SCO UNIX 5.X
This is an ASCII file called SCO5.TXT in the ATI
CardAssistant INFO directory. Use a text editor or a
word processor with a mono-space font such as Courier
to print this file if needed for reference.
************************************************************
************************************************************
** **
** Installing the AT-2500 Driver on SCO 5.x **
** **
************************************************************
************************************************************
------------------------------------------------------------
-- Contents --
------------------------------------------------------------
I. Special Considerations
II. Files Needed for Installation
III. Installing the AT-2500 with SCO 5.x
I. Special Considerations
=========================
This document describes the procedure to install the SCO
UNIX driver for the AT-2500 Fast Ethernet adapter.
Configuration of the AT-2500TX is under PCI control, and
the AT-2500TX is NWAY capable. For most applications, no
setup other than normal installation of the network
software is necessary. For any half-duplex application, the
card by default auto-detects the speed of the link (10 Mbps
or 100 Mbps). If the connection is full-duplex without NWAY
capability, you must select one of the full-duplex settings.
In this case, refer to the "Connection speed and duplex"
information file.
II. Files Needed for Installation
=================================
Location of Files: \SCO\5.X
The following files will be used in this installation:
------------------------------------------------------
Driver.O : SCO Driver
INSTALL : Transfer DOS format to UNIX format setup
Master : Used by netconfig
System : Used by netconfig
Node : Used by netconfig
Space.c : Used by netconfig
space.h : Used by netconfig
lkcfg : Used by netconfig
r6e : Used by netconfig
r6e.h : Used by netconfig
III. Installing the AT-2500 with SCO 5.x
========================================
Before you start with the installation process, make sure
that the SCO UNIX system is properly installed. Similarly,
your adapter should also be properly installed in your
machine.
1. Login as root user. (On maintenance mode)
2. Put CardAssistant diskette to floppy A: and use doscp
command to copy the file "install" for installing SCO
UNIX PCI Driver into UNIX directories as follows:
# cd /
# doscp A:/SCO/5.X/install /install
# chmod +x /install
# ./install
The install program will ask you for the path. Key in:
a:/sco/5.x
3. Use the netconfig utility; available options :
# netconfig
4. To add adapters, select "Add New LAN Adapter" from
"Hardware".
5. Add Protocol to select SCO TCP/IP.
6. Enter the IP address of this interface,
for example : 192.9.9.1
7. Enter the subnet mask for this interface (default
255.255.255.0).
8. Enter the broadcast address for this interface,
default : n.n.n.n.
9. Do you want to relink to kernel now? y
10. Do you want this kernel to boot by default (y/n) y
12. Do you want the kernel environment rebuilt (y/n) y
13. Reboot UNIX: # shutdown -g0
* Third-party trademarks are the property of their
respective owners.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.