1. 30kit102.zip Driver
2. PWLAN.TXT File Contents

PWLAN.TXT Driver File Contents (30kit102.zip)

		 Digital Equipment Corporation
		 Power Lan driver Installation
		 =============================


To install Digital's adapter with Power Lan system, user
can use 3 different methods as following:

      A) Install Power Lan driver with Digital's adapter

      B) Install Digital's DOS/ODI drivers for Power Lan

      C) Install Digital's Packet drivers for Power Lan


A) Install Power Lan Driver with Digital's adapter
   ===============================================

   To install Power Lan driver with Digital's adapter

   1.) Use Power Lan install program, and select "NE2000" item.

   2.) Change Iobase and IRQ setting by Digital's 1Step setup program
       and using the same port at NXNE2000 command line parameter:
       /lp:Iobase /li:IRQ

   Example  -----  PLSTART.BAT

       if %PLTREE%. == . set PLTREE=C:\PL
       REM
       REM - - - - - - - - - - - - - - - - - - Start NETBIOS - - - - - - - - - - - -
       REM
       %PLTREE%\PROGRAMS\nxne2000  /ln:0 /ses:14 /nam:17 /lp:300 /li:3
       REM


B) Install Digital's DOS/ODI driver for Power Lan
   =============================================

   To install Digital's DOS/ODI driver at Power Lan system:

   1.) Copy Digital's DOS/ODI driver "DE305.COM" from A:\NETWARE\ODI\DOSODI
       to C:\PL\PROGRAMS

   2.) Copy Novell's driver "LSL.COM" from A:\NETWARE to C:\PL\PROGRAMS

   3.) Create NET.CFG file as following example at C:\PL\PROGRAMS

   4.) Use Power Lan install program, and select "ODI" item,
       then add "LSL.COM" and "DE305.COM" before NXODI.EXE
       at C:\PL\ADMIN\SYS\PLSTART.BAT's "start NETBIOS" section


   Example  -----  PLSTART.BAT

       if %PLTREE%. == . set PLTREE=C:\PL
       REM
       REM - - - - - - - - - - - - - - - - - - Start NETBIOS - - - - - - - - - - - -
       REM
       LSL
       %PLTREE%\DE305		   ------> Digital's MPX2 DOS/ODI driver
       %PLTREE%\PROGRAMS\nxodi	/ln:0 /ses:14 /nam:17
       REM

   Example  -----  NET.CFG

       Link Driver DE305
	      Frame ETHERNET_II
	      Protocol IPX  8137 ETHERNET_II
	      Port 300
	      INT 3



C) Install Digital's Packet driver for Power Lan
   =============================================

   To install Digital packet driver at Power Lan system:

   1.) Copy Digital's packet driver "DE305.COM" from A:\PKTDRV to
       C:\PL\PROGRAMS

   2.) Use Power Lan install program, and select "NXPACKET" item,
       then add Digital's packet driver "DE305.COM" before NXPACKET.EXE
       at C:\PL\ADMIN\SYS\PLSTART.BAT's "start NETBIOS" section


   Example  -----  PLSTART.BAT

       if %PLTREE%. == . set PLTREE=C:\PL
       REM
       REM - - - - - - - - - - - - - - - - - - Start NETBIOS - - - - - - - - - - - -
       REM
       %PLTREE%\DE305 0x60	     ------> Digital's packet driver
       %PLTREE%\PROGRAMS\nxpacket  /ln:0 /ses:14 /nam:17 /li:0x60



-- THE END --