1. 2400r30.zip Driver
2. SCO4.TXT File Contents

SCO4.TXT Driver File Contents (2400r30.zip)

SCO UNIX 4.X
This is an ASCII file called SCO4.TXT in the ATI 
CardAssistant \TXT\UNIX directory. Use a text editor or 
word processor with a mono-space font such as Courier 
to print this file if needed for reference.
************************************************************
************************************************************
**                                                        **
**        Installing the AT-2400 Driver on SCO 4.x        **
**                                                        **
************************************************************
************************************************************

------------------------------------------------------------
--                        Contents                        --
------------------------------------------------------------
I.   Special Considerations 
II.  Files Needed for Installation
III. Installing the AT-2400 with SCO 4.x 


I. Special Considerations
=========================
This document describes the procedure to install the SCO 
UNIX driver for the AT-2400 Ethernet adapter.

Configuration of the AT-2400 is under PCI control. For most 
applications, no setup other than normal installation of 
the network software is necessary. To view the card's 
configuration or to run Diagnostics, use the CardAssistant 
setup program, SET2400.EXE. 


II. Files Needed for Installation
=================================

Location of Files: \SCO\4.X

The following files will be used in this installation:
------------------------------------------------------
DRIVER.O    :  SCO Driver 
SETUP       :  Transfer DOS format to UNIX format setup 
INFO        :  Used by netconfig 
INIT        :  Used by netconfig 
MASTER      :  Used by netconfig 
NODE        :  Used by netconfig 
RECONF      :  Used by netconfig 
REMOVE      :  Used by netconfig 
SPACE.C     :  Used by netconfig 
SYSTEM      :  Used by netconfig 


III. Installing the AT-2400 with SCO 4.x 
========================================

Before you start with the installation process, make sure 
that the SCO UNIX system is properly installed. Similarly, 
your adapter should also be properly installed in your 
machine.

1. Login as root user. (On maintenance mode)

2. Put CardAssistant diskette to floppy A: and use doscp 
   command to copy the file "setup" for installing SCO 
   UNIX PCI Driver into UNIX directories as following :

            # cd /
            # doscp A:/SCO/4.X/setup /setup
            # chmod +x /setup
            # ./setup

The setup program will ask you for the path. Key in: 

                      a:/sco/4.x

3. Use the netconfig utility; available options :

              # netconfig

   The screen displays the following message. 
   Select item (1) to Add a chain  :

             1) Add a chain
             2) Remove a chain
             3) Reconfigure an element in a chain
             4) Quit

4. After this step is completed, the screen displays 
   the next options message :

   Select item (4) : sco_tcp   SCO TCP/IP for UNIX

5. When you have completed this step, various 
   adapter drivers are installed in SCO UNIX. Select 
   "AT-2400 PCI Family Ethernet Driver board 0".

6. Add chain sco_tcp -> pci0 (y/n),   TYPE 'y'

7. Enter the IP address of this interface ,
   for example : 192.9.9.1

8. Enter the subnet mask for this interface (default 
   255.255.255.0).

9. Does the interface use a broadcast address of all 
   1's (y/n), default : y

10. Enter the broadcast address for this interface, 
    default : xxx.xx.x.255; press ENTER

11. Are these values correct ? (y/n)   TYPE 'y'

12. Pseudo ttys are currently configured, do you want to: 

    1) Add Pseudo ttys
    2) Remove Pseudo ttys
    Select an option or enter q to quit [q]   TYPE 'q'

13. Available options:

    1) Add a chain
    2) Remove a chain
    3) Reconfigure a element in a chain
       q. Quit

    Select option: q

14. Do you want to relink to kernel now ?               y 

15. Do you want this kernel to boot by default (y/n)    y

16. Do you want the kernel environment rebuilt (y/n)    y

17. Reboot UNIX: # shutdown -g0


*  Third-party trademarks are the property of their 
   respective owners.