0:804=Advanced Server
0:805=Professional
0:806=Domain Controller
0:807=Microsoft Windows 2000
0:808=Microsoft Windows XP
0:809=Server
0:80A=Data Center Server
0:80B=Personal
0:80C=Enterprise Edition
0:80D=Microsoft high availability cluster
0:80E=Microsoft Windows Server 2003
0:80F=Web Edition
0:810=Datacenter Edition
0:811=Standard Edition
0:812=Enterprise Edition
0:813=Small Business Server
0:814=,


;-----------------------------------------------------------------------
;
; OEM strings
;  OEM strings consist of base string ID for the Dell values
;  An OEM string consists of the Dell base plus an offset for the OEM
;  Current assignments:
;  Unisys offset =  0x80
;
;-----------------------------------------------------------------------
; Base strings for Dell
0:900=Dell Inc.
0:901=Server Administrator
0:902=Management software for Dell systems.
0:903=Server Administrator Event Monitor
0:904=Server Administrator starting
0:905=Server Administrator startup complete
0:906=PowerVault 20xS
0:907=PowerVault 21xS
0:908=PowerVault 22xS
0:909=Systems Management Data Manager Started
0:90A=Systems Management Data Manager Stopped
0:90B=PowerVault 21XA

;Unisys at offset 0x80
0:980=Unisys Corporation
0:981=Server Administrator
0:982=Management software
0:983=Server Administrator Event Monitor
0:984=Server Administrator starting
0:985=Server Administrator startup complete
0:986=Unisys 8 bay external storage
0:987=ESM4000
0:989=Systems Management Data Manager Started
0:98A=Systems Management Data Manager Stopped


;-----------------------------------------------------------------------
;
; Strings which are used as miscellaneous by various components
;
;-----------------------------------------------------------------------

0:A00=Dell Baseboard Agent
0:A01=Dell Local Response Agent
0:A02=Main System Chassis
0:A03=Dell Server
0:A04=Dell Workstation
0:A05=Dell Desktop
0:A06=Dell Portable
0:A07=Dell NetPC
;  0:A08=Dell Inc.  // moved to OEM
0:A09=Dell PowerEdge XP/ME
0:A0A=Dell PowerEdge 4100
0:A0B=Dell PowerEdge 2100
0:A0C=Dell PowerEdge 6100
0:A0D=Dell PowerEdge 2200
0:A0E=Dell PowerEdge 4200
0:A0F=Dell PowerEdge 8450
0:A10=Unknown
0:A11=Not applicable
0:A12=Internal
0:A13=External
0:A14=Embedded
; 0:A15=Dell OpenManage Server Agent		// moved to OEM
; 0:A16=Management software for Dell systems	// moved to OEM
0:A17=01/01/2000
; 0:A18=Dell OpenManage Event Monitor		// moved to OEM
0:A19=No Updates
0:A1A=External Chassis
0:A1B=None

;-----------------------------------------------------------------------
;
; Strings that are used by event processor
;
;-----------------------------------------------------------------------

; 0:B00=Dell OpenManage Server Agent starting		// moved to OEM
; 0:B01=Dell OpenManage Server Agent startup complete	// moved to OEM
0:B02=A system BIOS update has been scheduled for the next reboot
0:B03=A previously scheduled system BIOS update has been canceled
0:B04=Thermal shutdown protection has been initiated
0:B05=SMBIOS data is absent
0:B06=Automatic System Recovery (ASR) action was perfomed
0:B07=User initiated host system control action


0:B10=Previous state was: Unknown
0:B11=Previous state was: Other
0:B12=Previous state was: OK (Normal)
0:B13=Previous state was: Non-Critical (Warning)
0:B14=Previous state was: Critical (Failed)
0:B15=Previous state was: Non-Recoverable

0:B20=Temperature sensor has failed
0:B21=Temperature sensor value unknown
0:B22=Temperature sensor returned to a normal value
0:B23=Temperature sensor detected a warning value
0:B24=Temperature sensor detected a failure value
0:B25=Temperature sensor detected a non-recoverable value

0:B30=Fan sensor has failed
0:B31=Fan sensor value unknown
0:B32=Fan sensor returned to a normal value
0:B33=Fan sensor detected a warning value
0:B34=Fan sensor detected a failure value
0:B35=Fan sensor detected a non-recoverable value

0:B40=Voltage sensor has failed
0:B41=Voltage sensor value unknown
0:B42=Voltage sensor returned to a normal value
0:B43=Voltage sensor detected a warning value
0:B44=Voltage sensor detected a failure value
0:B45=Voltage sensor detected a non-recoverable value

0:B50=Current sensor has failed
0:B51=Current sensor value unknown
0:B52=Current sensor returned to a normal value
0:B53=Current sensor detected a warning value
0:B54=Current sensor detected a failure value
0:B55=Current sensor detected a non-recoverable value

0:B60=Chassis intrusion sensor has failed
0:B61=Chassis intrusion sensor value unknown
0:B62=Chassis intrusion returned to normal
0:B63=Chassis intrusion in progress
0:B64=Chassis intrusion detected
0:B65=Chassis intrusion sensor detected a non-recoverable value

0:B70=Power supply sensor has failed
0:B71=Power supply sensor value unknown
0:B72=Power supply returned to normal
0:B73=Power supply detected a warning
0:B74=Power supply detected a failure
0:B75=Power supply sensor detected a non-recoverable value

0:B80=Redundancy sensor has failed
0:B81=Redundancy sensor value unknown
0:B82=Redundancy not applicable
0:B83=Redundancy is offline
0:B84=Redundancy regained
0:B85=Redundancy degraded
0:B86=Redundancy lost

0:B90=Previous redundancy state was: Sensor failed
0:B91=Previous redundancy state was: Unknown
0:B92=Previous redundancy state was: Not applicable
0:B93=Previous redundancy state was: Offline
0:B94=Previous redundancy state was: Normal
0:B95=Previous redundancy state was: Degraded
0:B96=Previous redundancy state was: Lost

0:BA0=Memory device monitoring has been disabled
0:BA1=Memory device status is unknown
0:BA2=Memory device status is normal
0:BA3=Memory device status is non-critical
0:BA4=Memory device status is critical
0:BA5=Memory device status is non-recoverable

0:BA6=Possible memory module event cause:
0:BA7=Single bit warning error rate exceeded
0:BA8=Single bit failure error rate exceeded
0:BA9=Multi bit error encountered
0:BAA=Single bit error logging disabled
0:BAB=DIMM disabled via spare bank activation

0:BB0=Fan enclosure sensor has failed
0:BB1=Fan enclosure sensor value unknown
0:BB2=Fan enclosure inserted into system
0:BB3=Fan enclosure removed from system
0:BB4=Fan enclosure removed from system for an extended amount of time
0:BB5=Fan enclosure sensor detected a non-recoverable value

0:BC0=AC Power cord sensor has failed
0:BC1=AC Power cord is not being monitored
0:BC2=AC Power has been restored
0:BC3=AC Power has been lost
0:BC4=AC Power has been lost
0:BC5=AC Power has been lost

0:BD0=Log monitoring has been disabled
0:BD1=Log status is unknown
0:BD2=Log size is no longer near or at capacity
0:BD3=Log size is near or at capacity
0:BD4=Log size is full
0:BD5=Log sensor has failed

0:BE0=Sensor location:
0:BE1=Chassis location:
0:BE2=Temperature sensor value (in Degrees Celsius):
0:BE3=Fan sensor value (in RPM):
0:BE4=Fan sensor value: Off
0:BE5=Fan sensor value: On
0:BE6=Voltage sensor value (in Volts):
0:BE7=Current sensor value (in Amps):
0:BE8=Chassis intrusion state: Open
0:BE9=Chassis intrusion state: Closed
0:BEA=Chassis intrusion state: Opened prior to OS boot
0:BEB=Number of devices required for full redundancy:
0:BEC=Power supply input AC is off
0:BED=Power supply switch is off
0:BEE=Power supply POK signal is not normal
0:BEF=Power supply is turned off
0:BF0=Power supply fan has failed
0:BF1=Memory device location:
0:BF2=Memory device bank location:
0:BF3=Pre-failure sensor error count value:
0:BF4=Redundancy unit:
0:BF5=Log type: ESM
0:BF6=Log type: POST

0:BFF=The maximum number of alert popups has been reached. Check the log file for additional messages.

0:C00=Action performed was: Unknown
0:C01=Action performed was: Reboot
0:C02=Action performed was: Power off
0:C03=Action performed was: Power cycle
0:C04=Date and time of action:

0:C10=Action requested was: Unknown
0:C11=Action requested was: Reboot
0:C12=Action requested was: Power off
0:C13=Action requested was: Power cycle
0:C14=Action requested was: Reboot, shutdown OS first
0:C15=Action requested was: Power off, shutdown OS first
0:C16=Action requested was: Power cycle, shutdown OS first
0:C17=Action requested was: Clear HostControl, no action pending

0:C20=Power Supply type: Other
0:C21=Power Supply type: Unknown
0:C22=Power Supply type: Linear
0:C23=Power Supply type: Switching
0:C24=Power Supply type: Battery
0:C25=Power Supply type: UPS
0:C26=Power Supply type: Converter
0:C27=Power Supply type: Regulator
0:C28=Power Supply type: AC
0:C29=Power Supply type: DC
0:C2A=Power Supply type: VRM

0:C30=Power Supply state: Other
0:C31=Power Supply state: Unknown
0:C32=Power Supply state: Presence detected
0:C33=Power Supply state: Failure detected
0:C34=Power Supply state: Predictive failure
0:C35=Power Supply state: AC lost
0:C36=Power Supply state: AC lost or out of range
0:C37=Power Supply state: AC present but out of range
0:C38=Power Supply state: Configuration error

0:C40=Configuration error type: Other
0:C41=Configuration error type: Unknown
0:C42=Configuration error type: Vendor mismatch
0:C43=Configuration error type: Revision mismatch
0:C44=Configuration error type: Processor missing

0:C50=Processor sensor has failed
0:C51=Processor sensor value unknown
0:C52=Processor sensor returned to a normal value
0:C53=Processor sensor detected a warning value
0:C54=Processor sensor detected a failure value
0:C55=Processor sensor detected a non-recoverable value

0:C60=Processor sensor status: Other
0:C61=Processor sensor status: Unknown
0:C62=Processor sensor status: IERR
0:C63=Processor sensor status: Thermal trip
0:C64=Processor sensor status: Configuration error
0:C65=Processor sensor status: Presence detected
0:C66=Processor sensor status: Disabled
0:C67=Processor sensor status: Term presence detected
0:C68=Processor sensor status: Throttled

0:C70=Discrete voltage state: Other
0:C71=Discrete voltage state: Unknown
0:C72=Discrete voltage state: Good
0:C73=Discrete voltage state: Bad

0:C80=Discrete temperature state: Other
0:C81=Discrete temperature state: Unknown
0:C82=Discrete temperature state: Good
0:C83=Discrete temperature state: Bad

0:C90=Discrete current state: Other
0:C91=Discrete current state: Unknown
0:C92=Discrete current state: Good
0:C93=Discrete current state: Bad

;-----------------------------------------------------------------------
;
; Strings that are used by Slot, Memory, Bus populator
;
;-----------------------------------------------------------------------

0:D01=PC/XT or compatible (83-key) keyboard
0:D02=Olivetti "ICO" (102-key) keyboard
0:D03=PC/AT (84-key) or similar keyboard
0:D04=Enhanced (101- or 102-key) keyboard
0:D05=Nokia 1050 or similar keyboard
0:D06=Nokia 9140 or similar keyboard
0:D07=Japanese keyboard

; Base Board Types

0:D20=Unknown
0:D21=Other
0:D22=Server Blade
0:D23=Connectivity Switch
0:D24=System Management Module
0:D25=Processor Module
0:D26=I/O Module
0:D27=Memory Module
0:D28=Daughter Board
0:D29=Motherboard
0:D2A=Processor/Memory Module
0:D2B=Processor/IO Module
0:D2C=Interconnect Board

; Portable Battery

0:DA0=Other
0:DA1=Unknown
0:DA2=Lead Acid
0:DA3=Nickel Cadmium
0:DA4=Nickel Metal Hydride
0:DA5=Lithium Ion
0:DA6=Zinc Air
0:DA7=Lithium Polymer


;-----------------------------------------------------------------------
;
; Strings that are used by the SES populator
;
;-----------------------------------------------------------------------
0:E01=Chassis Backplane
0:E02=Fan
0:E03=Power Supply
0:E04=EMM1
0:E05=EMM2
0:E06=Chassis Backplane 1
0:E07=Chassis Backplane 2
; 0:E04=PowerVault 20xS		// moved to OEM
; 0:E05=PowerVault 21xS		// moved to OEM


;-----------------------------------------------------------------------
;
; Strings that are used by the TVM populator
;
;-----------------------------------------------------------------------

; TVM3 Sensors

0:F00=Invalid Sensor
0:F01=Main chassis intrusion
0:F02=CPU number position bitmap
0:F03=CPU 1 VID
0:F04=Motherboard +3.3V
0:F05=Motherboard +5V
0:F06=Motherboard +12V
0:F07=Processor 1 core
0:F08=Processor 2 core
0:F09=Motherboard GTL Termination
0:F0A=Hard drive
0:F0B=Ambient
0:F0C=CPU 1
0:F0D=CPU 2
0:F0E=Chassis Fan
0:F0F=Power Supply Fan
0:F10=Fan 3

; TVM4 Sensors

0:F20=Invalid Sensor
0:F21=Main chassis intrusion
0:F22=CPU number position bitmap
0:F23=CPU 1 VID
0:F24=CPU 2 VID
0:F25=Motherboard +3.3V
0:F26=Motherboard +5V
0:F27=Motherboard +12V
0:F28=Motherboard +2.5V
0:F29=System power supply +5V aux
0:F2A=Processor 1 core
0:F2B=Processor 2 core
0:F2C=Motherboard GTL Termination 1
0:F2D=Motherboard GTL Termination 2
0:F2E=Hard Drive
0:F2F=Motherboard Ambient
0:F30=CPU 1
0:F31=CPU 2
0:F32=Chassis Fan 1
0:F33=Chassis Fan 2
0:F34=Power Supply Fan
0:F35=Backplane +3.3V
0:F36=Backplane +5V
0:F37=Backplane +12V
0:F38=Backplane SCSI Termination
0:F39=Backplane Hard Drive
0:F3A=Backplane Ambient
0:F3B=Power Supply Fan
0:F3C=Chassis Fan 1
0:F3D=Chassis Fan 2
0:F3E=Chassis Fan 3
0:F3F=Chassis Fan 4
0:F40=Chassis Fan 5
0:F41=Chassis Fan 6
0:F42=Chassis Fan 7
0:F43=Chassis Fan 8

; TVM5 Sensors

0:F50=Invalid Sensor
0:F51=Motherboard +3.3V
0:F52=Motherboard +5V
0:F53=Motherboard +12V
0:F54=Motherboard -12V
0:F55=Motherboard GTL Termination
0:F56=Processor core
0:F57=Motherboard Ambient
0:F58=Chassis Fan 1
0:F59=Chassis Fan 4
0:F5A=Chassis Fan 2
0:F5B=Chassis Fan 5
0:F5C=Chassis Fan 3
0:F5D=CPU VID

; TVM6 Sensors

0:F60=Invalid Sensor
0:F61=CPU number position bitmap
0:F62=CPU 1 VID
0:F63=Motherboard +3.3V
0:F64=Motherboard +5V
0:F65=Motherboard +12V
0:F66=Motherboard +2.5V
0:F67=Processor 1 core
0:F68=Motherboard Ambient
0:F69=CPU 1
0:F6A=PCI Blower Fan
0:F6B=System Fan
0:F6C=Chassis Fan 3
0:F6D=Chassis Fan 4
0:F6E=CPU 2
0:F6F=CPU 2 VID
0:F70=CPU 1 GTL (VTT)
0:F71=VCC_CMOS
0:F72=VL +2.5V
0:F73=StandBy +3.3V
0:F74=Power FLEA +5V
0:F75=VCC HE +2.5V
0:F76=Processor 2 core
0:F77=Backplane Terminal Power +2.5V
0:F78=Backplane +3.3V
0:F79=Backplane +5V
0:F7A=Backplane +12V
0:F7B=Backplane Ambient
0:F7C=PSDB PowerSupply 1 Fan 1
0:F7D=PSDB PowerSupply 1 Fan 2
0:F7E=PSDB PowerSupply 2 Fan 1
0:F7F=PSDB PowerSupply 2 Fan 2
0:F80=PSDB +3.3V
0:F81=PSDB +5V
0:F82=PSDB +12V
0:F83=Chassis Intrusion
0:F84=Motherboard +2.7V
0:F85=Power Supply 1
0:F86=Power Supply 2
0:F87=Chassis Fan
0:F88=Chassis Fan 1
0:F89=Chassis Fan 2
0:F8A=CPU Voltage
0:F8B=Memory Termination Voltage
0:F8C=2.5V Voltage
0:F8D=3.3V Voltage
0:F8E=5V Voltage
0:F8F=12V Voltage
0:F90=CPU Fan
0:F91=Back System Fan
0:F92=IMB Voltage
0:F93=1.5V LAN Voltage
0:F94=VGA 2.5V Voltage
0:F95=3.3VSB Voltage
0:F96=5VSB Voltage
0:F97=Front System Fan
0:F98=3V Battery
0:F99=-12V A2D
0:F9A=+12V
0:F9B=VTT Voltage
0:F9C=2.5V Planar
0:F9D=1.5V Planar
0:F9E=CPU VRM Voltage
0:F9F=5V AUX
0:FA0=2.5V LAN
0:FA1=1.5V LAN
0:FA2=1.8V SCSI
0:FA3=PSDB Present Bit Mask
0:FA4=+5V
0:FA5=3.3V A2D
0:FA6=CPU 1 Temp
0:FA7=CPU 2 Temp
0:FA8=Front FAN RPM
0:FA9=Rear FAN RPM
0:FAA=CPU 1 FAN RPM
0:FAB=CPU 2 FAN RPM
0:FAC=CPU Voltage
0:FAD=Planar Temp
0:FAE=3.3VSB
0:FAF=1.2V LAN
0:FB0=2.5V VGA
0:FB1=Battery Voltage
0:FB2=Memory Fan
0:FB3=PCI Fan
0:FB4=CPU 1 Fan
0:FB5=3.3V Standby Voltage
0:FB6=Core Voltage
0:FB7=2.6V MB
0:FB8=1.5V MB
0:FB9=5V AUX
0:FBA=1.2V LAN2
0:FBB=1.2V LAN1
0:FBC=CPU Fan
0:FBD=Memory Fan
0:FBE=PCI Fan
0:FBF=Front Fan
0:FC0=Back Fan
0:FC1=System Fan 6
0:FC2=System Temp
0:FC3=CPU Temp
0:FC4=1.8V LAN
0:FC5=3.3V MB
0:FC6=3.3V AUX
0:FC7=5V MB
0:FC8=12V MB
0:FC9=VTT Voltage

; SBPP POST Results Bitmap
0:1000=Channel 2 Time Error
0:1001=Master PIC (8259 #1) error
0:1002=Slave PIC (8259 #2) error
0:1003=CMOS Battery Failure
0:1004=CMOS System Options Not Set
0:1005=CMOS Checksum Error
0:1006=CMOS Configuration Error
0:1007=Mouse and Keyboard Swapped
0:1008=Keyboard Locked
0:1009=Keyboard Not Functional
0:100A=Keyboard Controller Not Found
0:100B=CMOS Memory Size Different
0:100C=Memory Decreased in Size
0:100D=Cache Memory Error
0:100E=Floppy Drive 0 Error
0:100F=Floppy Drive 1 Error
0:1010=Floppy Controller Failure
0:1011=Number of ATA Drives Reduced Error
0:1012=CMOS Time Not Set
0:1013=DDC Monitor Configuration Change
0:1027=PCI Memory Conflict
0:1028=PCI I/O Conflict
0:1029=PCI IRQ Conflict
0:102A=PNP Memory Conflict
0:102B=PNP 32 bit Memory Conflict
0:102C=PNP I/O Conflict
0:102D=PNP IRQ Conflict
0:102E=PNP DMS Conflict
0:102F=Bad PNP Serial ID Checksum
0:1030=Bad PNP Resource Data Checksum
0:1031=Static Resource Conflict
0:1032=NVRAM Checksum Error, NVRAM Cleared
0:1033=System Board Device Resource Conflict
0:1034=Primary Output Device Not Found
0:1035=Primary Input Device Not Found
0:1036=Primary Boot Device Not Found
0:1037=NVRAM Cleared By Jumper
0:1038=NVRAM Data Invalid, NVRAM Cleared
0:1039=FDC Resource Conflict
0:103A=Primary ATA Controller Resource Conflict
0:103B=Secondary ATA Controller Resource Conflict