Digital Equipment Corporation SETUP305 Hardware configuration program ======================================= Copyright (C) 1996 Digital Equipment Corporation. All rights reserved. SETUP305 is DE305 hardware configuration program which can be used at batch file to change DE305's hardware setting permanently. A) Command Line Syntax: ==================== SETUP305 to configure the adaptor with the file SETUP305.DAT. SETUP305 ? to show the syntax description B) Syntax of Configuration File SETUP305.DAT ========================================= {TestOnly} or {CardConfigMode[,]IOBase[,]IRQ[,]BootRomAddr[,]MediumType[,]Duplex} where TestOnly= 'T' or 't' for test only, i.e. test without modifying the card configuration; CardConfigMode= 'P' or 'p' for PnP mode, 'N' or 'n' for Non-PnP mode; IOBase= 200h,220h,240h,260h,280h,2a0h,2c0h,2e0h, 300h,320h,340h,360h,380h,3a0h,3c0h,or 3e0h; IRQ= 3,4,5,9,a,b,c,or f; BROMAddr= c000,c400,c800,cc00,d000,d400,d800,dc00; 0000 for disabling the boot ROM; MediumType= 'A' or 'a' for auto detect (twisted-pair or BNC), 'I' or 'i' for AUI; Duplex= 'F' or 'f' for full duplex, 'H' or 'h' for half duplex. Examples: Example 1: p,280,a,dc00,A,f set DE305 to PnP mode, Iobase=280h, Irq=10, BootRomAddress=DC000h, MediaType=AUTO, Full Duplex mode Example 2: N 320 5 0000 i H set DE305 to Jumpless(NE2000) mode, Iobase=320h, Irq=5, BootRom disable MediaType=AUI, Half Duplex mode Example 3: t Just test adapter with current configuration C) Return Code of test result ========================== 00 test/configure OK 01 can't open configuration file 02 syntax error in configuration file 03 can't find LAN card 04 RAM error ----- EndDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.