1. 2500v1up.exe Driver
  2. OEMSETNT.INF File Contents

OEMSETNT.INF Driver File Contents (2500v1up.exe)

 DOWNLOAD NOW
OEMSETNT.INF Driver Update Utility 
;********************************************************************
;
; ATI AT-2500v1 PCI 10/100 Ethernet miniport driver oemsetup file
;   for WinNT 3.5x, 4.0
;
;********************************************************************

[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    ISA
    EISA
    "Jazz-Internal Bus"
[Options]
    RTL8129
[FileConstants]
UtilityInf      = "UTILITY.INF"
ParamInf        = "NCPARAM.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "Realtek"
ProductMajorVersion     = "1"
ProductMinorVersion     = "1"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "AT2500v1"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\AT2500.sys"
NetRuleSoftwareType     = "rtl8129Sys ndisDriver rtl8129Driver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """Rtl8129Sys"" yes no container"
NetRuleSoftwareClass    = {"rtl8129Driver basic"}
NetRuleSoftwareBindable = {"rtl8129Driver rtl8129Adapter non exclusive 100"}
ProductHardwareName     = "AT2500v1"
NetRuleHardwareType     = "rtl8129 rtl8129Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"rtl8129Adapter basic"}
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
           goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    Debug-Output "clt begin Install Option sectoin "
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    Debug-Output "clt begin to run "
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Debug-Output "clt after begin: "
    set ActivateDetection = FALSE
    Ifstr(i) $(!NTN_InstallMode) == deinstall
                set StartLabel = removeadapter
        else-Ifstr(i) $(!NTN_InstallMode) == Update
                        set StartLabel = UpgradeSoftware
        else-Ifstr(i) $(!NTN_InstallMode) == bind
                set StartLabel = bindingadapter
        else-Ifstr(i) $(!NTN_InstallMode) == configure
                set CommonStatus = STATUS_REBOOT
                set ActivateDetection = TRUE
                set StartLabel = configureadapter
                Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                        Debug-Output "Cannot configure the Realtek RTL8129 PCI driver software."
                        Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error: cannot get an error string."
                                goto ShellCodeError
                        endif
                        set Error = $($R0)
                        set from = end
                        set to = end
                        goto nonfatalinfo
                endif
    else
                set StartLabel = installadapter
                set OEM_ABANDON_OPTIONS = {}
                set OEM_ABANDON_SOFTWARE = FALSE
                set OEM_ABANDON_ON = TRUE
                set ActivateDetection = TRUE
    endif
    Debug-Output "clt: =================================================="
    Debug-Output "clt: STF_CWDIR is: "$(!STF_CWDIR)
    Debug-Output "clt: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    Debug-Output "clt: Option is: "$(Option)
    Debug-Output "clt: !STF_NCDETECT  is: "$(!STF_NCDETECT)
    Debug-Output "clt: !STF_NCOPTION  is: "$(!STF_NCOPTION)
    Debug-Output "clt: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
    Debug-Output "clt: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
    Debug-Output "clt: =================================================="
    Set DetectedCard = FALSE
    Set EtherID = ""
    Set NetworkAddress = "000000000000"
    set EarlyTxThreshold = 09
    Ifstr(i) $(ActivateDetection) != TRUE
        Goto skipdetection
    Endif
;   Set TypeList = {{IRQ,IRQList,IRQValue},+
;                   {IOADDR, IOBaseAddrDecList, IOBaseAddrValue}}
;   Debug-Output "clt: Calling Param_BuildTypeLists"
;   Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList)
;   Set Status = $($R0)
;   ifstr(i) $(Status) != STATUS_SUCCESSFUL
;       Goto fataldetect
;   Endif
;   Debug-Output "clt: Calling Param_SetDefaults"
;   Shell $(ParamInf) Param_SetDefaults {}
;   Shell $(ParamInf) HexListFromDecList $(IOBaseAddrDecList)
;   Set IOBaseAddrHexList = $($R0)
;   Shell $(UtilityInf) SortList $(IRQList) TRUE FALSE
;   Set IRQList = $($R0)
;3/6/95    Ifstr(i) $(!STF_NCDETECT) == YES
;3/6/95        Ifstr(i) $(!STF_NCOPTION) == $(Option)
;3/6/95           Set DetectedCard = TRUE
;3/6/95           Debug-Output "clt: Setting DetectedCard to TRUE"
;3/6/95        Endif
;3/6/95    Endif
skipdetection =+
    Debug-Output "clt after skipdetection "
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
;;;;;;;;;;;12/09/1996 clt ;;;;;;;;;;;;;;;;;;;;;;;
;;install "Install-RSET"   ; copy tracer.dll to winnt35/system32
install "Install-help"   ; copy sample.hlp to winnt35/system32
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    Debug-Output "clt after installadapter "
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           goto end
        else
           Shell $(UtilityInf), CardExistedDlg
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           ifstr(i) $($R1) != "OK"
               set CommonStatus = STATUS_USERCANCEL
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    endif
    Ifstr(i) $(DetectedCard) != TRUE
        Goto adaptersetup
    Endif
    StartWait
    Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
    EndWait
    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
        Goto adaptersetup
    Endif
    Set DetectedParams = $($R1)
    Debug-Output "clt: Calling Param_SetDefaults to merge detected params"
    Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
    goto adapteroptions
configureadapter = +
    Debug-Output "clt after configureadapter: "
    Ifstr $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
            Debug-Output "Cannot find component product key"
            goto fatalregistry
        Endif
    Endif
    Debug-Output "INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "INF: FindService shell failure"
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Debug-Output "INF: FindService Shell error: "$($R0)
        Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        Debug-Output "Cannot find component service"
        goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)

;        Ifstr(i) $(ValueName) == "Speed"
;           set speed = $(ValueData)
;        else-ifstr(i) $(ValueName) == "SlotNumber"
        Ifstr(i) $(ValueName) == "SlotNumber"
            set DeviceNum = $(ValueData)
        else-ifstr(i) $(ValueName) == "EtherID"
            set EtherID = $(ValueData)
        else-ifstr(i) $(ValueName) == "NetworkAddress"
            set NetworkAddress = $(ValueData)
        else-ifstr(i) $(ValueName) == "BusType"
            set BusInterfaceType = $(ValueData)
        else-ifstr(i) $(ValueName) == "BusNumber"
            set BusNum = $(ValueData)
        else-ifstr(i) $(ValueName) == "FunctionNumber"
            set FunctionNum = $(ValueData)
        endif

    EndForListDo

;   ifstr(i) $(IRQValue) == ""
;       set IRQValue = *($(IRQList), 2)
;   endif
;   ifstr(i) $(IOBaseAddrValue) == ""
;       set IOBaseAddrValue = *($(IOBaseAddrDecList), 1)
;   endif
adaptersetup =+
    Debug-Output "clt after adaptersetup: "
    Shell $(ParamInf) Param_ParameterConfidence
    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
        Debug-Output "OEMNADE2.INF: parameter confidence too low to bypass configuration"
        Goto adapteroptions
    Endif
    Ifstr(i) $(DetectedCard) == TRUE
        Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
            Goto adapterverify
        Endif
    Endif
    goto adapteroptions
adapteroptions = +
    Debug-Output "clt after adapteroptions: "
    set from = adapteroptions
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
        ifstr(i) $(!AutoNetInterfaceType) != ""
            set BusInterfaceType = $(!AutoNetInterfaceType)
        else
            set BusInterfaceType = 1
        endif
        ifstr(i) $(!AutoNetBusNumber) != ""
            set BusNumber = $(!AutoNetBusNumber)
        else
            set BusNumber = 0
        endif
        goto adapterverify
    endif
;;;; clt 12/03/1996;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;set LibHandle = ""
;set Arg0 = 0
;set Arg1 = ""
;set Result = ""
;
;LoadLibrary "Setup" $(!STF_WINDOWSSYSPATH)\tracer.dll LibHandle
;
;LibraryProcedure Result $(LibHandle) AskLineSpeedDlg $(Arg0) $(Arg1)
;
;FreeLibrary $(LibHandle)
;
;set speed = $(Result)
;;;; clt 12/03/1996;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;


;;;;clt 11/25/1996;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       set SpeedValue1 = "auto"
;       set speed =  "auto"
;       set cltlist = {"auto", "10" ,"100"}


;   read-syms SpeedDlg$(!STF_LANGUAGE)
;   Debug-Output "clt before ui start inputDlg: "
;   ui start "InputDlg"
;   Debug-Output "clt after ui start inputDlg: "
;   ifstr(i) $(DLGEVENT) == "CONTINUE"
;               set speed    = $(ListItemsOut)
;   Debug-Output "clt Continue:"$(speed)
;               ui pop 1
;   else-ifstr(i) $(DLGEVENT) == "EXIT"
;;;;;;          set CommonStatus = STATUS_USERCANCEL
;               Debug-Output "select speed cancel."
;               ui pop 1
;               goto end
;   else
;               ui pop 1
;               Debug-Output "Action: unknown. Bye."
;               goto end
;   endif
;
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;



;;;; clt 12/03/1996;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;set LibHandle = ""
;set Arg0 = 0
;set Arg1 = ""
;set Result = ""
;
;LoadLibrary "Setup" $(!STF_WINDOWSSYSPATH)\tracer.dll LibHandle
;
;LibraryProcedure Result $(LibHandle) AskEtherDlg $(Arg0) $(Arg1)
;
;FreeLibrary $(LibHandle)
;
;;;; clt 12/03/1996;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;; set EtherID = $(Result)
set EtherID = ""
;;;;;;;;;;;;;;;;;;Ether ID;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
                ;;set EtherID = $(EditTextOut)
                set NetworkAddress = $(EditTextOut)
                ui pop 1
    else-ifstr(i) $(DLGEVENT) == "EXIT"
                ui pop 1
    else
                ui pop 1
                goto end
    endif
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
   set EarlyTxThreshold = "08"
   ;;;;;;;;;;;;;;;;;;Ether ID;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
       read-syms EarlyTxThresholdDlg$(!STF_LANGUAGE)
       ui start "InputDlg"
       ifstr(i) $(DLGEVENT) == "CONTINUE"
                   set EarlyTxThreshold = $(EditTextOut)
                   ui pop 1
       else-ifstr(i) $(DLGEVENT) == "EXIT"
                   ui pop 1
       else
                   ui pop 1
                   goto end
       endif



;   ifstr(i) $(!STF_NCDETINFO) == {}
;       Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
;       ifint $($ShellCode) != $(!SHELL_CODE_OK)
;           Debug-Output "ShellCode error."
;           goto ShellCodeError
;       endif
;       set BusInterfaceType = $($R1)
;       set BusNumber = $($R2)
;   else
;       set BusInterfaceType = *($(!STF_NCDETINFO),5)
;       set BusNumber = *($(!STF_NCDETINFO),6)
;   endif


        set BusInterfaceType = 5 ;;;;   pci 0x5
        set BusNumber = 0



adapterverify =+
    Debug-Output "clt after adapterverify: "
    Ifstr(i) $(DetectedCard) != TRUE
    Debug-Output "clt detectedcard != TRUE: "
        Goto skipoptions
    Endif
    Debug-Output "clt: Calling Param_VerifyCard"
    Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
    Ifstr(i) $($R0) == STATUS_SUCCESSFUL
        Debug-Output "clt: Param_VerifyCard succeeded"
        Goto skipoptions
    Endif
    Set from = adapteroptions
    Set to = skipoptions
    Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error: cannot get an error string."
        goto ShellCodeError
    endif
    set Error = $($R0)
    Goto Warning
skipoptions =+
    Debug-Output "clt after skipoptions: "
    ifint $(OldVersionExisted) == $(TRUE)
        ifstr(i) $(!NTN_InstallMode) == configure
                goto writeparameters
        endif
    endif
    StartWait
;;;;;;;clt  12/06/1996 ;;;begin ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;set VenID = 10EC
;set DevID = 8129
set VenID = 4332
set DevID = 33065
        Debug-Output "clt: Before getpciinf!!"
        Shell $(UtilityInf), GetPCIInformation, $(VenID) $(DevID)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "clt: getpciinformation shell code error!!"
                goto ShellCodeError
        endif

        ifstr(i) $($R0) == {}
              Debug-Output "clt: Can find the NET CARD after getpciinf!!"
              set Error = " Can find the Net Card !!"
              set CommonStatus = USER_CANCEL
              set from = end
              goto nonfatal
        endif

       set AdapterList = $($R0)


;;;;;;;clt  12/06/1996 ;;;end;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    ifint $(OldVersionExisted) == $(FALSE)
        Debug-Output "clt: enter if( oldverexisted == false) "

        ifstr(i) $(!NTN_InstallMode) == "install"
        Debug-Output "clt: enter if( NTN_InstallMode == install) "

                Ifstr(i) $(DoCopy) == "YES"
                   Debug-Output "clt: enter if( Docopy == YES) "
                    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
                    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Goto ShellCodeError
                    Else-Ifstr(i) $($R0) == STATUS_FAILED
                        Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                           goto ShellCodeError
                        endif
                        set Error = $($R0)
                        Goto fatal
                    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                        Goto successful
                    Endif
                    Set SrcDir = $($R1)
                Endif
                install "Install-Option"
                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                    set Error = $($R0)
                    goto fatal
                endif
        endif
       Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
                        $(ProductSoftwareName), +
                        $(ProductSoftwareName), +
                        $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
                        $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
                        $(NetEventDLL)
       Set OEM_ABANDON_SOFTWARE = TRUE
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       set KeyProduct      = $($R1)
       Set SoftNetRulesKey = $($R2)
       CloseRegKey $($R3)
       CloseRegKey $($R4)
       CloseRegKey $($R5)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Registry error: add software components"
        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)
        goto fatalregistry
       endif
       set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
       Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Registry error: add value list."
        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)
        goto fatalregistry
       endif
       set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                        {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                        {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
       Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
       endif
       set RegistryErrorIndex = $($R0)
       CloseRegKey $(KeyProduct)
       CloseRegKey $(SoftNetRulesKey)
       Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Resgitry error: add value list."
        goto fatalregistry
       endif
    endif
;;;;;;;clt  begin for loop ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
     Debug-Output "clt: begin forlistdo "
    ForListDo $(AdapterList)
        set BusNum = *($($),1)
        set DeviceNum = *($($),2)
        set FunctionNum = *($($),3)
                Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
                    $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
                ifstr $($R0) != "NO_ERROR"
                    set Error = $($R0)
                    goto fatal
                endif

                Debug-Output "clt: after isnetcardalreadyinstalled"

                ifstr(i) $($R1) != "YES"
                ;;;;;;;;;;;NO;begin;;;;;;;;;;;;;;;;;
                Debug-Output "clt: enter if (R1 != yes)"

    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
    ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "Cannot add hardware component"
                goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Registry error: add hardware component"
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
    endif
    set KeyParameters = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber = $($R4)
    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error"
                goto ShellCodeError
    endif
    CloseRegKey $($R1)
    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Resgitry error: add value list."
                CloseRegKey $(KeyParameters)
                CloseRegKey $(KeyAdapterRules)
                goto fatalregistry
    endif
    CloseRegKey $(KeyAdapterRules)
;;;;goto writeparameters
;;;writeparameters = +
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;;;clt 11/25/1996;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;        set SpeedValue1 = "auto"
;        set speed =  "auto"
;        set cltlist = {"auto", "10" ,"100"}
;
;
;    read-syms SpeedDlg$(!STF_LANGUAGE)
;    Debug-Output "clt before ui start inputDlg: "
;    SetHelpFile $(!STF_WINDOWSSYSPATH)"\"sample.hlp 10 20 10
;
;    ui start "InputDlg"
;    Debug-Output "clt after ui start inputDlg: "
;    ifstr(i) $(DLGEVENT) == "CONTINUE"
;                set speed    = $(ListItemsOut)
;    Debug-Output "clt Continue:"$(speed)
;                ui pop 1
;    else-ifstr(i) $(DLGEVENT) == "EXIT"
;;;;;;;          set CommonStatus = STATUS_USERCANCEL
;                Debug-Output "select speed cancel."
;                ui pop 1
;                goto end
;    else
;                ui pop 1
;                Debug-Output "Action: unknown. Bye."
;                goto end
;    endif


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    set NewValueList = {{EtherID,$(NoTitle),$(!REG_VT_SZ),$(EtherID)},+
                        {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
                        {EarlyTxThreshold,$(NoTitle),$(!REG_VT_DWORD),$(EarlyTxThreshold)},+
;{Speed,$(NoTitle),$(!REG_VT_SZ),$(speed)},+
                       {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
                       {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                       {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                       {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)},+
                       {MediaType,$(NoTitle),$(!REG_VT_DWORD),1}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
        Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
    endif
    CloseRegKey $(KeyParameters)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                Debug-Output "Registry error: Add value list"
                goto fatalregistry
    endif
                Debug-Output "clt: leave if (R1 != yes)"
                endif
                ;;;;;;NO end;;;;;;;;;;;;;;;;;;;;;;
         EndForListDo
     Debug-Output "clt:Endforlistdo "
;;;;;;;clt  end   for loop ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    EndWait
    goto successful

writeparameters = +
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
     Debug-Output "clt: begin writeparameters !"

;;;;clt 11/25/1996;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;        set SpeedValue1 = "auto"
;        set speed =  "auto"
;        set cltlist = {"auto", "10" ,"100"}
;
;
;    read-syms SpeedDlg$(!STF_LANGUAGE)
;    SetHelpFile $(!STF_WINDOWSSYSPATH)"\"sample.hlp 10 20 10
;    Debug-Output "clt before ui start inputDlg: "
;    ui start "InputDlg"
;    Debug-Output "clt after ui start inputDlg: "
;    ifstr(i) $(DLGEVENT) == "CONTINUE"
;                set speed    = $(ListItemsOut)
;    Debug-Output "clt Continue:"$(speed)
;                ui pop 1
;    else-ifstr(i) $(DLGEVENT) == "EXIT"
;;;;;;;          set CommonStatus = STATUS_USERCANCEL
;                Debug-Output "select speed cancel."
;                ui pop 1
;                goto end
;    else
;                ui pop 1
;                Debug-Output "Action: unknown. Bye."
;                goto end
;    endif


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    set NewValueList = {{EtherID,$(NoTitle),$(!REG_VT_SZ),$(EtherID)},+
                        {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
                        {EarlyTxThreshold,$(NoTitle),$(!REG_VT_DWORD),$(EarlyTxThreshold)},+
;                       {Speed,$(NoTitle),$(!REG_VT_SZ),$(speed)},+
                       {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
                       {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                       {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                       {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)},+
                       {MediaType,$(NoTitle),$(!REG_VT_DWORD),1}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
        Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
    endif
    CloseRegKey $(KeyParameters)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                Debug-Output "Registry error: Add value list"
                goto fatalregistry
    endif
     Debug-Output "clt:end write parameter !! "

;;;;;;;clt  end   for loop ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;


    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
                                $(ProductSoftwareName)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error"
                                goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                                goto fatalregistry
                endif
    else
                Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
                        $(ProductSoftwareName), $(!NTN_RegBase)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                                Debug-Output "ShellCode error"
                                goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                                goto fatalregistry
                endif
    endif
    goto end
UpgradeSoftware = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
        CloseRegKey $(KeyProduct)
    else
        goto fatalregistry
    endif
    goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "clt:ShellCode error: cannot get an error string."
        goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)



[Install-RSET]
    set STF_VITAL = ""

   AddSectionFilesToCopyList Files-RSET $(SrcDir) $(!STF_WINDOWSSYSPATH)

    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif

    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit

[Install-help]
    set STF_VITAL = ""

   AddSectionFilesToCopyList Files-help $(SrcDir) $(!STF_WINDOWSSYSPATH)

    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif

    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit

[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-RSET $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-inf $(SrcDir) $(!STF_WINDOWSSYSPATH)

   exit
[Source Media Descriptions]
;;   1 = "Realtek RTL8129 OEM Driver Disk" , TAGFILE = rtl8129.sys
   1 = "ATI AT2500v1 OEM Driver Disk"
     ; from disk a:\ or b:\
[Signature]
    FileType = MICROSOFT_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
[Files-Inf]
1,      oemsetnt.inf,    SIZE=50000,     RENAME=$(!UG_Filename)

[Files-RTL8129]
1,AT2500.SYS , SIZE=50000

[Files-help]
1,sample.hlp, SIZE=50000


[Files-RSET]
1,TRACER.DLL , SIZE=50000
[LanguagesSupported]
    ENG
[OptionsTextENG]
    RTL8129     = "AT-2500v1 PCI 10/100 Ethernet Adapter"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "AT-2500v1 PCI 10/100 Ethernet Card Setup"
ProductSoftwareDescription      = "AT-2500v1 PCI 10/100 Ethernet Adapter Driver"
ProductHardwareRTL8129Description        = "AT-2500v1 PCI 10/100 Ethernet Adapter"
ProductSoftwareTitle    = "AT-2500v1 PCI 10/100 Ethernet Adapter Driver"
ProductHardwareRTL8129Title      = "AT-2500v1 PCI 10/100 Ethernet Adapter"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;;[FileDependentDlgENG]
;;Caption        = "Input Ethernet ID"
;;DlgText        = "Please input adapter's Ethernet ID: "$(!LF)+
;;                 "For example:"$(!LF)+
;;                 "        Ethernet ID: 00 01 02 A3 B4 C5"$(!LF)$(!LF)+
;;                 "(This option is only required when you have more than "+
;;                 "one ATI AT2500v1 PCI LAN adapters on this computer. "+
;;                 "Select SKIP if only one adapter is installed on "+
;;                 "this computer.)"
;;Edit1Label  = "&Ethernet ID:"
;;Continue       = "&OK"
;;Exit           = "&Skip"
;;Help           = "&Help"
;;DlgType        = "Edit"
;;DlgTemplate    = "QUERY_COMPUTER_NAME"
;;EditTextLim    = 17
;;EditTextIn     = $(EtherID)
;;EditFocus      = "ALL"

[FileDependentDlgENG]
Caption        = "Input Network Address"
DlgText        = "Please input Network Address: "$(!LF)+
                 "For example:"$(!LF)+
                 "        Ethernet ID: 000102A3B4C5"$(!LF)$(!LF)+
                 "(This option is only required when you need to use"+
                 "some networking applications which need software"+
                 "programmable Network Address)"
Edit1Label  = "&Network Address :"
Continue       = "&OK"
Exit           = "&Skip"
Help           = "&Help"
DlgType        = "Edit"
DlgTemplate    = "QUERY_COMPUTER_NAME"
EditTextLim    = 17
EditTextIn     = $(NetworkAddress)
EditFocus      = "ALL"

;[SpeedDlgENG]
;    Caption        = "Select Line Speed"
;    DlgText        = "This netcard support (1) auto detect (2) 10 Mbps (3) 100Mbps."+
;                        " Please select one:"
;    Continue       = "OK"
;    Cancel         = "Cancel"
;    Help           = "&Help"
;    DlgType        = List
;    DlgTemplate    = "OEMSINGLESEL"
;    HelpContext    = 10
;    ListItemsIn  = $(cltlist)
;    ListItemsOut = $(SpeedValue1)
;;   ListItemsIn    = $(OemOptionTextList)
;;   ListItemsOut   = *($(OemOptionTextList),1)
[EarlyTxThresholdDlgENG]
Caption        = "Input Tx Early Threshold"
DlgText        = "Please input Early Tx Threshold: "$(!LF)+
                 "The value range from 0 to 3f in heximal"
Edit1Label  = "&EarlyTxThreshold:"
Continue       = "&OK"
Exit           = "&Skip"
Help           = "&Help"
DlgType        = "Edit"
DlgTemplate    = "QUERY_COMPUTER_NAME"
EditTextLim    = 2
EditTextIn     = $(EarlyTxThreshold)
EditFocus      = "ALL"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2026 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web2, load: 1.54