Installing Driver in Existing Windows 2000 System
WARNING: If you will be moving the boot drive containing the existing Windows 2000 operating
system to a mirrored RAID 1 array on the FastTrak 376 , the FastTrak 376 driver MUST be loaded
to the hard drive while it is still attached to your existing hard drive controller.
Do not attach this drive or any other hard drive to the FastTrak 376 controller before completing
this step.
After installing the FastTrak 376 and rebooting your system, Windows 2000 setup will show a
"New Hardware Found" dialog box. Under Windows 2000, the "PCI RAID Controller" will be displayed.
1. In the dialog box, choose "Driver from disk provided by hardware manufacturer" button.
2. In the CD-ROM Drive, insert the FastTrak 376 driver.
3. Type "CD-ROM Drive:\Drivers\Promise\WIN2000\" in the text box. Press "Enter".
4. Choose "Win2000 Promise FastTrak 376 (tm) Controller" from the list that appears on screen,
then press the "Enter" key.
5. The Windows 2000 Setup screen will appear again saying
"Setup will load support for the following mass storage devices
-Win2000 Promise FastTrak 376 (tm) controller". The FastTrak 376 driver
will now be copied on to the system and entered into the Windows 2000 driver database.
6. When the "System Settings Change" dialog box appears, remove the floppy diskette and click
on "Yes" to restart the system. Windows 2000 will then restart for the driver installation
to take effect.
7. Power off your system, then attach your hard drives to the FastTrak 376 controller.
Installing Driver During New Windows 2000 Installation
1a. Floppy Install: Boot the computer with the Windows 2000 installation diskettes.
1b. Floppyless Install: Boot from floppy and type "WIN2000". After files have been copied,
the system will reboot. On the reboot, press <F6> after the message
"Setup is inspecting your computer's hardware configuration..." appears.
1c. CD-ROM Install: Boot from the CD-ROM. Press <F6> after the message
"Press F6 if you need to install third party SCSI or RAID driver" appears.
2. When the "Windows 2000 Setup" window is generated, press "S" to Specify an Additional
Device(s)
3. Press "O" to select "Other" and press the "Enter" key.
4. Insert the Promise Technology driver into the CD-ROM Drive: and press "Enter" key.
5. Choose "Win2000 Promise FastTrak 376 (tm) Controller" from the list that appears on screen,
then press the "Enter" key.
6. The Windows 2000 Setup screen will appear again saying
"Setup will load support for the following mass storage devices:"
The list will include "Win2000 Promise FastTrak 376 (tm) controller"..
NOTE: If you need to specify any additional devices to be installed, do so at this time.
Once all devices are specified, continue to step 7.
7. From the Windows 2000 Setup screen, press the Enter key. Setup will now load all device
files and then continue the Windows 2000 installation.
Confirming Windows 2000 Installation
1. From Windows 2000, open the Control Panel from "My Computer" followed by the System icon.
2. Choose the "Hardware" tab, then click the "Device Manager" tab.
3. Click the "+" in front of "SCSI & RAID Controllers hardware type."
The driver "Win2000 Promise FastTrak 376 (tm) Controller" should appear.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.