Hardware specifications This is an ASCII file called HWSPECS.TXT in the ATI CardAssistant INFO directory. Use a text editor or a word processor with a mono-space font such as Courier to print this file if needed for reference. ************************************************************ ** ** ** Specifications for the ATI AT-2500 PCI adapter ** ** ** ************************************************************ System compatibility -------------------- PCI systems PC Interface ------------ Bus Interface PCI, 2.1 compliant Bus Width 32-bit Data Transfer Mode PCI Bus Mastering Ethernet Interface ------------------ 10BaseT 2-pair EIA/TIA Category 3, 4 or 5 10Base2 RG58 Coaxial, Bayonnet Nut Couple (BNC) Connector Data Rate mode -------------- 10 Mbps Maximum Cabling Distances ------------------------- 10BaseT 100 meters 10Base2 185 meters Interrupt levels ---------------- PCI: INTA, supports shared or assigned interrupts Base I/O Memory Address ----------------------- Assigned by BIOS PCI configuration space supports DWORD, WORD and BYTE access Power requirements ------------------ 5 Watts @ +5 VDC Dimensions ---------- Half Size form factor Operating temperature --------------------- 0 - 55 degrees C (32 - 131 F) Operating Humidity ------------------ 85% at +55 C non-condensing Reliability ----------- Calculated MTBF > 300,000 hours Standards Compliance -------------------- IEEE 802.2, ISO, IEC 8802-3 Electrical Approvals -------------------- FCC Class A, CUL, CE Diagnostic LED -------------- Link Indicates that a valid connection exists Diagnostic software ------------------- On-board On-network Responder * Third-party trademarks are the property of their respective owners.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.