[Version] Signature="$CHICAGO$" Provider=%S_Provider% DriverVer=02/08/2002,1.51.0.0 ; the following is needed for WHQL certification, choose an appropriate cat file name ;CatalogFile=sbigusbi.cat Class=USB ;****************************************************************************** ; Manufacturer section ;------------------------------------------------------------------------------ [Manufacturer] %S_Mfg%=_Devices ;****************************************************************************** ; Device section ;------------------------------------------------------------------------------ [_Devices] %S_DeviceDesc%=_Install1, USB\VID_0D97&PID_0101 %S_DeviceDesc%=_Install1, USB\VID_0D97&PID_0201 ;****************************************************************************** ; Install section ( Device1 ) ;------------------------------------------------------------------------------ ; driver-specific, Win98 [_Install1] CopyFiles=_CopyFiles_sys AddReg=_AddReg_SW1, _AddReg_98, _Parameters1_98 ; device-specific, Win98 [_Install1.HW] AddReg=_AddReg_HW1 ; driver-specific, Win2000 [_Install1.NTx86] CopyFiles=_CopyFiles_sys AddReg=_AddReg_SW1, _Parameters1_NT ; service-install, Win2000 [_Install1.NTx86.Services] AddService = %S_DriverName%, 0x00000002, _NT_AddService, _NT_EventLog ; device-specific, Win2000 [_Install1.NTx86.HW] AddReg=_AddReg_HW1 ;****************************************************************************** ; NT Service sections (Win2000/XP only) ;------------------------------------------------------------------------------ [_NT_AddService] DisplayName = %S_ServiceDisplayName% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %10%\System32\Drivers\%S_DriverName%.sys [_NT_EventLog] AddReg=_NT_EventLog_AddReg [_NT_EventLog_AddReg] HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\%S_DriverName%.sys" HKR,,TypesSupported, 0x00010001,7 ;****************************************************************************** ; Registry sections ( Device1 ) ;------------------------------------------------------------------------------ [_AddReg_98] ; required standard entries HKR,,NTMPDriver,,%S_DriverName%.sys HKR,,DevLoader,,*ntkern [_AddReg_SW1] ; create registry key used to store configuration parameters HKLM,"%S_ConfigPath%",,, HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",,, [_AddReg_HW1] ; Create a link to the configuration key. This is absolute required! HKR,,USBIO_ConfigurationPath,,\Registry\Machine\%S_ConfigPath%\%S_DeviceConfigPath1% ; ; ### modify here ### ; Enable the next line to create an additional private user interface for your device. ; This is strongly recommended if you ship the driver together with a product. ; DO NOT USE an existing GUID. Generate a new one instead ! ; Use guidgen.exe to generate a new GUID, copy-paste it into the following line. ;HKR,,USBIO_UserInterfaceGuid,,"{????????-????-????-????-????????????}" ; parameters used on Windows 98, Windows ME [_Parameters1_98] ; Set the default behaviour of the driver for Windows 98 and Windows ME. ; For a description of the parameters, refer to the USBIO Reference Manual. HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",PowerStateOnOpen,0x00010001, 0 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",PowerStateOnClose,0x00010001, 0 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MinPowerStateUsed,0x00010001, 3 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MinPowerStateUnused,0x00010001, 3 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",EnableRemoteWakeup,0x00010001, 1 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",AbortPipesOnPowerDown,0x00010001, 1 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",UnconfigureOnClose,0x00010001, 1 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",ResetDeviceOnClose,0x00010001, 0 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MaxIsoPackets,0x00010001, 64 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",ShortTransferOk,0x00010001, 1 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",RequestTimeout,0x00010001, 1000 ; parameters used on Windows 2000 and Windows XP [_Parameters1_NT] ; Set the default behaviour of the driver for Windows 2000 and Windows XP ; For a description of the parameters, refer to the USBIO Reference Manual. HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",PowerStateOnOpen,0x00010001, 0 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",PowerStateOnClose,0x00010001, 0 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MinPowerStateUsed,0x00010001, 3 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MinPowerStateUnused,0x00010001, 3 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",EnableRemoteWakeup,0x00010001, 1 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",AbortPipesOnPowerDown,0x00010001, 1 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",UnconfigureOnClose,0x00010001, 1 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",ResetDeviceOnClose,0x00010001, 0 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MaxIsoPackets,0x00010001, 64 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",ShortTransferOk,0x00010001, 1 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",RequestTimeout,0x00010001, 1000 HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",SuppressPnPRemoveDlg,0x00010001, 1 ;****************************************************************************** ; Registry sections ( Device2 ) ; may be repeated to support more than one device ;------------------------------------------------------------------------------ ; ... ;****************************************************************************** ; Copy Files section ;------------------------------------------------------------------------------ [_CopyFiles_sys] ; Specify the correct file name of the driver binary. sbigusbi.sys ;****************************************************************************** ; Options ;------------------------------------------------------------------------------ [ControlFlags] ; Advanced options can be specified here. ; For details, refer to the Windows 2000 DDK. ;****************************************************************************** ; Destination Directories ;------------------------------------------------------------------------------ [DestinationDirs] DefaultDestDir = 11 ; SYSTEM directory _CopyFiles_sys = 10,System32\Drivers ;****************************************************************************** ; Disk Layout ;------------------------------------------------------------------------------ ;[SourceDisksNames] ;1=%S_DiskName%,, ; ;[SourceDisksFiles] ; Specify the correct file name of the driver binary. ;sbigusbi.sys ;****************************************************************************** ; Text Strings ;------------------------------------------------------------------------------ [Strings] ; provider name S_Provider="SBIG" ; manufacturer name S_Mfg="SBIG" ; device class display name, shown in Device Manager S_DeviceClassDisplayName="USB" ; device description ; *** The following line has been generated by USBIO Installation Wizard. *** S_DeviceDesc="SBIG Alt USB Camera" ; disk name ;S_DiskName="SBIG USBI Driver Disk" ; file name of driver executable S_DriverName="sbigusbi" ; service display name S_ServiceDisplayName="SBIG Alt USB Driver (sbigusbi.sys)" ; ; configuration registry path (where the registry parameters will be located) ; IMPORTANT: MUST BE under SYSTEM\CurrentControlSet\Services ! ; The string should be in the format ; SYSTEM\CurrentControlSet\Services\<DriverName> ; S_ConfigPath="SYSTEM\CurrentControlSet\Services\sbigusbi" ; device-specific configuration registry path S_DeviceConfigPath1="Parameters"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.