;---------------------------------------------------------------------------------
; PROTOCOL.INI of D-Link PCI Ethernet Adapter
;---------------------------------------------------------------------------------
; Description :
; Drivername = DLKPCI$
;
; DATA_RATE = MB10 --> 10M bps
; MB100 --> 100M bps
; This parameter specifies the configuration of data rate of
; the network adapter.
; If DATA_RATE does not specified, it will auto detect
; the date rate.
;
; SLOT = 1
; This parameter specifies the slot number used for notifications.
; For PCI slot, you can specify from 1 to 16.
;
; SIA_MODE = AUTOSENSE --> Auto detect the media type
; TP --> Media type is UTP
; TP_FULL_DUPLEX --> Media type is UTP and Full-duplex
; BNC --> Media type is BNC
; This parameter specifies the connector type configuration of
; the network adapter card .
;------------------------------------------------------------------------------
DriverName = DLKPCI$
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.