This document contains information on the following topics:
1.0 Overview
2.0 Installation Notes
3.0 Example Configuration File
-------------------------------------------------------------------------
1.0 Overview
------------
To install the 10/100 PCMCIA ethernet adapter driver, Microsoft Network
Client 3.0 for MS-DOS users please also refer to the following:
-------------------------------------------------------------------
File Description/Installation Notes
-------------------------------------------------------------------
INST_DOS.TXT Overall Installation for DOS users,
including users of Windows 3.1/3.11.
\NDIS2\README.TXT Overall installation notes for all NDIS users
2.0 Installation Notes
-------------------------
There are two methods to install 10/100 PCMCIA ethernet adapter drivers.
2.1 Method 1
--------------
1. Please Change to the Microsoft Network Client subdirectory,
and run SETUP.EXE. (default directory is C:\NET)
2. Respond to the screen prompts, then choose Change Network
Configuration and press Enter.
3. Choose Add Adapter and press Enter.
4. Select "Network adapter not shown on list below ...".
5. Insert the driver diskette into the drive A or B
6. Please specify the location of the OEM driver
Ex: A:\NDIS2\DOS
7. Choose Add Protocol.
8. Copy the EN100.EXE file into your C:\LANMAN directory.
Add the following statement to your CONFIG.SYS file:
device=c:\LANMAN\EN100.EXE /IRQ:5 /IOP:300
9. Simply pressing Enter to accept default values.
Follow onscreen instructions to complete the process,
then restart your computer.
2.2 Method 2
-------------
1. Execute SETUP.EXE from Microsoft Network Client for DOS
release diskette.
2. Specify the <target path> which Microsoft Network Client for
DOS files will been copy.
3. Select "Network adapter not shown on list below ...".
4. Insert the driver diskette into the drive A or B.
5. Please specify the location of the OEM driver
Ex: A:\NDIS2\DOS
6. Select "10/100 PCMCIA Ethernet adapter ".
7. Select "Change Network Configuration", "Add Protocol" as you
want.
8. Copy the EN100.EXE file into your C:\LANMAN directory.
Add the following statement to your CONFIG.SYS file:
device=c:\LANMAN\EN100.EXE /IRQ:5 /IOP:300
9. Follow screen instructions to complete the process. Simply
pressing <Enter> for each screen display will select the
default options. Press <Enter> until you reach the display
prompting you to reboot your system.
3.0 Example Configuration File
-------------------------------
The PROTOCOL.INI file will be created automatically
while running INSTALL.EXE. The following is an example:
*** Example PROTOCOL.INI file: ***
------------------------------------------------
[network.setup]
version=0x3110
netcard=LNAX100,1,LNAX100,1
transport=ms$ndishlp,MS$NDISHLP
transport=ms$netbeui,MS$NETBEUI
lana0=LNAX100,1,ms$netbeui
lana1=LNAX100,1,ms$ndishlp
[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP
[MS$NDISHLP]
DriverName=ndishlp$
BINDINGS=LNAX100
[MS$NETBEUI]
DriverName=netbeui$
SESSIONS=10
NCBS=12
BINDINGS=LNAX100
LANABASE=0
[LNAX100]
DriverName=LNAX100$
IOADDRESS=300
INTERRUPT=11
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.