README.TXT Driver File Contents (rs_rz_fw.exe)

ICP Controller Firmware Upgrade Kit
===================================

You will need:
One DOS bootable formatted 3.5", 1.44BM floppy disk
One formatted 3.5", 1.44MB floppy disk


Copy the following files to the 1.44MB DOS floppy disk:
   GDTX000.EXE    
   ICPCON.EXE
   GDT_RPFW.???   the firmware file (??? = version of the firmware)

1) Boot the system to MS-DOS 

2) Remove the bootable disk and place the disk containing the ICP files in 
   the floppy drive.

3) Load the MS-DOS driver (GDTX000 "Enter")

4) Start ICPCON, select the Controller, change with "F4" to the
   "Advanced Setup", select "Configure Controller" and then "Firmware Update"
   type the drive letter where the update disk is located (e.g. a:)

5) Select the path of the new firmware library GDT_RPFW.* or simply enter
   "." for the current directory. Select the firmware file by
    pressing Enter and follow the instructions of ICPCON.

*** DO NOT TURN OFF POWER OR RESET THE SYSTEM DURING FW UPDATE !!! ***
*** DO NOT REMOVE THE FLOPPY DISK ***

6) After the firmware update is completed you will be returned to the
   Configure Controller menue.
   Press "Esc" three times to exit. Press "Y" to quit.
   A message appears informing you that a firmware update has been detected.
   Remove the floppy disk and press "Enter" to reboot the system.

7) The operating system drivers and tools should be updated as well.


For technical help please contact our technical support:

United States:
Telefon: +01-480-552-1422
E-mail:  icp.us.support@intel.com
      
EUROPE:
Telefon: +49-7132-9620-900
E-mail:  icp.support@intel.com


*** end of file ***
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.42