readme.txt Driver File Contents (ICH5R_ICH6R.zip)

************************************************************
************************************************************
*
*  Intel(R) Application Accelerator for Microsoft* 
*  Windows* XP*, Microsoft* Windows* 2000, and Microsoft*
*  Windows* Server 2003 Installation Readme.
*
*  This document makes references to products developed by
*  Intel. There are some restrictions on how these products
*  may be used, and what information may be disclosed to
*  others. Please read the Disclaimer section at the bottom
*  of this document, and contact your Intel field
*  representative if you would like more information.
*
************************************************************
************************************************************

************************************************************
*  Intel is making no claims of usability, efficacy or 
*  warranty. The INTEL SOFTWARE LICENSE AGREEMENT contained
*  herein completely defines the license and use of this 
*  software.
************************************************************


************************************************************
*  CONTENTS OF THIS DOCUMENT
************************************************************

This document contains the following sections:

1.  Overview
2.  System Requirements
3.  Language Support
4.  Determining the System Mode
5.  Installing the Software
6.  Verifying Installation of the Software
7.  Advanced Installation Instructions
8.  Identifying the Software Version Number
9.  Uninstalling the Software   

************************************************************
* 1.  OVERVIEW
************************************************************

The Intel(R) Application Accelerator is designed to provide 
functionality for the following Storage Controllers:

	- Intel(R) 6300ESB SATA RAID Controller
	- Intel(R) 82801FR SATA RAID Controller
	- Intel(R) 82801FR SATA AHCI Controller
	- Intel(R) 82801ER SATA RAID Controller


This product is available for use on systems using the
Intel(R) Pentium(R) 4 Processor with the following I/O 
Controller Hub:

	- Intel(R) 6300ESB I/O Controller Hub (ESB)
	- Intel(R) 82801FR I/O Controller Hub (ICH6R)
	- Intel(R) 82801ER I/O Controller Hub (ICH5R)

This product is supported on systems running on Microsoft 
Windows XP, Microsoft Windows 2000, or Microsoft Windows 
Server 2003 operating systems. Software installation is 
flexible and fully automated.


************************************************************
* 2.  SYSTEM REQUIREMENTS
************************************************************

1.  The system must contain an Intel(R) Pentium(R) 4 
    Processor and one of the following Intel products:
	 
	- Intel(R) 6300ESB I/O Controller Hub (ESB)
	- Intel(R) 82801FR I/O Controller Hub (ICH6R)
	- Intel(R) 82801ER I/O Controller Hub (ICH5R)

2.  The system must be running on one of the following
    Microsoft* operating systems:

        - Windows* XP Professional
	- windows XP Home Edition 
        - Windows 2000
	- Windows 2000 Advanced Server
	- Windows Server 2003

3.  The system should contain at least the minimum system 
    memory required by the operating system.

4.  The 'Intel(R) Chipset Software Installation Utility'
    must be installed prior to installing the Intel(R)
    Application Accelerator.



************************************************************
* 3.  LANGUAGE SUPPORT
************************************************************

Below is a list of the languages (and their abbreviations)
for which the Intel(R) Application Accelerator software has 
been localized. The language code is listed in parentheses 
after each language.

chs -> Chinese (Simplified) (0804)
cht -> Chinese (Traditional) (0404)
csy -> Czech (0005)
dan -> Danish (0006)
nld -> Dutch (0013)
enu -> English (United States) (0009)
fin -> Finnish (000B)
frc -> French (Canada) (0C0C)
fra -> French (Standard) (040C)
deu -> German (0007)
ell -> Greek (0008)
hun -> Hungarian (000E)
ita -> Italian (0010)
jpn -> Japanese (0011)
kor -> Korean (0012)
nor -> Norwegian (0014)
plk -> Polish (0015)
ptb -> Portuguese (Brazil) (0416)
ptg -> Portuguese (Standard) (0816)
rus -> Russian (0019)
esp -> Spanish (000A)
sve -> Swedish (001D)
tha -> Thai (001E)
trk -> Turkish (001F)


************************************************************
* 4.  DETERMINING THE SYSTEM MODE
************************************************************

To use this readme effectively, you will need to know what 
mode your system is in. The easiest way to determine the 
mode is to identify how the Serial ATA controller is 
presented within the Device Manager. The following 
procedure will guide you through determining the mode.

1.  Click 'Start'; select 'Settings', then 'Control Panel'
2.  Double-click on the 'System' applet. You may have to 
    select 'Switch to Classic View' first.
3.  Select the 'Hardware' tab.
4.  Select the 'Device Manager' button
5.  Look for an entry named 'SCSI and RAID Controllers'.
    If this entry is present, expand it and look for one of
    the following controllers:
    
    - 'Intel(R) 6300ESB SATA RAID Controller' 
    If this controller is present, the system is an ESB
    system in RAID mode and no further action is required.

    - 'Intel(R) 82801FR SATA RAID Controller' 
    If this controller is present, the system is an ICH6R
    system in RAID mode and no further action is required.

    - 'Intel(R) 82801ER SATA RAID Controller'    
    If this controller is present, the system is an ICH5R
    system in RAID mode and no further action is required.

    - If neither of the controllers above are shown, then
    the system is not running in RAID mode and you should 
    continue with step 6 below.

6.  Look for an entry named 'IDE ATA/ATAPI controllers'.
    If this entry is present, expand it and look for one of
    the following controllers:

    - 'Intel(R) 82801FR SATA AHCI Controller'
    If this controller is present, the system is an ICH6R
    system in AHCI mode and no further action is required.

    - If this controller is not present, then your system
    is not in AHCI mode. No other modes are supported by 
    the Intel(R) Application Accelerator software and you
    should continue with step 7 below.

7.  Your system does not appear to be running in RAID or 
    AHCI mode. If you feel that your system is running in 
    RAID or AHCI mode and you do not see any of the 
    controllers listed above, you may choose to contact 
    your system manufacturer or place of purchase for 
    assistance.


************************************************************
* 5.  INSTALLING THE SOFTWARE
************************************************************

5.1 General Installation Notes

1.  If you are installing the operating system on a system
    configured for RAID or AHCI mode, you must pre-install 
    the Intel(R) Application Accelerator driver using the 
    F6 installation method described in section 5.3.

2.  The 'Intel(R) Chipset Software Installation Utility' 
    must be installed on the system after a supported 
    Microsoft* Windows* operating system has been installed.

3.  To install the Intel(R) Application Accelerator, 
    double-click on the self-extracting and self-installing 
    setup file and answer all prompts presented.

4.  By default, all installed files (readme.txt, help, etc.) 
    are copied to the following path: 
    
    32-bit:	
    <bootdrive>\Program Files\Intel\Intel Application 
    Accelerator 
	
5.2 InstallShield* Installation from Hard Drive or CD-ROM
    
Note: This method is applicable to systems configured for 
      RAID or AHCI mode.

1.  Download the Intel(R) Application Accelerator setup file
    and double-click to self-extract and to begin the setup 
    process.

2.  The 'Welcome' window appears. Click on the Next button 
    to continue.

3.  The 'Uninstallation Warning' window appears. Click on 
    the Next button to continue.

4.  The 'Software License Agreement' window appears. If you 
    agree to these terms, click on the Yes button to 
    continue.

5.  The 'Choose Destination Location' window appears.
    Click on the Next button to continue.

6.  The 'Select Program Folder' window appears.  Click on 
    the Next button to continue installing the driver.

7.  If the InstallShield* Wizard Complete window is shown 
    without a prompt to restart the system, click the Finish
    button and proceed to step 8. If it is shown with a 
    prompt to restart the system, click 'Yes, I want to 
    restart my computer now.' (the default selection) and 
    click the Finish button.  Once the system has restarted,
    proceed to step 8.

8.  To verify that the driver was loaded correctly, refer 
    to Section 6.


5.3 Pre-Installation Using the F6 Method

Note: Steps 1 and 2 can be skipped if you use the appropriate
      F6 Floppy disk utility provided by Intel. This utility 
      can be downloaded from the following website. These 
      methods are applicable to systems configured for RAID 
      or AHCI mode.

http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=961	

1.  Extract all driver files from the installation package.
    See Section 7.2 for instructions on extracting the 
    files.

2.  Create a floppy containing the iaAhci.inf, iaAhci.cat,
    iaStor.inf, iaStor.sys, iaStor.cat and TxtSetup.oem 
    files in the root directory.

3.  At the beginning of the operating system setup, press F6
    to install a third party SCSI or RAID driver.

4.  When prompted, select 'S' to Specify Additional Device.

5.  When prompted, insert the floppy disk you created in
    step 2 and press Enter.

6.  At this point you should be presented with a selection
    for one of the following depending on you hardware
    version and configuration:
	
	- Intel(R) 6300ESB SATA RAID Controller
	- Intel(R) 82801ER SATA RAID Controller
	- Intel(R) 82801FR SATA RAID Controller
	- Intel(R) 82801FR SATA AHCI Controller

7.  Highlight the selection that is appropriate for the 
    hardware in your system and press Enter.

8.  Press Enter again to continue. Leave the floppy disk in 
    the system until the next reboot as the software will 
    need to be copied from the floppy disk again when setup
    is copying files.


************************************************************
* 6.  VERIFYING INSTALLATION OF THE SOFTWARE
************************************************************

6.1 Verifying Have Disk, F6, or Unattended Installation: 
    depending on your system configuration, refer to the 
    appropriate sub-topic below:


6.1a Systems Configured for RAID Mode:

1.  Click 'Start'; select 'Settings', then 'Control Panel'
2.  Double-click on the 'System' applet. You may have to 
    select 'Switch to Classic View' first.
3.  Select the 'Hardware' tab.
4.  Select the 'Device Manager' button
5.  Expand the 'SCSI and RAID Controllers' entry
6.  Right-click on 'Intel(R) 82801FR SATA RAID Controller'
    This same procedure can also be used for systems using 
    the 'Intel(R) 82801ER SATA RAID Controller' and
    the 'Intel(R) 6300ESB SATA RAID Controller'.
7.  Select 'Properties'
8.  Select the 'Driver' tab
9.  Select the 'Driver Details' button
10. If the 'iaStor.sys' file is displayed, then installation 
    was successful.


6.1b Systems Configured for AHCI Mode:

1.  Click 'Start'; select 'Settings', then 'Control Panel'
2.  Double-click on the 'System' applet. You may have to 
    select 'Switch to Classic View' first.
3.  Select the 'Hardware' tab.
4.  Select the 'Device Manager' button
5.  Expand the 'IDE ATA/ATAPI controllers' entry
6.  Right-click on 'Intel(R) 82801FR SATA AHCI Controller' 
6.  Right-click on the 'Intel(R) 82801FR SATA AHCI Controller' 
7.  Select 'Properties'
8.  Select the 'Driver' tab
9.  Select the 'Driver Details' button
10. If the 'iaStor.sys' file is displayed, then installation 
    was successful.


6.2 Verifying InstallShield* or 'Package for the Web' 
    Installations:

1.  Run 'Start'
2.  Find the 'Intel(R) Application Accelerator' 
    program group
3.  Select the 'Intel(R) Application Accelerator' entry
4.  The 'Intel(R) Storage Utility' application should launch
5.  If this application does not launch, the Intel 
    Application Accelerator driver was not installed 
    properly and setup needs to be run. 


************************************************************
* 7.  ADVANCED INSTALLATION INSTRUCTIONS
************************************************************

7.1 Available Setup Flags:

    -?             The installer presents a dialog showing
		   all the supported setup flags (seen here)
		   and their usage. 

    -S             Silent install (no user prompts)

    -B             Forces a system reboot after installation

    -P <path>      Supplies target path when using -A flag

    -A             Extracts all files (does not install 
                   driver) to <path> if -P is also 
                   supplied; otherwise, the files are
                   extracted to the default location

    -N             Installs all components except driver

    -NoGUI	   Installs only the driver; the Storage
		   Utility, Event Monitor, and Tray icon
                   applet are not installed.

    -NoMon	   Disables the Event Monitor which
                   consists of the Disk Monitor Service and
                   the System Tray Icon Applet.

    -NoCPL	   Disables the Control Panel Applet

    -O <name>      Allows for the customization of the 
                   program folder name for the Intel(R) 
                   Storage Utility, which will appear in 
                   the Start, Programs menu.
		
    -L<lang code>  Forces a particular language install (See 
		   Section 3 for a table mapping <lang code> 
                   to language).  There cannot be a space 
                   between -L and <lang code>

    -build         Displays build information

    -f2<path\name> Creates a log file in <existing path> 
                   with <name>; this is to be used during 
                   silent installation. There cannot be a 
                   space between -F2 and <path\name>, and 
                   the path must exist prior to installation

Notes:  Flags and their parameters are not case-sensitive.  
        Flags may be supplied in any order, with the 
	exception of the -S and -L, which must be 
	supplied last. When using the -A flag, a target 
        path may be specified via the -P flag, and the -O, 
        -L, -S, and -N flags are ignored. When using the -P 
        or -O flags, a space is required between the flag 
        and the argument; when using -L and -f2, however, 
        there should be no space.  When using the -f2 flag,
	a log file name and path must be specified, and the 
        path must exist prior to the installation.

7.2 Use one of the following command examples to extract the 
    driver files from the different package types:

	c:\iata_cd.exe -a -a -p c:\<path>
	c:\iata_enu.exe -a -a -p c:\<path>
	c:\setup.exe -a -p c:\<path>

    When run, the installation process begins; simply click
    through the dialogs as prompted. This will not install 
    the driver, it will only extract the driver files to 
    <path>. Once the extraction is completed, the 
    driver files can be found in <path>\Driver.

7.3 To install the RAID driver, as outlined in the Microsoft
    document 'Deployment Guide Automating Windows NT Setup', 
    use the supplied TXTSETUP.OEM file included in this 
    package and insert the lines shown in step 7.3a and 7.3b
    below into the UNATTEND.TXT file. This method is 
    available for Microsoft* Windows* XP, Windows 2000, and
    Windows Server 2003. Before you begin, iaAhci.inf, 
    iaAhci.cat, iaStor.inf, iaStor.cat, iaStor.sys, and 
    Txtsetup.oem files will need to be extracted from the 
    setup files. To extract these files, use the method 
    described in section 7.2 above.

7.3a Systems Configured for RAID Mode:

Note: This same procedure can be used for systems using the 
      'Intel(R) 82801ER SATA RAID Controller' and the
      'Intel(R) 6300ESB SATA RAID Controller'. Simply
      replace the text within the quotation marks.

    // Insert the lines below into the UNATTEND.TXT file
  
    [MassStorageDrivers]
    "Intel(R) 82801FR SATA RAID Controller" = OEM
 
    [OEMBootFiles]
    iaStor.inf
    iaStor.sys
    iaStor.cat
    Txtsetup.oem


7.3b Systems Configured for AHCI Mode:

    // Insert the lines below into the UNATTEND.TXT file

    [MassStorageDrivers]
    "Intel(R) 82801FR SATA AHCI Controller" = OEM
 
    [OEMBootFiles]
    iaAhci.inf
    iaStor.sys
    iaAhci.cat
    Txtsetup.oem


************************************************************
* 8.  IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************

8.1 Use the following steps to identify the software version 
    number following a Have Disk, F6, or unattended 
    installation.


8.1a Systems Configured for RAID Mode:

1.  Click 'Start'; select 'Settings', then 'Control Panel'
2.  Double-click on the 'System' applet. You may have to 
    select 'Switch to Classic View' first.
3.  Select the 'Hardware' tab.
4.  Select the 'Device Manager' button
5.  Expand the 'SCSI and RAID Controllers' entry
6.  Right-click on 'Intel(R) 82801FR SATA RAID Controller'
    This same procedure can also be used for systems using 
    the 'Intel(R) 82801ER SATA RAID Controller' and
    the 'Intel(R) 6300ESB SATA RAID Controller'. 
7.  Select 'Properties'
8.  Select the 'Driver' tab
9.  The software version should be displayed after
    'Driver Version:'


8.1b Systems Configured for AHCI Mode:

1.  Click 'Start'; select 'Settings', then 'Control Panel'
2.  Double-click on the 'System' applet. You may have to 
    select 'Switch to Classic View' first.
3.  Select the 'Hardware' tab.
4.  Select the 'Device Manager' button
5.  Expand the 'IDE ATA/ATAPI controllers' entry
6.  Right-click on 'Intel(R) 82801FR SATA AHCI Controller' 
7.  Select 'Properties'
8.  Select the 'Driver' tab
9.  The software version is displayed after
    'Driver Version:'


8.2 Identify the software version for InstallShield* or 
    'Package for the Web' Installations:

1.  Click 'Start'
2.  Find the 'Intel(R) Application Accelerator' program 
    group
3.  Select the 'Intel(R) Storage Utility' item
4.  The 'Intel(R) Storage Utility' application should be 
    shown, with the version shown in the splash screen. It 
    can also be viewed by selecting 'About' from within the 
    'Help' menu.


************************************************************
* 9.  UNINSTALLING THE SOFTWARE
************************************************************

Removal of this software from the system will render any 
Serial ATA hard drives inaccessible by the operating system;
therefore, uninstallation is not recommended. When the 
system is in RAID mode, it is recommended that any data on 
any RAID volumes be backed up and that the RAID volume be 
deleted before uninstalling this software. It is also 
recommended that the system be configured for IDE mode after 
uninstalling this software. Consult the user manual for this
version of Intel(R) Application Accelerator for details on 
how to do this.

Use the following procedure to uninstall the software:

1. Select 'Uninstall' from the following Start Menu folder:

   * Programs->Intel(R) Application Accelerator

2. The uninstall program will start. Click through the
   options for the uninstallation.
 

NOTE: This procedure assumes that the above installation
      process was successful. This uninstallation procedure
      is specific only to this version of the software and 
      the installation file included in this package.


************************************************************
* DISCLAIMER
************************************************************

Information in this document is provided in connection with
Intel products. Except as expressly stated in the INTEL
SOFTWARE LICENSE AGREEMENT contained herein, no license,
express or implied, by estoppel or otherwise, to any
intellectual property rights is granted by this document.
Except as provided in Intel's Terms and Conditions of Sale
for such products, Intel assumes no liability whatsoever,
and Intel disclaims any express or implied warranty,
relating to sale and/or use of Intel products, including
liability or warranties relating to fitness for a particular
purpose, merchantability or infringement of any patent,
copyright or other intellectual property right. Intel
products are not intended for use in medical, lifesaving,
or life sustaining applications.

************************************************************
* Intel Corporation disclaims all warranties and liabilities
* for the use of this document, the software and the
* information contained herein, and assumes no
* responsibility for any errors which may appear in this
* document or the software, nor does Intel make a commitment
* to update the information or software contained herein.
* Intel reserves the right to make changes to this document
* or software at any time, without notice.
************************************************************

* Third-party brands and names may be claimed as the 
  property of others.


************************************************************
* INTEL SOFTWARE LICENSE AGREEMENT
************************************************************

INTEL SOFTWARE LICENSE AGREEMENT (OEM / IHV / ISV Distribution & Single User)

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. 
Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software.

Please Also Note:
* If you are an Original Equipment Manufacturer (OEM), Independent Hardware Vendor (IHV), or Independent Software Vendor (ISV), this complete LICENSE AGREEMENT applies;
* If you are an End-User, then only Exhibit A, the INTEL SOFTWARE LICENSE AGREEMENT, applies.

For OEMs, IHVs, and ISVs:

LICENSE. This Software is licensed for use only in conjunction with Intel component products.  Use of the Software in conjunction with non-Intel component products is not licensed hereunder. Subject to the terms of this Agreement, Intel grants to you a nonexclusive, nontransferable, worldwide, fully paid-up license under Intel's copyrights to:
	a) use, modify and copy Software internally for your own development and maintenance purposes; and
	b) modify, copy and distribute Software, including derivative works of the Software, to your end-users, but only under a license agreement with terms at least as restrictive as those contained in Intel's Final, Single User License Agreement, attached as Exhibit A; and
	c) modify, copy and distribute the end-user documentation which may accompany the Software, but only in association with the Software.

If you are not the final manufacturer or vendor of a computer system or software program incorporating the Software, then you may transfer a copy of the Software, including derivative works of the Software (and related end-user documentation) to your recipient for use in accordance with the terms of this Agreement, provided such recipient agrees to be fully bound by the terms hereof.  You shall not otherwise assign, sublicense, lease, or in any other way transfer or disclose Software to any third party. You shall not reverse- compile, disassemble or otherwise reverse-engineer the Software.

Except as expressly stated in this Agreement, no license or right is granted to you directly or by implication, inducement, estoppel or otherwise.  Intel shall have the right to inspect or have an independent auditor inspect your relevant records to verify your compliance with the terms and conditions of this Agreement.

CONFIDENTIALITY. If you wish to have a third party consultant or subcontractor ("Contractor") perform work on your behalf which involves access to or use of Software, you shall obtain a written confidentiality agreement from the Contractor which contains terms and obligations with respect to access to or use of Software no less restrictive than those set forth in this Agreement and excluding any distribution rights, and use for any other purpose.
Otherwise, you shall not disclose the terms or existence of this Agreement or use Intel's name in any publications, advertisements, or other announcements without Intel's prior written consent.  You do not have any rights to use any Intel trademarks or logos.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time and without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of ninety (90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE.  Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. 

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel.
 
APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052.


EXHIBIT "A" 
INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User)

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. 
Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software.

LICENSE. You may copy the Software onto a single computer for your personal, noncommercial use, and you may make one back-up copy of the Software, subject to these conditions: 
1. This Software is licensed for use only in conjunction with Intel component products.  Use of the Software in conjunction with non-Intel component products is not licensed hereunder. 
2. You may not copy, modify, rent, sell, distribute or transfer any part of the Software except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software.
3. You may not reverse engineer, decompile, or disassemble the Software. 
4. You may not sublicense or permit simultaneous use of the Software by more than one user.
5. The Software may contain the software or other property of third party suppliers, some of which may be identified in, and licensed in accordance with, any enclosed "license.txt" file or other text or file. 

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of ninety (90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE.  Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software.

LIMITATION OF LIABILITY.  IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. 

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel.
 
APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052.
 
SLAOEMISV1/RBK/01-21-00

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.39