Linksys, A Division of Cisco Systems, Inc. Product: WAP54G v3 (European) Classification: Firmware Release History (European version) Release Date: January 26, 2006 Firmware version: 3.05.03 This firmware is backwards compatible with older versions of the hardware. ______________________________________________________________________________ Version 3.05.03 - Fixed the "restore" bug where the wireless settings (SSID, security settings) were not restored from the config file properly. Version 3.02 (initial release for ver. 3 hardware) - Adds SES support, compatible with older versions of hardware Version 2.08 May 13, 2004 ETSI - Fixed problems with firmware not reporting IP properly to the wizard - Fixed internal firmware date issue NOTE: This firmware and 2.07 firmware are not backwards compatible with older wizards. WPA does not work in Wireless Bridge/Repeater mode in this releas Version 2.07 March 1, 2004 ETSI (ver.2 initial release) - Updated User Interface format and layout - Adds AP Client Mode - Adds Wireless Repeater Mode for WAP54G and WRT54G (router requires fw 2.02.2 or above) - Access points running 1.0x firmware have to upgrade to 1.09.1 before they can be upgraded (filename for 1.09 firmware: osupgrade_for_ver_1_wap54g.trx). Note:WPA does not work in Wireless Bridge/Repeater mode in this release Version 1.09 - The firmware file is called osupgrade_for_ver_1_wap54g.trx - Updates the OS on the Access points running older firmware so they can be upgraded to the 2.07 firmware. NOT A FULL FUNCTIONAL FIRMWARE, REQUIRED FOR FUTURE UPGRADES. SIMULTANEOUSLY RELEASED WITH 2.07 firmware Note: If you try and upgrade an older unit to firmware 2.07 without upgrading the firmware to 1.09.1 prior to upgrade, you may damage the Access Point. Version 1.08 - Complies with final 802.11g standard - Added Wi-Fi Protected Access(TM) support including AES and TKIP encryption - Adds UI control to enable/disable frame bursting - Adds UI control for antenna selection - Added "B-Only" option to wireless modes - Added "Default" option to Basic Rate settings Note:WPA does not work in Wireless Bridge mode in this release Version 1.06, February 18, 2003 - Improves Stability and Performance - Improves Performance in mixed environment - Improves compatibility with Legacy Client Adapter - Fix Event Log (Records client MAC Address) - Fix Bridging with WAP11 on some channels Note: Please make sure to reset/reboot the unit after firmware upgrade is complete. Version 1.05 - Initial ReleaseDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.