Diagnostics LED This is an ASCII file called DIAGLED.TXT in the ATI CardAssistant \TXT\GENERAL directory. Use a text editor or word processor with a mono-space font such as Courier to print this file if needed for reference. ************************************************************ ** ** ** Functions of the Diagnostics LED ** ** ** ************************************************************ LNK: Indicates the adapter is connected to a hub or switch and is receiving link pulses. If the LNK light isn't on, check all connections at the adapter. Make sure the hub or switch is transmitting at the correct speed and the drivers are loaded. Also, make sure you have the correct wiring configuration for the adapter. On a UTP segment, a few hubs and switches require a cross-over cable rather than a straight-through cable. See the UTP topic in the file UTP_CBL.TXT. On a thinnet segment, make sure cabling conforms to 10Base2 rules for length, node spacing and termination. See the thinnet topic in the file RG58_CBL.TXT. * Third-party trademarks are the property of their respective owners.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.