Diagnostic LEDs
This is an ASCII file called DIAGLED.TXT in the ATI
CardAssistant INFO directory. Use a text editor or a
word processor with a mono-space font such as Courier
to print this file if needed for reference.
************************************************************
** **
** Functions of the Diagnostics LEDs **
** **
************************************************************
100: Indicates 100 Mbps when on, and 10 Mbps when off.
ACT: Indicates read/write activity on the network. It
doesn't always mean there is activity on this adapter.
If the ACT light isn't on, make sure the network is
operating and the drivers are loaded.
LNK: Indicates the adapter is connected to a hub or switch
and is receiving link pulses. If the LNK light isn't
on, check all connections at the adapter. Make sure
the hub or switch is transmitting at the correct speed
and the drivers are loaded.
Also, make sure you have the correct wiring
configuration for the adapter. A few hubs and
switches require a cross-over cable rather than a
straight-through cable.
* Third-party trademarks are the property of their
respective owners.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.