Windows NT 3.5
Introduction:
-------------
This document describes the procedure to install Windows NT v3.5
driver for ISA Plug&Play ethernet adapter.
Location of Driver: \WINNT40\PNPWNT.SYS
Installing driver procedure on Microsoft Windows NT :
-----------------------------------------------------
1. Start Windows NT.
2. Double-click the Main group icon.
3. Double-click the Control Panel.
4. Double-click the Network icon.
The Network Settings window appears.
5. Click the Add Adapter button.
The Add Network Adapter window appears.
6. Select the "<Other> Requires disk from manufacturer" option then click
the Continue button.
7. Insert the Driver Diskette into the floppy drive.
8. At the Insert Disk window type:
A:\WINNT40
9. Click the OK button.
The Select OEM Option window appears.
10. Select the ISA Plug & Play Ethernet Adapter
11. Click the OK button.
A screen appears with "Input Ethernet ID" dialog box. This option
is only required when you have more than one EtherPaC ISA LAN
adapters in this computer.
12. Select Skip, if only one adapter is installed in this computer.
Windows NT will perform the binding process. If any additional network
software options were installed, you may be prompted for specific
information for these packages.
13. Select the ISA bus type and click the OK button.
14. Complete the installation by following instructions provided by
Windows NT.
15. Restart the computer.
NOTES:
------
* Installing Multiple LAN Adapters:
Start Windows NT and follow above setup procedure. In the
"Network Settings" dialog box, choose the "Configure.." button.
The "Input Ethernet ID" dialog box appears and enter the
adapter's Ethernet ID. Select OK and close Network setup.
Select SKIP if only one adapter is installed in this computer.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.