;; netati25.inf
;;
;; Allied Telesyn Fast-Ethernet Network Interface Cards.
;;
;; Copyright 1997, Allied Telesyn International Corporation
[Version]
LayoutFile=layout.inf
Signature="$CHICAGO$"
Class=Net
ClassGUID={4d36e972-e325-11ce-bfc1-08002be10318}
Provider=%V_MS%
[Manufacturer]
%V_ATI%=ATI
[ATI]
%AT2500.DeviceDesc%=AT2500.ndi,PCI\VEN_10EC&DEV_8139&SUBSYS_25001259
[SourceDisksNames]
52="Allied Telesyn AT-2500TX CardAssistant Disk",,0
[SourceDisksFiles]
a2500m.sys =52,,a2500m.sys,12345
netati25.inf =52,,netati25.inf,1234
a2500.dos =52,,a2500.dos,12345
a25odi.com =52,,a25odi.com,12345
[AT2500.ndi]
;CopyFiles=AT2500.CopyFiles
;DelFiles=AT2500.DelFiles
AddReg=AT2500.ndi.reg,rtlrtf.ndi.reg,pci129.ndi.reg
;;****************************************************************************
;; *AT-2500 Allied Telesyn AT-2500TX
;;****************************************************************************
[AT2500.ndi.reg]
HKR,Ndi,DeviceID,0,"PCI\VEN_10EC&DEV_8139&SUBSYS_25001259"
HKR,Ndi\Install,,0,AT2500.install
HKR,NDI\Params\DuplexMode,flag,1,30,00,00,00
HKR,Ndi\params\DuplexMode,ParamDesc,0,"Link Speed/Duplex Mode"
HKR,Ndi\params\DuplexMode,type,0,enum
HKR,Ndi\params\DuplexMode,default,0,0
HKR,Ndi\params\DuplexMode\enum,0,0,"Use Hardware Settings"
HKR,Ndi\params\DuplexMode\enum,1,0,"Auto Sense (NWAY)"
HKR,Ndi\params\DuplexMode\enum,2,0,"10Mb / Half Duplex"
HKR,Ndi\params\DuplexMode\enum,3,0,"10Mb / Full Duplex"
HKR,Ndi\params\DuplexMode\enum,4,0,"100Mb / Half Duplex"
HKR,Ndi\params\DuplexMode\enum,5,0,"100Mb / Full Duplex"
HKR,Ndi\Params\EarlyTxThreshold,ParamDesc,0,"Early Tx Threshold"
HKR,Ndi\Params\EarlyTxThreshold,Type,0,"int"
HKR,Ndi\Params\EarlyTxThreshold,Default,0,"10"
HKR,Ndi\Params\EarlyTxThreshold,Flag,1,20,00,00,00
HKR,Ndi\Params\EarlyTxThreshold,Min,0,"0
HKR,Ndi\Params\EarlyTxThreshold,Max,0,"63"
HKR,Ndi\Params\EarlyTxThreshold,Step,0,"1"
HKR,Ndi\Params\EarlyTxThreshold,Base,0,"10"
HKR,NDI\Params\NetworkAddress,flag,1,30,00,00,00
HKR,Ndi\params\NetworkAddress,flag,1,30,00,00,00
HKR,Ndi\params\NetworkAddress,ParamDesc,0,"Network Address"
HKR,Ndi\params\NetworkAddress,type,0,edit
HKR,Ndi\params\NetworkAddress,default,0,"000000000000"
HKR,Ndi\params\NetworkAddress,LimitText,0,12
HKR,Ndi\params\NetworkAddress,UpperCase,0,1
HKR,Ndi\params\NetworkAddress,Optional,0,1
;;****************************************************************************
;;
;;****************************************************************************
[rtlrtf.ndi.reg]
; key,subkey,valuname,type,value
HKR,,DriverDesc,0,"Allied Telesyn AT-2500TX PCI 10/100 Ethernet Controller"
HKR,,DevLoader,0,*ndis
HKR,,DeviceVxDs,0,a2500.sys
HKR,,EnumPropPages,0,netdi.dll,EnumPropPages
; NDIS Info
HKR,NDIS,MajorNdisVersion,1,03
HKR,NDIS,MinorNdisVersion,1,0a
HKR,NDIS,LogDriverName,0,"a2500"
HKR,NDIS\NDIS2,DriverName,0,"a2500$"
HKR,NDIS\NDIS2,FileName,0,"a2500.dos"
HKR,NDIS\ODI,DriverName,0,"a25odi"
HKR,NDIS\ODI,FileName,0,"a25odi.com"
; Interfaces
HKR,Ndi\Interfaces,DefLower,0,"ethernet"
HKR,Ndi\Interfaces,LowerRange,0,"ethernet"
HKR,Ndi\Interfaces,DefUpper,0,"ndis2,ndis3"
HKR,Ndi\Interfaces,UpperRange,0,"ndis2,ndis3,odi"
; Install sections
HKR,Ndi\Install,ndis3,0,"rtlrtf.ndis3"
HKR,Ndi\Install,ndis2,0,rtlrtf.ndis2
HKR,Ndi\Install,odi,0,rtlrtf.odi
;;****************************************************************************
;; PCI common parameters
;;****************************************************************************
[pci129.ndi.reg]
;;params
;HKR,,MediaType,0,1
;HKR,,AdapterType,0,5
;HKR,,BusType,0,5
;; Resources
HKR,,InterruptNumber,1,04,00,00,00
HKR,,IOBaseAddress,1,02,00,00,00
HKR,NDI\params\InterruptNumber,resc,1,04,00,00,00
HKR,Ndi\params\interruptNumber,ParamDesc,0,"Interrupt Level"
HKR,NDI\params\InterruptNumber,flag,1,20,00,00,00
HKR,NDI\params\IOBaseAddress,resc,1,02,00,00,00
HKR,NDI\params\IOBaseAddress,ParamDesc,0,"I/O Base Address"
HKR,NDI\params\IOBaseAddress,flag,1,20,00,00,00
;;ndis2
HKR,NDI\params\Interrupt,resc,1,04,00,00,00
HKR,Ndi\params\interrupt,ParamDesc,0,"Interrupt Level"
HKR,NDI\params\Interrupt,flag,1,10,00,00,00
HKR,NDI\params\IOBase,resc,1,02,00,00,00
HKR,NDI\params\IOBase,ParamDesc,0,"I/O Base Address"
HKR,NDI\params\IOBase,flag,1,10,00,00,00
;;****************************************************************************
;; Drivers
;;****************************************************************************
;; Install NDIS3
[rtlrtf.ndis3]
CopyFiles=rtlrtf.ndis3.CopyFiles,AT2500.inf.CopyFiles
DelFiles=AT2500.DelFiles
[rtlrtf.ndis3.CopyFiles]
a2500.sys,,,2
[AT2500.inf.CopyFiles]
netati25.inf,,,2
[AT2500.DelFiles]
drvidx.bin,,,1
drvdata.bin,,,1
;;Install NDIS2
[rtlrtf.ndis2]
CopyFiles=rtlrtf.ndis2.CopyFiles
[rtlrtf.ndis2.CopyFiles]
a2500.dos,,,2
;;Install ODI
[rtlrtf.odi]
CopyFiles=rtlrtf.odi.CopyFiles
[rtlrtf.odi.CopyFiles]
a25odi.com,,,2
;;****************************************************************************
;; Destination Directories
;;****************************************************************************
[DestinationDirs]
DefaultDestDir =11 ; LDID_SYS
rtlrtf.ndis3.CopyFiles =11
rtlrtf.ndis2.CopyFiles =26 ; LDID_WINBOOT
rtlrtf.odi.CopyFiles =26
AT2500.inf.CopyFiles =17 ; INF
AT2500.DelFiles =17
;AT2500.help.CopyFiles =?? ; Help file
;;****************************************************************************
;; Localizable Strings
;;****************************************************************************
[strings]
;;Provider
V_MS="Microsoft"
;;Manufacturers
V_ATI="ATI"
;;PCI ATI Devices
AT2500.DeviceDesc="Allied Telesyn AT-2500TX PCI 10/100 Ethernet Adapter"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.