IC Plus IP1000 Family Gigabit Ethernet Adapter
Windows NDIS6 driver
Contents:
---------
1. File Description
2. Driver Installation for Windows Vista
3. Parameters Description
1. File Description
-------------------
Filename Description
================= =====================================================
README.TXT Presents a summary of the contents for Windows NDIS
driver installation.
NETIPGD.INF Windows installation INFormation file for install
IPGDND60.SYS Windows Vista NDIS 6.0 driver
2. Driver Installation for Windows Vista
------------------------------------------------
The Windows installation floppy or CD is needed to complete this
installation.
Adapter Installation Procedure
--------------------------------------------
a. Make sure your computer is power-off.
b. Plug the adapter into one PCI 33MHz slot of your computer.
c. Turn on the power.
Install and/or Update driver from diskette
------------------------------------------
The following steps can help you install or update the driver to
the one in the Adapter Drivers Diskette/CD-ROM.
a. Open Control Panel, double click "Device Manager" icon to open Device Manager
Window.
b. In Other device category, right-click
Ethernet Controller
and select "Update Driver Software".
c. Browse to the direcotry with the device driver and click on Next.
d. The wizard will automatically search the device driver in the browsed directory,
and install the driver.
3. Parameter Description
------------------------
a. Open Control Panel, double click "Device Manager" icon to open Device Manager
Window.
b. In Network Adapters category, right-click
IC Plus IP1000 Family Gigabit Ethernet Adapter
and select "Property".
c. In Advanced, following parameters can be used to configure the adapter.
Connection Type Specify the connection type for the adapter.
Default: Auto-Sense
Network Address Set the Ethernet address for your adapter.
It is not recommended to use this.
Default: read address from adapter ROM.
Receive Buffers Set the number of Receive Buffers Descriptors
Default : 96
Transmit BUffers Set the number of Transmit Buffers Descriptors
Default : 96
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.