################################################################################
Name: RSET8029.002
Version: V0.002
Released By: KEN
Release Date: 1996.08.30
Changed File:
Reason: for Realtek RTL8129 fast ethernet controller
10 Mb/s 100 Mb/s
################################################################################
Name: RSET8129.100
Version: V1.00
Released By: KEN
Release Date: 1996.11.30
Changed File: 93468129.asm
Reason: Fix the bug of the PCS mode (100M) for Switching Hub
################################################################################
Name: RSET8129.102
Version: V1.02
Released By: KEN
Release Date: 1997.1.30
Changed File: 93468129.asm
Reason: Fix the bug for RTL8140(E)
- can't connect the Dumb Hub (100M) immediatelly
################################################################################
Name: RSET8129.103
Version: V1.03
Released By: KEN
Release Date: 1997.1.30
Changed File: 93468129.asm
Reason: Fix the bug of the PCS mode for TxRx
################################################################################
Name: RSET8129.110
Version: V1.10
Released By: KEN
Release Date: 7/16/1997
Changed File: 93468129.asm
rset8129.c
Reason: Check link partner to decide whether
the duplex mode can be set up.
################################################################################
Name: RSET8139.200
Version: V 2.00
Released By: KEN
Release Date: 1997.08.28
Changed File: 93468139.asm
rset8139.c
Reason: Check link change bit in isr and dynamic change analog
parameter
################################################################################
Name: RSET8139.210
Version: V 2.10
Released By: KEN
Release Date: 1997.08.28
Changed File: 93468139.asm
rset8139.c
Reason: Change the method of Loopback test
Force 100Mbps for twister loopback
################################################################################
Name: RSET8139.230
Version: V 2.30
Released By: KEN
Release Date: 1997.10.08
Changed File: 93468139.asm
rset8139.c
Reason: Network Test - clear error packet interrupt status when
adapter receive the error packet.
################################################################################
Name: RSET8139.300
Version: V 3.00
Released By: KEN
Release Date: 1997.11.03
Changed File: 93468139.asm
rset8139.c
Reason: 1. Add medium_type (AUTO, 100Full,100, 10Full and 10Half) to
the set up configuration.
2. Add Driver_Load bit checking.
################################################################################
Name: RSET8139.301
Version: V 3.01
Released By: KEN
Release Date: 1998.03.03
Changed File: 93468139.asm
Reason: When cable length is changed from A=7 to A=3,
the parameter is re-written (bb->cb).
################################################################################
Name: RSET8139.400
Version: V 4.00
Released By: KEN
Release Date: 1998.07.31
Changed File: rset8139.c
93468139.asm
Reason: Add wake up function for 8139A.
Send magic packet and wakeup frame.
Modify wakeup setting.
################################################################################
Name: RSET8139.401
Version: V 4.01
Released By: KEN
Release Date: 1998.09.09
Changed File: 93468139.asm
Reason: Modify ISR routine for network test.
Send ACK packet and wait to respond the Initiatior in ISR.
Clear TCR Abort bit to solve the busy traffic on the network.
################################################################################
Name: RSET8139.402
Version: V 4.02
Released By: KEN
Release Date: 1998.10.22
Changed File: 93468139.asm
Reason: Fix power management routine for specific main board.
Clear ISR after master machine sends a wakeup frame packet.
################################################################################
Name: RSET8139.403
Version: V 4.03
Released By: KEN
Release Date: 1999.3.11
Changed File: rset8139.c 93468139.asm
Reason: 1. Identify RTL8139A, RTL8139B and RTL8130
2. EEPROM Test (9346,9356)
3. Setup LWACT
4. Setup RTL8130 Medium
5. Loopback Test -one time sw reset
6. Network Test - Fix Rx wrap bug
################################################################################
Name: RSET8139.500
Version: V 5.00
Released By: KEN
Release Date: 1999.7.22
Changed File: rset8139.c 93468139.asm
Reason: Initialize Wakeup Frame Register
Enable Wakeup Frame Function in ACPI Test
################################################################################
Name: RSET8139.501
Version: V 5.01
Released By: KEN
Release Date: 2000.1.13
Changed File: rset8139.c 93468139.asm
Reason: 1. Identify RTL8139C ID in TCR
2. Do cable test before loopback test
################################################################################
Name: Rset8139.503
Version: v5.03
Release: KEN
Release: 2001.12.7
Change File: Rset8139.c 93468139.asm
Reason: 1. Loopack test failure during the cable disconnecting
2. Solve the network test with the P4 CPU.
################################################################################
Name: Rset8139.504
Version: v5.04
Release: KEN
Release: 2002.11.28
Change File: Rset8139.c
Reason: Set the latency timer the same as the bios setting
################################################################################
Name: Rset8139.505
Version: v5.05
Release: KEN
Release: 2003.7.30
Change File: Rset8139.c
Reason: 1. After we ran RSET8139 and out the utility, system could not find the CD-ROM drive
for Asustek 1300.
2. Un-mask IRQ15 when exit this program
################################################################################
Name: Rset8139.506
Version: v5.06
Release: Edward
Release: 2005.8.01
Change File: Rset8139.c
Reason: modify the bug of tx/rx loopback test
################################################################################
Name: Rset8139.507
Version: v5.07
Release: Vika Yen
Release: 2005.12.20
Change File: Rset8139.c
93468139.ASM
Reason: Compatibility issue with ATi chipset(ATi 450)
################################################################################
Name: Rset8139.508
Version: v5.08
Release: Russel Wang
Release: 2007.7.3
Change File: Rset8139.c
Reason: Fixed problems:
1. The program can not be launched when EEPROM is not grogramed(PG).
################################################################################
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.