OEMSETUP.INF Driver File Contents (EJTCBMCD.EXE)

;******************************************************************************
; OEMSETUP.INF --- IBM Installation File
; (C) Copyright IBM Corporation 1998.  All Rights Reserved
;
; Windows for Workgroups 3.11
; IBM LAN Server 4.0 DOS
;------------------------------------------------------------------------------
[data]
type=network
version="3.11.100"

[disks]
1=., "IBM 10/100 EtherJet CardBus Adapter Network Drivers Disk", disk 1

[netcard]
IBMMAC="IBM 10/100 EtherJet CardBus NDIS 2.01 Real Mode", 0, NDIS, Ethernet, REAL, IBMMAC_INST, IBMMAC_INI
IBM$ODI="IBM 10/100 EtherJet CardBus ODI for Netware", 0, NDIS, Ethernet, 0x04, IBMODI_INST, IBMODI_INI

[IBMODI_INST]
mlid=ibmcodi.com

[IBMODI_INI]

[IBMMAC_INST]
netdir=1:ibmcndis.exe
device=ibmcndis.exe, @netdir\ibmcndis.exe

[IBMMAC_INI]
DriverName=IBM$
param = MEMORY, "Adapter memory address", hex, "0xC000,0xE800,0x200", 0xD200, 2
param = IOADDRESS, "Adapter IO address", hex, "0x100,0xFF80,0x80", 0xF500, 2
param = MODE, "Adapter address mode", enum, "Memory,MEMORY,IO,IO", MEMORY, 2
param = IRQ, "Adapter IRQ number", int, "3,15,1", 11, 2
param = SOCKET, "CardBus socket", int, "1,4,1", 1, 2
param = NOCHECK, "Disable resource checking", keyonly,,,2
param = VERBOSE, "Enable verbose messages", keyonly,,,2
param = NOPOLL, "Disable driver polling", keyonly,,,2
param = RXBUFFERSIZE, "Receive buffer size (in packets)", int, "1,30,1", 15, 2
param = TXBUFFERSIZE, "Transmit buffer size (in packets)", int, "1,10,1", 2, 2
param = NOBURST, "Disable burst mode", keyonly,,,2
param = LINESPEED, "Force line speed", enum, "100 Mbps,100,10 Mbps, 10", 100, 2
param = LINEMODE, "Force line mode", enum, "Half duplex,HALF,Full duplex,FULL", HALF, 2
param = PCIIRQ, "Force PCI style IRQ", keyonly,,,2
param = ISAIRQ, "Force ISA style IRQ", keyonly,,,2
param = NOLED, "Turn LEDs off", keyonly,,,2
param = LINKDISABLE, "Disable link integrity", keyonly,,,2
param = LATENCY, "Latency timer", int, "0,255,1", 32, 2
param = NOWRITEPOST, "Disable write posting", keyonly,,,2
param = CACHE, "Cache line size", enum, "0,0,8,8,16,16,32,32", 8, 2
param = NOPREFETCH, "Disable bridge pre-fetching", keyonly,,,2



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.92