[Identification]
OptionType = NetAdapter
[PlatformsSupported]
PCI
[Options]
USRCABLE
[DriverFilenameConstantsNDIS3]
NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\usrcable.sys"
ProductSoftwareImagePath = "%SystemRoot%\System32\drivers\usrcable.sys"
ProductSoftwareUpgradePath = "\SystemRoot\System32\drivers\usrcable.sys"
[FileConstants]
UtilityInf = "UTILITY.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
NetworkCardsKey = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"
Manufacturer = "3Com"
ProductMajorVersion = "1"
ProductMinorVersion = "0"
ProductReview = "1"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "USRCABLE"
NetRuleSoftwareType = "USRCABLESys ndisDriver USRCABLEDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """USRCABLESys"" yes no container"
NetRuleSoftwareClass = {"USRCABLEDriver basic"}
NetRuleSoftwareBindable = {"USRCABLEDriver USRCABLEAdapter non exclusive 100"}
ProductHardwareName = "USRCABLE"
NetRuleHardwareBindForm = " yes yes container"
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
FunctionTitle = "3Com HomeConnect Cable Modem TMI Setup"
ProductSoftwareDescription = "3Com HomeConnect Cable Modem TMI USRCABLE Driver"
ProductSoftwareTitle = "3Com HomeConnect Cable Modem TMI USRCABLE Driver"
GROUP_NAME = "3Com HomeConnect Cable Modem TMI"
NetRuleHardwareType = "USRCABLE USRCABLEAdapter"
NetRuleHardwareClass = {"USRCABLEAdapter basic"}
ProductHardware34952Title = "3Com HomeConnect Cable Modem TMI"
ProductHardware34952Description = "3Com HomeConnect Cable Modem TMI"
AdapterType = 5
CFIDList = {34952}
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
NT350VersionConstant = "3.50"
NT310VersionConstant = "3.10"
NT400VersionConstant = "(4.0)"
INF_PROCESSER = "I386"
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[PaceRegistry]
return
[InstallOption]
set CurrLang = $($0)
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
set CurrentVersionValue = ""
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt
Ifstr(i) $(KeyNt) != ""
GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue
Debug-Output "$(InfFile) : WinNT CurrentVersion ="$(CurrentVersionValue)
CloseRegKey $(KeyNt)
Endif
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
set NDIS_VER = NDIS3
else
set NDIS_VER = NDIS3
endif
read-syms DriverFilenameConstants$(NDIS_VER)
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant)
Debug-Output "$(InfFile) : Configureadapter"
set Error = "Windows NT v3.10 is not supported by this product"
goto fatal
endif
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
ifstr $(!STF_PLATFORM) == $(INF_PROCESSER)
set CommonStatus = STATUS_USERCANCEL
goto end
else-Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
else
set StartLabel = configureadapter
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
Debug-Output "$(InfFile) : =================================================="
Debug-Output "$(InfFile) : STF_CWDIR is: "$(!STF_CWDIR)
Debug-Output "$(InfFile) : STF_SRCDIR is: "$(!STF_SRCDIR)
Debug-Output "$(InfFile) : STF_LANGUAGE is: "$(!STF_LANGUAGE)
Debug-Output "$(InfFile) : Option is: "$(Option)
Debug-Output "$(InfFile) : !STF_NCN_InstallMode is:"$(!NTN_InstallMode)
Debug-Output "$(InfFile) : !STF_NCDETECT is: "$(!STF_NCDETECT)
Debug-Output "$(InfFile) : !STF_NCOPTION is: "$(!STF_NCOPTION)
Debug-Output "$(InfFile) : !STF_NCDETCARD is: "$(!STF_NCDETCARD)
Debug-Output "$(InfFile) : !STF_NCDETINFO is: "$(!STF_NCDETINFO)
Debug-Output "$(InfFile) : !STF_GUI_UNATTENDED is: "$(!STF_GUI_UNATTENDED)
Debug-Output "$(InfFile) : !STF_BusType is $(!STF_BUSTYPE)"
Debug-Output "$(InfFile) : !STF_BusTypeList is $(!STF_BUSTYPELIST)"
Debug-Output "$(InfFile) : =================================================="
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
Debug-Output "$(InfFile) : Installadapter"
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(!REG_KEY_READ) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
set OldVersionExisted = $(TRUE)
endif
Endif
Goto adapteroptions
configureadapter = +
Debug-Output "$(InfFile) : Configureadapter"
set Error = "Cannot configure the software component"
goto fatal
adapteroptions = +
Debug-Output "$(InfFile) : Adapteroptions"
set from = adapteroptions
ifstr(i) $(!NTN_InstallMode) == configure
goto updateparameters
endif
installproduct =+
Debug-Output "$(InfFile) : installproduct"
StartWait
set AdapterList = $($R1)
ifint $(OldVersionExisted) == $(FALSE)
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_READ) KeyNt
CloseRegKey $(KeyNt)
Ifstr(i) $(KeyNt) == ""
Debug-Output "$(InfFile) : AddSoftwareComponent"
Debug-Output "$(InfFile) : --> $(Manufacturer)"
Debug-Output "$(InfFile) : --> $(ProductSoftwareName)"
Debug-Output "$(InfFile) : --> $(ProductSoftwareTitle)"
Debug-Output "$(InfFile) : --> $(STF_CONTEXTINFNAME)"
Debug-Output "$(InfFile) : --> $(ProductSoftwareImagePath)"
Debug-Output "$(InfFile) : --> $(NetEventDLL)"
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalregistry
endif
Set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{Review,$(NoTitle),$(!REG_VT_DWORD),$(ProductReview)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
goto fatalregistry
endif
endif
Debug-Output "$(InfFile) : About to look for 3Com PCI Cards"
set TargetVersion = *($(CurrentVersionValue),4)
Debug-Output "$(InfFile) : Current Version:"$(TargetVersion)
ifstr $(TargetVersion) == $(NT350VersionConstant)
Debug-Output "Running on WindowsNT 3.50"
set Version350 = $(TRUE)
else
Debug-Output "Running on WindowsNT 3.51 or higher"
set Version350 = $(FALSE)
endif
ifint $(Version350) == $(TRUE)
Debug-Output "Running on WindowsNT v3.50, Not using PCI Detection!!!"
else
Debug-Output "$(InfFile) : Running 3.51 or higher using PCI Dectection"
set NTDetected = $(TRUE)
set Vendor = 4793
set CFIDList = $(CFIDList)
Debug-Output "$(InfFile) : VendorID = $(Vendor)"
Debug-Output "$(InfFile) : CFIDList = $(CFIDList)"
set AdapterList = {}
ForListDo $(CFIDList)
set-div CFID = $($) 1
set DeviceID = $($)
Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CFID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ForListDo $($R0)
set AdapterList = >($(AdapterList), {*($($),1), *($($),2), $(DeviceID)})
EndForListDo
EndForListDo
ifstr(i) $(AdapterList) == {}
set Error = $(CANNOT_FIND_ANY_CARD)
set CommonStatus = USER_CANCEL
set from = end
goto nonfatal
endif
endif
Debug-Output "$(InfFile) : Adapterlist = $(AdatperList)"
ForListDo $(AdapterList)
Set InstallCard = "YES"
ifint $(NTDetected) == $(TRUE)
set DetectedBusNum = *($($),1)
set DetectedSlotNum = *($($),2)
set DeviceID = *($($),3)
Debug-Output "$(InfFile) : DetectedBusNumber = $(DetectedBusNum)"
Debug-Output "$(InfFile) : DetectedSlotNum = $(DetectedSlotNum)"
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(ProductHardware$(DeviceID)Description), $(ProductHardwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) == "YES"
set InstallCard = "NO"
endif
endif
ifstr(i) $(InstallCard) == "NO"
Debug-Output "$(InfFile) : Card Already at $(DetectedBusNum):$(DetectedSlotNum) already installed!"
set Error = "An adapter at $(DetectedBusNum):$(DetectedSlotNum) is already installed!"
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
else
Debug-Output "$(InfFile) : Installing Card at $(DetectedBusNum):$(DetectedSlotNum)!"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(DeviceID)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(DeviceID)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set BusTypeNum = 5
ifstr(i) $(DeviceID) == "36944"
set CardType = 0
else-ifstr(i) $(DeviceID) == "36945"
set CardType = 0
else-ifstr(i) $(DeviceID) == "36949"
set CardType = 0
else
set CardType = 2
endif
ifint $(NTDetected) == $(TRUE)
set BusNumber = $(DetectedBusNum)
set SlotNum = $(DetectedSlotNum)
set BusInterfaceType = $(BusTypeNum)
set WakeOnLan = YES
set WakeOnLink = NO
set FlowControl = YES
Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
Set NewValueList = {+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{Slot,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)},+
{Parameter1,$(NoTitle),$(!REG_VT_DWORD),0},+
{Parameter2,$(NoTitle),$(!REG_VT_DWORD),0},+
{Parameter3,$(NoTitle),$(!REG_VT_DWORD),0},+
{Parameter4,$(NoTitle),$(!REG_VT_DWORD),0},+
{WakeOnMagic,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLan)},+
{WakeOnLink,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLink)},+
{FlowControl,$(NoTitle),$(!REG_VT_SZ),$(FlowControl)},+
}
Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
Set NewValueList = { {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)} }
Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
else
Set NewValueList = {+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
}
Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
Set NewValueList = {+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{CardType,$(NoTitle),$(!REG_VT_DWORD),$(CardType)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
}
Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf), AddDefaultNetcardParameters, $(HardParameterKey)
endif
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output "$(InfFile) : HardwareRuleKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
CloseRegKey $(HardParameterKey)
endif
EndForListDo
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyService
Ifstr $(KeyService) != ""
SetRegValue $(KeyService) {ImagePath,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareUpgradePath)}
else
goto fatalregistry
endif
CloseRegKey $(KeyService)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\EventLog\System\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyEventLog
Ifstr $(KeyEventLog) != ""
SetRegValue $(KeyEventLog) {EventMessageFile,$(NoTitle),$(!REG_VT_SZ),$(NetEventDLL)}
else
goto fatalregistry
endif
CloseRegKey $(KeyEventLog)
EndWait
goto successful
updateparameters =+
Debug-Output "$(InfFile) : Updateparameters"
set HardParameterKey = $($R3)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(KeyParameters)
goto successful
bindingadapter =+
Debug-Output "$(InfFile) : bindingadapter"
Return STATUS_SUCCESSFUL
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Debug-Output "$(InfFile) : removeadapter"
Debug-Output "$(InfFile) : ----> $(ProductKeyName), $(!NTN_RegBase)"
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
AddFileToDeleteList $(!STF_WINDOWSSYSPATH)"\DRIVERS\usrcable.sys"
else
AddFileToDeleteList $(!STF_WINDOWSSYSPATH)"\DRIVERS\usrcable.sys"
endif
goto end
UpgradeSoftware = +
Debug-Output "$(InfFile) : UpdateSoftware"
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(!REG_KEY_ALL_ACCESS) KeyProduct
Ifstr $(KeyProduct) != ""
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
install "Install-INF"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)}
SetRegValue $(KeyProduct) {Review,$(NoTitle),$(!REG_VT_DWORD),$(ProductReview)}
CloseRegKey $(KeyProduct)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyService
Ifstr $(KeyService) != ""
SetRegValue $(KeyService) {ImagePath,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareUpgradePath)}
else
goto fatalregistry
endif
CloseRegKey $(KeyService)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\EventLog\System\"$(ProductHardwareName) $(!REG_KEY_ALL_ACCESS) KeyEventLog
Ifstr $(KeyEventLog) != ""
SetRegValue $(KeyEventLog) {EventMessageFile,$(NoTitle),$(!REG_VT_SZ),$(NetEventDLL)}
else
goto fatalregistry
endif
CloseRegKey $(KeyEventLog)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase) $(!REG_KEY_ALL_ACCESS) KeyNt
set LoopList = {1,2,3,4,5,6,7,8}
set WinNTList = {WinNT,$(NoTitle),$(!REG_VT_SZ),YES}
Set NewValueList = {{WakeOnMagic,$(NoTitle),$(!REG_VT_SZ),"YES"},+
{WakeOnLink,$(NoTitle),$(!REG_VT_SZ),"NO"},+
{FlowControl,$(NoTitle),$(!REG_VT_SZ),"YES"}}
ForListDo $(LoopList)
OpenRegKey $(KeyNt) "" $(ProductHardwareName)$($)"\Parameters" $(!REG_KEY_ALL_ACCESS) TestKey
ifstr $(TestKey) != $(KeyNull)
Shell $(UtilityInf), AddValueList, $(TestKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
OpenRegKey $(!REG_H_LOCAL) "" $(NetworkCardsKey)$($)"\NetRules" $(!REG_KEY_ALL_ACCESS) NetCardKey
ifstr $(NetCardKey) != $(KeyNull)
SetRegValue $(NetCardKey) {"InfName",$(NoTitle),$(!REG_VT_SZ),$(!UG_Filename)}
CloseRegKey $(NetCardKey)
endif
CloseRegKey $(TestKey)
endif
EndForListDo
else
goto fatalregistry
endif
goto end
successful = +
Debug-Output "$(InfFile) : Successful"
goto end
abandon = +
Debug-Output "$(InfFile) : Abandon"
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Debug-Output "$(InfFile) : warning"
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Debug-Output "$(InfFile) : nonfatalinfo"
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Debug-Output "$(InfFile) : nonfatal"
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
Debug-Output "$(InfFile) : nonfatalmsg"
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "RemoveAdapter"
endif
fatalregistry = +
Debug-Output "$(InfFile) : fatalregistry"
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fatal = +
Debug-Output "$(InfFile) : fatal"
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
ifint $($ShellCode) == $(!SHELL_CODE_NO_SUCH_INF)
Debug-Output "$(InfFile) : ShellCodeError - SHELL_CODE_NO_SUCH_INF"
else-ifint $($ShellCode) == $(!SHELL_CODE_NO_SUCH_SECTION)
Debug-Output "$(InfFile) : ShellCodeError - SHELL_CODE_NO_SUCH_SECTION"
else
Debug-Output "$(InfFile) : ShellCodeError - SHELL_CODE_ERROR"
endif
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
Debug-Output "$(InfFile) : Setfailed"
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[Install-Option]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
Debug-Output $(InfName)"Adding files: Files-$(NDIS_VER), SrcDir=$(SrcDir)"
AddSectionFilesToCopyList Files-$(NDIS_VER) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Install-INF]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Source Media Descriptions]
1 = "Windows NT Setup CD"
2 = "3Com HomeConnect Cable Modem TMI CD", TAGFILE = winnt\3CDISK1
[ProductType]
STF_PRODUCT = Winnt
[Files-Inf]
2, oemsetnt.inf,SIZE=29357, RENAME=$(!UG_Filename)
[Files-NDIS3]
2,usrcable.SYS
[Files-NDIS4]
2,usrcable.SYS
[LanguagesSupported]
ENG
[OptionsTextENG]
USRCABLE = "3Com HomeConnect Cable Modem TMI"
[FileConstantsENG]
ProCaption = "Windows NT NIC Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
ConnectionList = ^(ConnectionChoices, 1)
ConnectionValues = ^(ConnectionChoices, 2)
NoList = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle = "Error: "$(Function$(Option)Title)
ShellCodeErrorText = "Shell Code Error."
CANNOT_FIND_ANY_CARD = "Network card is not present in the system"
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.