D-Link Support Publishing \NETWARE\NW312.TXT November 1996 D-Link PCI Family PCI Ethernet Adapter Installation for the NetWare Server 3.12 Driver Contents ÄÄÄÄÄÄÄÄ Introduction Requirements Minimum Skill Level Compatibility List Getting Started Introduction ÄÄÄÄÄÄÄÄÄÄÄÄ This installation assumes that the adapter is working properly. Getting Started will describe the installation instructions. Requirements ÄÄÄÄÄÄÄÄÄÄÄÄ A PCI compatible computer An ODI compatible network operating system A PCI Family Series Adapter A knowledge of basic DOS commands and editing text files Minimum Skill Level ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ A knowledge of basic DOS commands A knowledge of editing text files A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT) A knowledge of the network driver configuration being used Compatibility List ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Any PCI Family Ethernet Adapter For a Motherboard compatibility list please consult your local D-Link Branch Office Because this driver follows Novell ODI Driver Specification version 3.3, the NetWare version 4.10 NetWare server must be patched to work with this driver. The servers of NetWare version 4.11 and above do not need to be patched. The patching method is described as below: 1. Copy LOADER.EXE and LSWAP.EXE to the NetWare 4.10 server directory. 2. Execute LSWAP.EXE at MS-DOS prompt from server directory. Usage: LSWAP [loaderFilePath [serverFilePath]] Default loaderFilePath = C:\NWSERVER\LOADER.EXE Default serverFilePath = C:\NWSERVER\SERVER.EXE Getting Started ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Copy the DLKPCI.LAN file from the <PATH>\DLKPCI.lan directory into the subdirectory of your server. Type: >copy <PATH>\DLKPCI.lan \NW312 ; if NW312 is the server subdirectory ; <PATH> is the path where DLKPCI.lan resides. If the autoinstall was used <PATH>=\SRV312. Copy all provided NLM files into your server directory. Type: >copy <PATH>\*.NLM \NW312 Run SERVER.EXE on the server. Edit the AUTOEXEC.NCF file as follows: :load install Select <System Option> Select <Edit Autoexec.NCF file> Modify the server's AUTOEXEC.NCF as follows: load C:\NW312\NBI31X.NLM load C:\NW312\MSM.NLM load C:\NW312\ETHERTSM.NLM load C:\NW312\DLKPCI.LAN SLOT=?? bind ipx to DLKPCI net=xxxx ;xxxx is the network # ie. 33 Press Esc after editing. Select "Yes" to save. Select "Exit" to exit installation. Shut down the server and then turn it ON again. The driver is now installed and running.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.