W940S5.DST Ver 1.00
Winbond Electronics Corporation
01/30/97
Description:
1. W940S5.DST is a SCO UNIX 5.x NDSP(Network Driver Software Package).
This driver is allowed to install on 4 LAN cards with Winbond 940 chips.
This driver will automatically get IOBASE and IRQ of 940 chips from PCI
Configuration Space.
If there are more 940 cards than the installed board number, this driver
will automatically select 940 cards to load.
If the installed board number is more than the 940 card number, this
driver will show warning messaage, and exits.
Installation:
1. login as root user (on maintenance mode).
2. use "custom" utility to install the 940 SCO 5.x software package.
2.1 doscp a:/<path>/w940s5.dst /tmp/VOL.000.000.
2.2 execute "custom" utility,
2.3 select "Software" item in the "Software Manager (custom) on
hostname" window to get into pull down menu,
move to "Install New...", then press [Enter] buttom,
2.4 |------------ Begin Installation on hostname -----------|
| |
| What host (machine) do youwant to install from? |
| --------------------------------------------------- |
| | <*> From hostname | |
| | < > Fraom another host | |
| --------------------------------------------------- |
| |
|-------------------------------------------------------|
| [Continue] [Cancel] [Help] |
|-------------------------------------------------------|
select from hostname and press [Continue] buttom,
2.5 |--------------------------- Select Media ---------------------------|
| |
| Insert media, and select media device. |
| |
||---------------------------------------------------------| |
||Media Device:|| Floppy Disk Driver 0 __________________|v| |
||---------------------------------------------------------| |
| ||------------------------------------------| |
| || *Floppy Disk Driver 0 | | |
| -------------|| SCSI CD-ROM Driver 0 | |---------|
| [Continue] || Media Images | | [Help] |
|--------------------------------------------------------------------|
press [] to get into pull down menu, select "Media Images" and
press [Continue] buttom,
2.6 |---------------------- Enter Image Directory -------------------------|
| |
|Enter the full path to the directory containing media images. |
| |
|Image Directory: | /tmp_______________________________________________|
| |
|Note: media images must follow the naming convention VOL.000.000, etc.|
|----------------------------------------------------------------------|
|[OK] [Cancel] [Help]|
|----------------------------------------------------------------------|
input the path name where VOL.000.000 is located,
and press [OK] buttom,
2.7 |---------------------- Enter Image Directory -----------------------|
| |
| Installing: Winbond W89C940 Ethernet Network Driver (version 1.0.0)|
| Do you want a FULL or PARTIAL installation? |
| |
|--------------------------------------------------------------------|
|[FULL] [Partial] [Cancel] [Help] |
|--------------------------------------------------------------------|
press [FULL] buttom, and wait for the following message is displayed:
|----------- Question ------------|
| Installation Complete |
|---------------------------------|
| [OK] |
|---------------------------------|
2.8 press [Enter] buttom then you will find out that
"Winbond W89C940 Ethernet Network Driver (version 1.0.0)"
is added to the package list.
3. use "netconfig" utility to install the driver.
3.1 select "Hardware" item from the "Network Configuration Manager" window
to get into pull down menu, move to "Add new LAN adapter",
then press [Enter] buttom,
3.2 |------------------------ Add new LAN adapter -----------------------|
| Select network adapter to be added: |
| ------------------------------------------------------------------ |
| |* 3COM EtherLink 16/16TP Adapter | |
| | . | |
| | . | |
| | . | |
| | . | |
| | . | |
| | . | |
| | . | |
| | Winbond W89C940 PCI Network Adapter | |
| -----------------------------------------------------------------| |
|--------------------------------------------------------------------|
| [Continue] [Cancel] [Help] |
|--------------------------------------------------------------------|
use [] key to move to "Winbond W89C940 PCI Network Adapter"
and then press [Continue] buttom,
3.3 |-------------------- Network Driver Configuration ------------------|
| |
| Enter the configuration of Winbond W89C940 PCI Network Adapter: |
| |
| ------------------------------------ |
| Device#: | | 0 __________________|v| |
| ------------------------------------ |
|--------------------------------------------------------------------|
| [Continue] [Cancel] [Help] |
|--------------------------------------------------------------------|
you can set the Device# to select some specified 940 board. if you do
not make sure this value, you do not change the value, continue the
installation, this driver will search PCI Ethernet card automatically.
when you finish the setting, press [Continue] buttom,
3.4 |---------------------------- Information ---------------------------|
| |
| Please verify adapter is set to the configuration just entered. |
|--------------------------------------------------------------------|
| [OK] |
|--------------------------------------------------------------------|
press [Enter] buttom,
3.5 |--------------------------- Add protocol -------------------------- |
| Select one networking product to be added to |
| ------------------------------------------------------------------ |
| | HW Winbond W89C940 PCI Network Adapter | |
| | * - SCO IPX/SPX | |
| | - SCO TCP/IP | |
| ------------------------------------------------------------------ |
|--------------------------------------------------------------------|
| [Add] [Cancel] [Help] |
|--------------------------------------------------------------------|
use [] key to move cursor to "SCO TCP/IP" then press [Add] buttom,
3.6 |-------------------- SCO TCP/IP Configuration ----------------------|
| |
| |
| |
| Local Host Name: | hostname_______________| [ Advanced ] |
| IP Address: | 10.2.22.142____________| Options... |
| Netmask: | 255.0.0.0______________| |
| Broadcast Address: | 10.255.255.255_________| |
| Domain Name: | hostname.com___________| |
| TCP connections: | 256 ___________________| |
| Pseudo ttys: | 32_____________________| |
| |
|--------------------------------------------------------------------|
| [OK] [Cancel] [Help] |
|--------------------------------------------------------------------|
input the related information then press [OK] buttom,
3.7 |------------------------------ Message -----------------------------|
| The following products were successfully configured into the system|
| SCO TCP/IP | |
| Winbond W89C940 PCI Ethernet Adapter - Deivce #0 |
|--------------------------------------------------------------------|
| [ OK] [Help] |
|--------------------------------------------------------------------|
press [OK] buttom,
3.8 at "Hardware" item press [Enter] buttom to get into pull down menu
then move to "Exit" then press [Enter] buttom,
3.9 |--------------------------- Question ---------------------------|
| The Unix Kernel must be re-linked before the changed |
| ??? made here will have an effect. |
| Do you want to re-link the kernel now? |
|----------------------------------------------------------------|
| [ YES ] [Help] |
|----------------------------------------------------------------|
press [YES] buttom to relink to kernel,
3.10 Do you want this kernel to boot by default (y/n) y
3.11 Do you want to the kernel environment rebuilt (y/n) y
4. reboot this UNIX system.
#shutdown -y -g0
Use:
1. login as root user (on maintenance mode).
2. use "netconfig" utility to reconfigure the driver.
|--------------------- Network Configuration Manager --------------------|
| ---------------------------------------------------------------------- |
| | Hardware Protocol | |
| ---------------------------------------------------------------------- |
| Current networking configuration: |
| -----------------------------------------------------------------------|
| ---------------------------------------------------------------------- |
| | * HW SCO TCP/IP Loopback driver | |
| | SCO TCP/IP | |
| | - SCO NFS Runtime System | |
| | HW Winbond W89C940 PCI Network Adapter - Device #0 | |
| | SCO TCP/IP | |
| | - SCO NFS Runtime System | |
| | | |
| | | |
| | | |
| ---------------------------------------------------------------------- |
| Current configuration of the networking software in this system |
|------------------------------------------------------------------------|
use [TAB] key to select "HW Winbond W89C940 PCI Network Adapter - Device #0",
then select "Hardware" item to get into pull down menu, move to
"Modify hardware configuration", then press [Enter] buttom,
following above installation steps 3.3, 3,4, 3.7-3.11 to reconfigure
this driver.
3. reboot this UNIX system.
#shutdown -y -g0
Trouble Shooting
1. Message: '%w940s: - - - ADAPTER NOT FOUND'
Solution: Make sure the 940 card is plugged into your system.
2. Message: '%w940s: - - - REAL BOARD NUMBER<INSTALLED BOARD NUMBER'
Solution: Plug the sufficient 940 cards into your system.
Histories of Release:
***) 1.00, 01-30-1997
First release.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.