[comm] SmallI2C=0 [Setup] DefDir=C:\ONFLASH Company=OnSpec Product=Firmware Flashing Utility Caption=Firmware Flashing Utility Group=Firmware Flashing Utility [Firmware] ; This is where you would list the vendor specific firmware files. ; For DataFab, you can make use of the unused entries to list files ; You MUST modify ONDEV9X & 2K.INI to change the Driver Name (ImUSB, OnUSB, DfUSB) ; also... FILE1=ZERO.BIN FILE2=DMCFB010.BIN FILE3=DMSDB011.BIN FILE4=DMMSB010.BIN FILE5=DMSMN011.BIN FILE6= FILE7= FILE8= [Firmware Options] SaveCurrentFile=No AutoVerify=Yes [Board Test] ; Depending on the customer the RHS file names might change so the WISE ; Installer will pick up the changed name and copy them back as TEST.OBJ ; and TEST.FIX respectively... TEST.OBJ=TEST.OBJ TEST.FIX=TEST.FIX ENABLE.OBJ=ENABLEDF.OBJ ENABLE.FIX=ENABLEDF.FIX [GUI] ; Right now the number of buttons supported is 2,3 & 4. Product=USB TEXT=This utility configures the USB bridge to Mini-Flash NoOfButtons=1 Test= TestEnable= [Button1Details] ; For File names please always use comma (,) at the end of each file name NAME=Factory Default TEXT=Select this button to make the USB device blank. FILES=Zero.BIN [DMediaDetails] NAME=FLASH Mini-Flash TEXT=Select this button to configure the USB bridge to Digital Media like CompactFlash, SmartMedia, MMC/SD and MemoryStick. ;For Default Firmware 0 is Bulk and 1 is NonBulk DefaultFW=0 ;For Default EEPROM 0 is Small and 1 is Large DefaultEE=1 [DMedia1Details] NAME=FLASH CF TEXT=Select this button to configure the USB bridge to CompactFlash. BULKFILES=DMCFB010.BIN, NONBULKFILES= [DMedia2Details] NAME=FLASH MMC/SD TEXT=Select this button to configure the USB bridge to MMC/SD. BULKFILES=DMSDB011.BIN, NONBULKFILES= [DMedia3Details] NAME=FLASH MS TEXT=Select this button to configure the USB bridge to MemoryStick. BULKFILES=DMMSB010.BIN, NONBULKFILES= [DMedia4Details] NAME=FLASH SM TEXT=Select this button to configure the USB bridge to SmartMedia. BULKFILES= NONBULKFILES=DMSMN011.BIN,Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.