1. DE530CTP.EXE Driver
2. LANMAN.TXT File Contents

LANMAN.TXT Driver File Contents (DE530CTP.EXE)

D-Link Support Publishing       \NDIS\LANMAN.TXT                November 1996

        D-Link PCI Family Ethernet Adapter Installation
                   for MS LAN Manager

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     A PCI compatible computer
     LAN Manager 2.x
     A PCI Family Series Adapter
     A knowledge of basic DOS\OS/2 commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic DOS\OS/2 commands
     A knowledge of editing text files
     A knowledge of DOS\OS/2 basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

    DOS Installation
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

    The MS LAN Manager provides a SETUP.EXE program in the setup diskette
    for specifying a driver for the Ethernet adapter.

    To install a driver for DOS (see OS/2 below), follow these steps:

     If you are installing LAN Manager for the first time, answer "Yes"
      when prompted for the importation of additional network drivers.
      This prompt appears right after completion of the workstation
      installation.

     If LAN Manager is already installed in your hard disk, select 
      "Add New Config" from the Configuration menu.  Then, select 
      "Other Driver".

     Insert the driver diskette in Drive A and follow the instructions on
      the screen.  The SETUP program will copy the necessary NDIS driver
      programs from the driver diskette into your hard disk; that is, into
      the LAN Manager directory. (PATH=C:\LANMAN.DOS, if install specify)

     After completion of SETUP, your CONFIG.SYS file will be modified to
      reflect the NDIS driver programs.

     Reboot your system to affect the changes.

    OS/2 Installation
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

    The MS LAN Manager provides a SETUP.EXE program on the setup diskette
    for installing a driver for the Ethernet adapter.

     Run SETUP.EXE from the LAN Manager diskettes

     For a first time installation, answer "Yes" when prompted for the
      installation of additional network drivers. This prompt appears
      after completion of the workstation installation.

     If LAN Manager is already installed in your hard disk, select 
      "Add New Config" from the Configuration menu.

     Select "Other Drivers".

     Insert the driver diskette in Drive A and follow the instructions on 
      the screen.

     After completion of SETUP, your CONFIG.SYS file will be modified to
      reflect modfications.

     Reboot your system to affect the changes.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.