****** U.S. Robotics Courier V.Everything V.92 update ****** Changes from V.90 firmware - X2 capabilities have been removed. - Added V.92 functionality. - Dial security accounts reduced to 80 from 100. ****************************************** ***** Automatic Firmware update ****** *** (Windows Operating Systems Only) *** ****************************************** - Browse to the folder where 3453V92.exe is located. - Double-click on the file to begin updating the firmware. - (Windows users only) When the update is complete, follow the insructions in the Windows.txt file. ************************************** ***** Manual Firmware update ***** ***** (All Operating Systems) ***** ************************************** To send the new code to your modem, all you need is a terminal program that can send files using the XMODEM protocol. Start your terminal program. Adjust the settings, if necessary, so you can send AT to your modem and get an OK response. Enter ATXMODEM. The modem should respond as follows: atxmodem Firmware Update --------------- Options: (1) Read firmware (2) Write firmware ESCape Exits > Select "2" to begin updating the code. The modem will respond with: Ready to receive firmware update Send the file to your modem using either the XMODEM-Checksum or XMODEM-CRC protocol. After the transfer is complete, you will see a *TRANSFER SUCCESSFUL* message. Press ESC. Modem will automatically reset. Firmware update is complete. - (Windows users only) When the update is complete, follow the instructions in the Windows.txt file.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.