; S3.INF
;
; Installation inf for the S3 Incorporated display driver.
;
[Version]
Signature="$CHICAGO$"
Provider=%S3%
ClassGUID={4D36E968-E325-11CE-BFC1-08002BE10318}
Class=Display
[DestinationDirs]
DefaultDestDir = 11
S3Inc.Miniport = 12 ; drivers
S3Inc.Display = 11 ; system32
S3Inc.ConfigFile= 12 ; config files to the drivers directory
COLORcopy.sys=11 ; KV2 color adjustment for YUV
COLORcopy.hlp=18
;
; Driver information
;
[Manufacturer]
%S3% = S3.Mfg
;
; This section should be modified to reflect the chip strings the
; user will see in the Displays applet when the new driver is being
; installed from the driver diskette.
;
[S3.Mfg]
%S3% 86C911/86C924/86C928/86C928PCI = S3Inc
%S3% 86C801/86C805/86C805i = S3Inc
%S3% Vision864/964/866/868/968 = S3Inc
%S3% Trio32/Trio64/Trio64V+/Trio64V2 = S3Inc
;
; General installation section
;
[S3Inc]
CopyFiles=S3Inc.Miniport, S3Inc.Display, S3Inc.ConfigFile, COLORcopy.sys, COLORcopy.hlp
;
; File sections
;
[S3Inc.Miniport]
s3mini.sys ; miniport driver
[S3Inc.Display]
s3disp.dll ; display driver
;**************************************************************************
; Mode/Configuration File Installation
; ====================================
;
; To install a mode/refresh configuration file with the drivers:
;
; 1) Remove the leading ";" from the "%S3ConfigFile%" line in the
; [S3Inc.ConfigFile] section below. This will allow the configuration
; file to be copied from the driver diskette to the target system.
; 2) Remove the leading ";" in the "HKR..." line in the [S3Inc_Configuration]
; section below. This will place the configuration file name in the
; Registry.
; 3) Set S3ConfigFile to the mode/refresh filename in the [Strings] section
; at the bottom of this file.
;
;**************************************************************************
[S3Inc.ConfigFile]
;%S3ConfigFile% ; **** copy config file ****
[COLORcopy.sys]
S3COLOR.cpl,,,1
S3COLOR.cfg
[COLORcopy.hlp]
S3COLOR.hlp
;
; Service Installation
;
[S3Inc.Services]
AddService = S3Inc, 0x00000002, S3Inc_Service_Inst, S3Inc_EventLog_Inst
[S3Inc_Service_Inst]
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 1 ; SERVICE_SYSTEM_START
ErrorControl = 0 ; SERVICE_ERROR_IGNORE
LoadOrderGroup = Video
ServiceBinary = %12%\s3mini.sys
[S3Inc_EventLog_Inst]
AddReg = S3Inc_EventLog_AddReg
[S3Inc_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%SystemRoot%\System32\IoLogMsg.dll;%SystemRoot%\System32\drivers\s3mini.sys"
HKR,,TypesSupported,0x00010001,7
;
; Software Installation
;
[S3Inc.SoftwareSettings]
AddReg = S3Inc_SoftwareDeviceSettings
AddReg = S3Inc_Configuration ; mode/refresh config file section
; AddReg = S3Inc_AuroraSettings
AddReg = S3COLOR.AddReg
;
; This section is used to place the mode/refresh configuration filename
; in the Registry. (See [S3Inc.ConfigFile] section above)
;
[S3Inc_Configuration]
;HKR, , ModeCfgFile, %REG_EXPAND_SZ%, \SystemRoot\system32\drivers\%S3ConfigFile%
[S3Inc_SoftwareDeviceSettings]
HKR,, InstalledDisplayDrivers, %REG_MULTI_SZ%, s3disp
HKR,, VgaCompatible, %REG_DWORD%, 0
; [S3Inc_AuroraSettings]
; HKR,, AuroraDisplayType, %REG_DWORD%, 0
;
; Source file information
;
[SourceDisksNames.x86]
1 = %DiskId%,,,""
[SourceDisksFiles]
s3mini.sys = 1 ; all files on Disk 1
s3disp.dll = 1
%S3ConfigFile% = 1
S3COLOR.cpl=1
S3COLOR.cfg=1
S3COLOR.hlp=1
[S3COLOR.AddReg]
;HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\S3COLOR,DisplayName,,"S3 Color Control"
;HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\S3COLOR,UninstallString,,"RunDll setupx.dll,InstallHinfSection S3COLORRemove 4 S3COLOR.inf"
;
HKLM,Software\S3\S3COLOR
HKLM,Software\S3\S3COLOR,Installed,0,1
[Strings]
;
; Non-Localizable Strings
;
REG_SZ = 0x00000000
REG_MULTI_SZ = 0x00010000
REG_EXPAND_SZ = 0x00020000
REG_BINARY = 0x00000001
REG_DWORD = 0x00010001
SERVICEROOT = System\CurrentControlSet\Services
;
; Localizable Strings
;
DiskId = "S3 Incorporated Installation DISK (VIDEO)"
GraphAdap = "Graphics Adapter"
S3 = "S3 Incorporated"
;
; Add the name of the mode/refresh configuration file here. (See the
; [S3Inc.Configuration] section above. If no configuration file is used,
; set S3ConfigFile = "".
;
; ex. S3ConfigFile = "modes765.cfg"
;
S3ConfigFile = ""
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.