NW311.TXT Driver File Contents (DE530CTP.EXE)

D-Link Support Publishing       \NETWARE\NW311.TXT              November 1996

		  D-Link PCI Family PCI  Ethernet PCI Adapter
	 Driver Installation for Novell NetWare version 3.11 Server

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     A PCI compatible computer
     Novell NetWare version 3.11 network operating system
     A PCI Family Series Adapter
     Knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Knowledge of basic DOS commands
     Knowledge of editing text files
     Knowledge of DOS bootup sequence (CONFIG.SYS and AUTOEXEC.BAT)
     Knowledge of the network driver configuration being used

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

     Under MS-DOS mode, run the installation program included in the
      released diskette to extract the Novell NetWare version 3.11 server 
      driver on the server.

     Make a note of the target path where the drivers are installed.

     Copy the DLKPCI.LAN from the target path into the subdirectory of
      your server.

     > Copy C:\<PATH>\DLKPCI.LAN C:\NWSERVER

      Note: C:\SRV311 if the default path of the driver installation
            program is used.

     Copy all supplied NLM files to your server directory:

     >Copy  C:\<PATH>\*.NLM  C:\NWSERVER

     Run SERVER.EXE from your server

     Edit AUTOEXEC.NCF file

     :load install
      Select <System Option>
      Select <Edit Autoexec.NCF file>

     Modify the server's AUTOEXEC.NCF as following.
		load c:\NWSERVER\patchman.nlm
		load c:\NWSERVER\lslenh.nlm
		load c:\NWSERVER\msm31x.nlm
		load c:\NWSERVER\ethertsm.nlm
		load c:\NWSERVER\DLKCPI.lan slot=??
		bind ipx to DLKPCI  net=xxxx

     Press  <ESC> Key when done editing
      Select "YES" to save
      Select "EXIT" to leave installation

     Reboot the Server again.  The Ethernet driver is now installed.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.37