ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Compex ENET32-VL Ethernet Network Adapter º
º (C) Copyright PDS, 1995. All Rights Reserved. º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
1) INSTALLATION GUIDE
=====================
The tar image of the distribution floppy is in the compressed file
"disk01.exe". On a DOS machine, run the file "disk01.exe" to uncompress
it to "disk.01".
On a SCO UNIX machine, follow the steps below to install the driver.
1. Use the command 'doscp <DEVICE NAME>:sco/disk.01 .' to copy the tar
image into the current directory. The <DEVICE NAME> is defined below.
where <DEVICE NAME> is
/dev/fd048ds9 -- Drive A, 360K (5.25)
/dev/fd096ds15 -- Drive A, 1.2 MB (5.25)
/dev/fd0135ds9 -- Drive A, 720K (3.5)
/dev/fd0135ds18 -- Drive A, 1.44 MB (3.5)
/dev/fd048ds9 -- Drive B, 360K (5.25)
/dev/fd096ds15 -- Drive B, 1.2 MB (5.25)
/dev/fd0135ds9 -- Drive B, 720K (3.5)
/dev/fd0135ds18 -- Drive B, 1.44 MB (3.5)
Example: To copy the file DISK.01 from the SCO directory in the DOS
formatted driver diskette in a 1.44MB Drive A to the current
directory in SCO Unix,
doscp /dev/fd0135ds18:sco/disk.01 .
2. Make a floppy distribution disk
a) Format a blank diskette (SCO UNIX format)
format -nif 2 <DEVICE NAME>
Example: To format a 1.44MB diskette in Drive A,
format -nif 2 /dev/fd0135ds18
b) Extract the DISK.01 image to the blank diskette by using 'dd' command.
dd if=disk.01 of=<DEVICE NAME> bs=<DEVICE SECTORS>
where <DEVICE NAME> is defined above.
<DEVICE SECTORS> is '9k', '15k', or '18k' depending on
the drive type. Use '9k' for a 360k or 720k diskette
'15k' for a 1.2MB diskette
'18k' for a 1.44MB diskette
Example: To extract the DISK.01 image to a 1.44MB diskette in Drive A,
dd if=disk.01 of=/dev/fd0135ds18 bs=18k
3. Install and Configure the driver
a) Install the driver by using the 'custom' utility
custom
b) Configure the driver
mkdev pnt
c) Configure the TCP/IP protocol stack to use the driver
mkdev tcp
d) Reboot the system to start using the driver.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.