#
| README file for
|
| ELSA UTILS
|
| Copyright (c) 1993-98 ELSA AG, Aachen (Germany)
|
| ELSA AG Internet : http://www.elsa.de
| Sonnenweg 11 LocalWeb : +49-(0)241-938800
| D-52070 Aachen
|
| ELSA Inc. Internet : http://www.elsa.com
| 2231 Calle De Luna
| Santa Clara, CA 95054
| USA
|
| ELSA Asia Inc. Internet : http://www.elsa.com
| 7F-11, No. 188, Sec. 5
| Nanking East Road
| Taipei 105
| Taiwan, R. O. C.
|
| ELSA Japan Inc. Internet : http://www.elsa.com
| Mita Suzuki Building 3F
| 5-20-14 Shiba, Minato-ku
| Tokyo 108-0014
| Japan
|
| 10/27/98
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Table of Contents
1. Overview
2. Contents
3. Usage
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1. Overview:
This file contains notes and changes to the utilities for
the ISDN drivers.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2. Files:
README.TXT This file
LIESMICH.TXT German version of this README.TXT
ISDNMON.EXE ELSA ISDNmonitor for Windows 95 and NT
CONNTEST.EXE ELSA connection tester
ELSADEBG.EXE ELSA debug tool
ISDNCONF.EXE cahanges D-channen protokol
- - - - - - - - - - - - - - - - - - - - - - - -
3. Program description
3.1 ISDNMON
The ELSA ISDNmonitor runs with Windows 95 and NT.
The main window shows the following information:
- B-Channels (B1 and B2)
Con (Yellow LED):
Off = B-Channel not active
Partial = B-Channel requested
On = B-Channel active (charged!)
Tx (Red LED):
Off = No Data sent
On = Data sent
Rx (Red LED):
Off = No Data received
On = Data received
- S0 Interface
S0 Activation (Green LED):
Off = S0 Bus active
On = S0 Bus inactive
TEI (Green LED):
Off = No TEI
On = Got TEI
L2 (Green LED):
Off = D-Channel not active
On = D-Channel active
In the menu topic "Info" you will find entries called
"About" and "General Info". In the menu topic "Options" you
will find the entrie "On Top". With "On Top" you can
tell ISDNmonitor always to stay on top of all other windows.
"General Info" gives you further information about your CAPI,
your driver, your hardware and your ISDNmonitor. If you are
using an US CAPI-Driver you will find another entry called
"US Info".
The value of "On Top" and the window position of the ISDNmonitor
is saved when the ISDNmonitor is terminated and restored on the
next activation.
- - - - - - - - - - - - - - - - - - - - - - - -
Notes:
The ELSA ISDNmonitor for Windows 95 and NT runs only with the
ELSA CAPI 2.0 Driver Ver. 2.14 or higher.
With Windows 95 the ACOTEC CAPI Subsystem has to be installed.
- - - - - - - - - - - - - - - - - - - - - - - -
3.2 CONNTEST
The ELSA Conntester runs with Windows 95, Windows NT and OS/2.
The main window shows the following information:
While executing the program you will be asked to enter your own
calling-number. After entering the calling-number, Conntest starts
testing. Then the program builds up a connection to itself. If a
successful connection was made the program starts sending data.
After sending the last datablock, the programs disconntects. While
the program is making some tests, you are able to follow each test
on the screen. There is a checklist on which you are able to see if
the test was successful or not. If an error occurs, then the programs
stops executing and disconnects. Then you can get some useful tips
from the program for solving the present problems.
While running CONNTEST.EXE the program makes a CAPI-Trace ( only on a
writeable media) called CONNTEST.LOG located on the path of
CONNTEST.EXE .
- - - - - - - - - - - - - - - - - - - - - - - -
Notes:
The ELSA Conntester for Windows 95, Windows NT and OS/2 runs only
with the ELSA CAPI 2.0.
While executing CONNTEST.EXE the program makes a CAPI-Trace to a file
called CONNTEST.LOG. But if you want to start the prgram from a not
writeable media, then no CONNTEST.LOG could be generated. But if you
want to generate a CONNTEST.LOG-file then copy CONNTEST.EXE to your
harddisk and execute CONNTEST.EXE once again.
- - - - - - - - - - - - - - - - - - - - - - - -
3.3 ELSADEBG
Debugtool to protocol CAPI-messages.
ATTENTION: this tool may affect timing problems
in your application. It should only be started
if you are asked to by a supporter.
- - - - - - - - - - - - - - - - - - - - - - - -
3.4 ISDNCONF
changes the d-channel protocol. Standard is
Euro-ISDN (DSS1).
- - - - - - - - - - - - - - - - - - - - - - - -
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.