;/* ;******************************************************************** ;******************************************************************** ;******************************************************************** ;*** Copyright (c) 1997 *** ;*** Rockwell Semiconductor Systems *** ;*** Multimedia Communications Division *** ;*** All Rights Reserved *** ;*** *** ;*** CONFIDENTIAL -- No Dissemination or *** ;*** use without prior written permission. *** ;*** *** ;******************************************************************** ;******************************************************************** ; ;******************************************************************************* ;******************************************************************************* ;******************************************************************************* ; IMPORTANT OEM INFORMATION ; ; 1. OEMs wishing to change the Product Id should go to the bottom of this file ; and edit the string OEMPID. ; ; 2. OEMs wishing to change the support options for Hardware 3D (Analog 3D) ; should go to the [RSS5002.AddReg] section of this file and uncomment ; the appropriate add registry line for the Hardware3D symbol. ; ; 3. OEMs wishing to change the Uninstall string that appears in "Add/Remove" ; programs, in the control panel, should go down and edit the string "UninstallName." ; ; 4. OEMs wishing to change mixer panel labels should consult the document "Flexmix.Doc" ; found with the installation diskette and make appropriate changes ; in the [RSS5002.ADDREG] section below. ; ; 5. OEMs should indicate whether the CD-Rom IDE port is available by commenting ; out the appropriate section under [RSS5004_Device]. ;******************************************************************************* ;******************************************************************************* ;******************************************************************************* ; ; MODULE NAME: rwa95.inf ; ; AUTHOR: K.R. Snyder ; ; ; HISTORY: Major Revision Date By ; ----------------------------- -------- ----- ; Created from various samples 01/04/96 KRS ; Added Joystick 01/19/96 KRS ; Modified Device Ids for new Res. Data 03/01/96 KRS ; Modified ROK to RSS, stubbed CDROM 03/13/96 KRS ; Remove MSMPU401 drivers 07/23/96 KRS ; Add SetWaPnp Stuff 09/24/96 KRS ; Add hooks for WaveStream 09/24/96 KRS ; DOS Mode Stuff 09/27/96 KRS ; RWAUTO.EXE for dos mode set blaster 10/02/96 KRS ; Changes for MIDI Mapper WS Device 10/16/96 KRS ; Changes for PnPId in System Ini 11/07/96 KRS ; Added Hardware3D mechanism 01/03/97 KRS ; Added Uninstall Mechanism 01/16/97 KRS ; ; ; DESCRIPTION: ; ; This module is the .INF file for Windows 95 installation of ; Rockwell WaveArtist ; ; ; NOTES: Beware. ;****************************************************************** ;****************************************************************** ;****************************************************************** ;*/ [Version] Signature="$CHICAGO$" Class=MEDIA provider=%RSSMfgName% LayoutFile=Layout.inf [Manufacturer] %RSSMfgName%=Rockwell [Rockwell] %*RSS5000.DeviceDesc%=RSS5000_Device, *RSS5000 %*RSS5001.DeviceDesc%=RSS5001_Device, *RSS5001 %*RSS5002.DeviceDesc%=RSS5002_Device, *RSS5002 %*RSS5004.DeviceDesc%=RSS5004_Device, *RSS5004 %*RSS5003.DeviceDesc%=RSS5003_Device, *RSS5003 %*RSS5005.DeviceDesc%=RSS5005_Device, *RSS5005 %*RSS5006.DeviceDesc%=RSS5006_Device, *RSS5006 [PreCopySection] HKR,,NoSetupUI,,1 [ClassInstall] AddReg=Class.AddReg [Class.AddReg] HKR,,,,%MediaClassName% HKR,,Icon,,"-1" HKR,,Installer,,mmci.dll ;;; Install Section for WaveArtist PnP Logical Device 0 ;;; which is the Command/Status Interface [RSS5000_Device] CopyFiles=RSS5000.CopyList AddReg=RSS5000.AddReg UpdateIniFields=Drivers.fields ;;; Install Section for WaveArtist PnP Logical Device 1 ;;; which is the SB Pro Emulation I/F. [RSS5001_Device] CopyFiles=RSS5001.CopyList Addreg=RSS5001.AddReg UpdateIniFields=Drivers.fields ;MPU-401 Emulation device (logical device 2) AND Master Node ;With Ring 3 Driver [RSS5002_Device] CopyFiles=RSS5002.CopyList, WSTREAM.CopyList, MARGE2.CopyList AddReg=WAVE.AddReg, MIXER.AddReg, RSS5002.AddReg UpdateInis=PnPId.Section UpdateIniFields=Drivers.fields UpdateAutoBat=SetwaPnp.Section [PnPId.Section] RWA95DOS.INI,Rwa.Drv,,"PnPId=%OEMPID%" ;Analog 3D -- device #4 [RSS5006_Device] ;Disabled CDROM Logical device #4 [RSS5003_Device] ;Disabled Modem Logical device #3 [RSS5005_Device] ;Game Port: Logical device #5 [RSS5004_Device] AddReg=RSS5004.AddReg UpdateInis=RSS5004.UpdateInis ;################################################################## ;# OEM Selectable CD-Rom Option ;################################################################## ; ;CHOOSE ONLY ONE OF THE FOLLOWING SECTIONS ; ;If the CD-Rom IDE port is available, use the ;SECOND SECTION and comment out the FIRST SECTION. ; ;If the CD-Rom IDE port is available, use the ;FIRST SECTION and comment out the SECOND SECTION ; ;!!!!!!! < FIRST SECTION > CD-Rom not in use CopyFiles=RSS5004.CopyList ;!!!!!!! < SECOND SECTION > CD-Rom in use ;CopyFiles=RSS5004.CopyList, RWAPNP.CopyList, @rwacpl95.cpl ;UpdateCfgSys=RWAPNP.Section ;Reboot ;################################################################## ;################################################################## [RSS5000.CopyList] rwa95vxd.vxd,,,2 ;rwa95drv.drv,,,2 [RSS5002.CopyList] rwa95vxd.vxd,,,2 rwa95drv.drv,,,2 rwawsdrv.drv,,,2 msopl.drv,,, rwados95.exe,,,2 setwapnp.exe,,,2 rwautoex.exe,,,2 rwamixer.exe,,,2 rwaunin.exe,,,2 ctl3dv2.dll,,,2 [RSS5001.CopyList] rwa95vxd.vxd,,,2 ;rwa95drv.drv,,,2 [RSS5004.CopyList] vjoyd.vxd,,, msjstick.drv,,, [WSTREAM.CopyList] wstream.dll,, msgloop.exe,, vwstream.vxd,, [MARGE2.CopyList] marge2.lst,, hall.mal,, clear32.mal,, chorus.mal,, c2hall2b.mal,, [RWAPNP.CopyList] rwapnp.sys rwacpl95.cpl,,,2 [RWAPNP.Section] DevAddDev=RWAPNP.SYS,device,,"/IO 170 /IO2 360 /IRQ 15" [DestinationDirs] MARGE2.CopyList=10,media RWAPNP.CopyList=30 DefaultDestDir=11 ;run utility to edit autoexec and dosstart.bat to run setwapnp ;at right time so we can "restart in MS-DOS Mode" without losing ;PnP settings [SetwaPnp.Section] CmdDel=RWADOS95 CmdDel=SETWAPNP CmdAdd=RWADOS95 CmdAdd=SETWAPNP," /CLR" [Drivers.fields] system.ini,boot,drivers,msmixmgr.dll system.ini,boot,drivers,mmmixer.dll [RSS5004.UpdateInis] system.ini,drivers,"joystick=" [RSS5000.AddReg] HKR,,Driver,,rwa95vxd.vxd HKR,,DevLoader,,mmdevldr.vxd HKR,Drivers,MIGRATED,,0 [RSS5002.AddReg] HKR,,Driver,,"rwa95vxd.vxd vwstream.vxd" HKR,,DevLoader,,mmdevldr.vxd HKR,Drivers,MIGRATED,,0 HKR,Drivers\wave\rwa95drv.drv,Driver,,rwa95drv.drv HKR,Drivers\aux\rwa95drv.drv,Driver,,rwa95drv.drv HKR,Drivers\mixer\rwa95drv.drv,Driver,,rwa95drv.drv HKR,Drivers\midi\msopl.drv,Driver,,msopl.drv HKR,Drivers\midi\msopl.drv,Description,,%WAFM.DeviceDesc% HKR,Drivers\midi\rwa95drv.drv,Driver,,rwa95drv.drv HKR,Drivers\midi\rwa95drv.drv,Description,,%WAMPU.DeviceDesc% HKR,Drivers\midi\rwa95drv.drv,External,1,01,00,00,00 HKR,Drivers\midi\rwa95ws,Driver,,rwawsdrv.drv HKR,Drivers\midi\rwa95ws,Description,,%WSTREAM.DeviceDesc% HKR,,EnumPropPages,,"rwa95drv.drv,DrvEnumPropPages" HKR,Drivers,SubClasses,,"wave,midi,aux,mixer" ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;; OEM Selectable Flex Mixer Options ;;; ;;; See document FlexMix.Doc ;;; HKR,Config,NameAux1,,CD HKR,Config,NameAux2In,,"" HKR,Config,NameAux2Out,,waveblaster HKR,Config,NameMonoOut,,"" HKR,Config,NameLineIn,,Line HKR,Config,OptMasterMax,1,FF HKR,Config,OptAnalogFX,1,0 HKR,Config,OptStereoMic,1,0 HKR,Config,OptTreBass,1,0 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;; OEM Selectable Hardware 3D Option ;;; ;;; NOTE: The entry OptHardware3D (below) should be edited to match the OEMs hardware. ;;; The "0" option (default) indicates no external hardware 3D circuitry has been ;;; added by the OEM. The "1" option, indicates that the base address of the first ;;; IO Address range for WaveArtist logical device #3 (IDE) should be used as a ;;; write only location in Bit 7, to enable/disable the OEM added 3D circuitry. ;;; The "2" option indicates that the 2nd IO address range of this logical device ;;; should be used as the (bit 7) output 3D enable port. ;;; Note that for systems which support both a WaveArtist IDE and the 3D, that "2" ;;; option should be used because it is not used in normal IDE operation. ;;; ;;; In other words: First Line Below is for no external 3d and no IDE. ;;; Second Line Below is for external 3d. ;;; Third Line Below is for external 3d + IDE. ;;; ;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;----------------------Uncomment one and only one of the following 3 lines! ---------- HKR,Config,OptHardware3D,1,00 ;HKR,Config,OptHardware3D,1,01 ;HKR,Config,OptHardware3D,1,02 ;----------------------Uncomment one and only one of the previous 3 lines! ----------- ;uninstaller installation HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\WaveArtist,DisplayName,,"%UninstallName%" HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\WaveArtist,UninstallString,,"rwaunin.exe" [RSS5001.AddReg] HKR,,Driver,,rwa95vxd.vxd HKR,,DevLoader,,mmdevldr.vxd HKR,Drivers,MIGRATED,,0 [MIXER.AddReg] HKLM,Software\Microsoft\Windows\CurrentVersion\Run,SystemTray,,"SysTray.Exe" HKLM,%KEY_IOC%\Vol,,, [WAVE.AddReg] HKR,,DevLoader,,mmdevldr.vxd HKR,Drivers,MIGRATED,,0 HKR,Drivers\midi,,, HKR,Drivers\wave,,, HKR,Drivers\mixer,,, HKR,Drivers\aux,,, HKLM,%KEY_IOC%\acm,,, HKLM,%KEY_IOC%\Rec,,, HKLM,%KEY_IOC%\MPlay,,, [RSS5004.AddReg] HKR,,DevLoader,,mmdevldr.vxd HKR,Drivers,MIGRATED,,0 HKR,Drivers\joystick,,, HKR,,Driver,,vjoyd.vxd HKR,Drivers\joystick\msjstick.drv,Description,,%* RSS5004.DeviceDesc% HKR,Drivers\joystick\msjstick.drv,Driver,,msjstick.drv HKR,Drivers,SubClasses,,"joystick" [SourceDisksNames] 1=%DName%,RWA95,0000-0000 ; Our disky, label "RWA95", default serial num [SourceDisksFiles] ; Files found on which disks (for now include ms files) rwa95vxd.vxd=1 ; our VXD rwa95drv.drv=1 ; our Ring 3 driver [DestinationDirs] DefaultDestDir = 11 ; LDID_SYS ;---------------------------------------------------------------; [Strings] ;Non-localized strings ;KEY_WARNVER="SYSTEM\CurrentControlSet\Control\SessionManager\WarnVerDLLs" ;KEY_CHKVER="SYSTEM\CurrentControlSet\Control\SessionManager\CheckVerDLLs" KEY_IOC="SYSTEM\CurrentControlSet\Control\MediaResources\InstallOptionalComponents" ;Localized strings RSSMfgName=Rockwell MfgName="Microsoft" *RSS5000.DeviceDesc="WaveArtist Enhanced Mixer Command/Status I/F" *RSS5001.DeviceDesc="WaveArtist Adlib, Sound Blaster Interface" *RSS5002.DeviceDesc="Master Control Node and MIDI Port for WaveArtist" *RSS5003.DeviceDesc="WaveArtist Unused (CD-ROM)" *RSS5005.DeviceDesc="WaveArtist Unused (Modem)" *RSS5004.DeviceDesc="WaveArtist Joystick/GamePort" *RSS5006.DeviceDesc="WaveArtist Hardware Analog 3D Port" WAFM.DeviceDesc="WaveArtist FM Synthesizer" WAMPU.DeviceDesc="WaveArtist MPU-401" WSTREAM.DeviceDesc="WaveStream Music Synthesizer" Joystick.DeviceDesc="WaveArtist Gameport Joystick" MediaClassName="Sound, video and game controllers" DName="WaveArtist Installation Diskette" ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;; OEM --- The OEM may edit the following string to select what ;;; shows up on the "Uninstall" list in the control panel ;;; UninstallName="WaveArtist Audio Device Drivers" ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;; OEM Selectable Product Id ;;; ;;; NOTE: The string OEMPID (below) should be edited to ;;; match the Product Id in the PnP Resource Data. For example, ;;; OEMPID = "XXX0000" could be entered for a product XXX0000 where ;;; XXX is the 3 character vendor ID, and 0000 is the arbitrarty ;;; product number. ;;; ;;; Several choices are given below mirroring the resource data ;;; files shipped with the distribution disk -- or the OEM ;;; can enter one to match his product Id in his resource data. ;;; Only one definition should be included per installation. ;;; ;;; Note: "3D" refers to OEM added Hardware 3D circuitry attached ;;; to the primary base IDE address in place of a CD-ROM. For ;;; OEM added HW 3D attached to the secondary address, the "AC" ;;; or "AMC" files should be programmed into the EEROM. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;RSS5500 -- WA16AMC.TXT -- 16bit decode, Audio+Modem+CD (Got Everything Variation) ;RSS5400 -- WA16AC.TXT -- 16bit decode, Audio+CD (No Modem) ;RSS5100 -- WA16AM.TXT -- 16bit decode, Audio+Modem (No CD) ;RSS5000 -- WA16A.TXT -- 16bit decode, Audio (No CD, No Modem) ;RSS5B00 -- WA16AS.TXT -- 16bit decode, Audio,3D (No CD, No Modem) ;RSS5A00 -- WA16AMS.TXT -- 16bit decode, Audio+Modem+3D (No CD) ; ;RSS5700 -- WA10AMC.TXT -- 10bit decode, Audio+Modem+CD ;RSS5600 -- WA10AC.TXT -- 10bit decode, Audio+CD (No Modem) ;RSS5200 -- WA10AM.TXT -- 10bit decode, Audio+Modem (No CD) ;RSS5300 -- WA10A.TXT -- 10bit decode, Audio (No CD, No Modem) ;RSS5900 -- WA10AS.TXT -- 10bit decode, Audio,3D (No CD, No Modem) ;RSS5800 -- WA10AMS.TXT -- 10bit decode, Audio+Modem+3D (No CD) ; ;----------------------The next line is the one to edit! --------------------- OEMPID = "RSS5000" ;----------------------The previous line is the one to edit! --------------------- ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.