#
| README file for
|
| ELSA WINNER Windows 95 Driver Disk, ver 1.03
|
| WINNER 1000 (ISA/EISA, PCI, VL)
| WINNER 1000PRO
| WINNER 1000AVI
| WINNER 1000TRIO
| WINNER 2000 (ISA/EISA, VL)
| WINNER 2000AVI
| WINNER 2000PRO
| WINNER 2000PRO/X
| GLoria
|
| Copyright (c) 1994-97 ELSA AG, Aachen (Germany)
|
| ELSA AG Internet : http://www.elsa.de
| Sonnenweg 11 LocalWeb : +49-(0)241-938800
| D-52070 Aachen CompuServe : GO ELSA
|
| ELSA Inc. Internet : http://www.elsa.com
| 2231 Calle De Luna CompuServe : GO ELSA
| Santa Clara, CA 95054
| USA
|
| ELSA Asia Inc. Internet : http://www.elsa.com
| 7F-11, No. 188, Sec. 5 CompuServe : GO ELSA
| Nanking East Road
| Taipeo 105
| Taiwan, R. O. C.
|
| 10/23/97, GBorgs
Contents
1. Overview
2. Contents
3. Installation
4. History
5. Release Notes
6. Known Bugs and Operating Notes
------------------------------------------------------------------------
1. Overview
This disk contains the ELSA WINNER Display Driver for
Microsoft Windows 95.
The drivers support 256, 32768 and 16 Million colors in all
resolutions available on used ELSA WINNER board.
------------------------------------------------------------------------
2. Contents
Almost all files are compressed, their names are slighly
changed. Please note that the files can NOT just be copied
from this disk. (see installation)
The directory contains the following files:
DATE.DOC file identifying the disk, prod. date, etc.
README.TXT the file you currently look at
LIESMICH.TXT german version of README
ELSAINI.TXT additional informations for file ELSA.INI
(german)
WINNER.DRV driver file for "Non-PRO"-boards
WINPRO.DRV driver file for "PRO"-boards
WINPRX.DRV driver file for TRIO, AVI, PRO/X, GLoria
MINIWIN.VXD virtual mini display driver
WINIC95.DLL display driver extension (initialization)
WINEX32.DLL display driver extension (32 bit extensions)
ELSAD16.DLL display driver extension (DCI)
ELSADD.DLL display driver extension (DirectDraw HAL)
ELSADISP.INF device information file for ELSA boards
ELSAMON.INF device information file for ELSA monitors
WINMAN.EXE WINman program
WINMAN.MON WINman monitor configuration file
WINMADEU.DLL german resource DLL for WINman
WINMAENG.DLL english resource DLL for WINman
WINMADEU.HLP german help file for WINman
WINMAENG.HLP english help file for WINman
In case of trouble during or after installation, please make
sure you have all the files mentioned above!
------------------------------------------------------------------------
3. Installation
This section descibes the steps to install a ELSA WINNER
Display Driver for Windows 95
3.1 Install over older versions of the ELSA WINNER Driver
- Delete in the WINDOWS\INF directory the copies of the
older versions ELSADISP.INF (named OEM?.INF).
- Install the original MS-S3 driver to build a new Device
Information Database.
- Now follow th steps, described in section 3.2.
3.2 First installation of ELSA WINNER Display Drivers
First install Windows 95 without special drivers for the ELSA
WINNER graphics board. The installation procedure should
install a Microsoft driver for boards based on S3 chips.
The installation of the ELSA WINNER Display Driver starts from
the Windows desktop.
- Start the dialog "Properties for Display" by clicking right
mouse button on the desktop or per Control Panel.
- Select the Property Page "Settings"
- Push the button "Change Display Type...". A dialog "Change
Display Type" will pop up.
- Push the button "Change..." inside the frame "Adapter Type".
You will see the "Select Device" dialog.
- In this dialog push the button "Have Disk..." and insert the
ELSA WINNER Windows95 Driver Disk in the appropiate drive.
- Select in the "Manufacturer" list ELSA WINNER Display Driver
and in the list "Models" your WINNER board.
- If you use an ELSA monitor, make the same procedure for
"Monitor Type" in the "Change Display Type" dialog.
- Close the dialog "Change Display Type". At this time the
screen flickers a moment. This is not a bug! Windows tries to
find out, which graphics modes are available with this
driver.
- Now you can select resolution and color depth in the main
dialog "Properties for Display". For the first installation
you should select 1024x768 and 256 colors. This configuration
is available for all memory configurations on all ELSA
Boards.
- Close "Properties for Display" by "OK" or "Apply
now".
Normally you need to boot your system. Push the button "Restart
now".
In all following Windows sessions you can change the resolution
without rebooting your system.
------------------------------------------------------------------------
4. Revision History
This section describes changes to the previous releases of this
disk.
Version 1.01 - first release.
4.1 Version 1.02
- "Smoothy screen fonts" now works.
- Problems when using "Mouse Trails" with color and or animated
cursors fixed.
4.2 Version 1.03
- "Quick color depth change" now possible with Microsoft
QuickRes v2.0. (see 6.5.)
- Support for POWERdraft for Windows 95 added.
- DCI and DirectDraw support added
- Refresh-Rate support added.
------------------------------------------------------------------------
5. Release notes
5.1 ELSA.INI entries
The working mode of the driver can manipulate by entries in the
file ELSA.INI. Normally you will need to reboot your machine to
mak this settings working. In later releases ELSA will
distribute a tool change working paramters more easy.
The following table shows the meaning of this entries:
Section [Settings]
CursorFG/CursorBK
With this two entries you can change the color of the
hardware cursor. The format is:
CursorFG=0xrrggbb
at which rr, gg and bb are the hexadecimal values in
the range 00 to FF of the bas color components.
RefreshRate
You can change the vertical refresh rate by the entry
Hz=nn
Be carefully by changing this entry. To big values may
destroy your monitor.
Section [Hardware]
CursorType
In few resolution/color combinations on some S3-based
graphic boards the hardware cursor doesn't work. In
this cases you can force the usage of a software cursor
by inserting the line
CursorType=SW
in your ELSA.INI file.
This affects WINNER 1000 ISA/EISA, VL and PCI.
Video-RAM base address and size
Windows'95 needs direct access to the frambuffer of
your graphics board. Normally this takes place by 64kB
segments, mapped into the address space above 0A0000h.
On VL and PCI systems you can map the full video RAM
into the host address space. This increases the
performance of multimedia applications.
For example, insert the line
VRAM-Base=0xA0000000
to map the video RAM at the physical address
A00000000h.
Note that this address has to be above the end of your
main memory and that it has to be a multiple of the RAM
size of your graphics board. Additionally the end of the
graphics RAM must not be above the addressable range of
your bus type. These are for ISA bus 16MB, VL 128MB and
PCI 4GB.
If you specify a VRAM-Base you also need to insert a
VRAM-Size entry:
for WINNER 1000AVI, WINNER 2000AVI,
WINNER 2000PRO/X and GLoria use
VRAM-Size=0x4000000
and for all other (previous) WINNER use
the size of the video memory in bytes.
------------------------------------------------------------------------
6. Known Bugs and Operating Notes
This section documents known anomalies or problems and gives
hints on work arounds.
6.1 Videomode not available
Because the controls for Desktop area and Color resolution
display ALL possible modes on ALL WINNER boards not all
indicated resolutions are available. The attempt to select such
a mode fails. Windows rejects this attempt with a corresponding
notification message.
6.2 No mouse pointer visible
On the WINNER 1000, WINNER 1000VL, and WINNER 1000PCI under
32 bpp no mouse pointer is visible. Enable Mouse Trails with a
very short trail in "Properties for Mouse" in the Control Panel.
6.3 After the installation no mouse cursor is visible
Probably there is no ELSA WINNER graphics driver active, but
a standard driver for Microsoft S3 processors. This driver
cannot recognize the the ELSA WINNER graphics board correctly.
- To avoid this problem please install the ELSA WINNER graphics
driver for Windows 95.
- Shut down Windows 95 with ALT-F4. While starting press F8.
In the following menu choose the third entry "3. Save mode".
Windows 95 will now start in a save mode with standard VGA
resolution. Now install the ELSA WINNER driver for Windows 95.
or:
- Activate the software cursor (e.g. animated mouse cursor) or
the mouse track.
Hints:
When the Device Manager recognizes the ELSA WINNER graphics
board correctly, it is possible that no ELSA WINNER driver is
active.
With the Device Manager you can get information for all
drivers (e.g. company). With the ELSA driver you will find
the entry "ELSA AG Aachen (Germany)".
6.4 WINNER 1000AVI-VL
This board works only with up to 64MB main memory. The S3 chips
868/968 need 64MB physical address space and the VL-bus can
only access 128 MB. For this board use the following entries
in the section [Hardware] in your ELSA.INI file:
VRAM-Base=0x4000000
VRAM-Size=0x4000000
6.5 QuickRes 2.0 and Hardware Cursor
Now it is possible to change the current Color-resolution
(BPP) without rebooting Windows. Microsoft QuickRes 2.0
switches the CursorType to Software when changing the
color resolution. You can switch back to Hardware Cursor with
"Properties for Mouse". Click Motion/Trail "on" and "off".
6.6 GLoria-8
The resolution 1024 x 768 in 8 bpp (256 colors) could cause
problems with vertical refresh rates higher than 100 Hz.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.