[Version]
Signature="$CHICAGO$"
Provider=%S_Provider%
DriverVer=02/08/2002,1.51.0.0
; the following is needed for WHQL certification, choose an appropriate cat file name
;CatalogFile=sbigusbi.cat
Class=USB
;******************************************************************************
; Manufacturer section
;------------------------------------------------------------------------------
[Manufacturer]
%S_Mfg%=_Devices
;******************************************************************************
; Device section
;------------------------------------------------------------------------------
[_Devices]
%S_DeviceDesc%=_Install1, USB\VID_0D97&PID_0101
;******************************************************************************
; Install section ( Device1 )
;------------------------------------------------------------------------------
; driver-specific, Win98
[_Install1]
CopyFiles=_CopyFiles_sys
AddReg=_AddReg_SW1, _AddReg_98, _Parameters1_98
; device-specific, Win98
[_Install1.HW]
AddReg=_AddReg_HW1
; driver-specific, Win2000
[_Install1.NTx86]
CopyFiles=_CopyFiles_sys
AddReg=_AddReg_SW1, _Parameters1_NT
; service-install, Win2000
[_Install1.NTx86.Services]
AddService = %S_DriverName%, 0x00000002, _NT_AddService, _NT_EventLog
; device-specific, Win2000
[_Install1.NTx86.HW]
AddReg=_AddReg_HW1
;******************************************************************************
; NT Service sections (Win2000/XP only)
;------------------------------------------------------------------------------
[_NT_AddService]
DisplayName = %S_ServiceDisplayName%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %10%\System32\Drivers\%S_DriverName%.sys
[_NT_EventLog]
AddReg=_NT_EventLog_AddReg
[_NT_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\%S_DriverName%.sys"
HKR,,TypesSupported, 0x00010001,7
;******************************************************************************
; Registry sections ( Device1 )
;------------------------------------------------------------------------------
[_AddReg_98]
; required standard entries
HKR,,NTMPDriver,,%S_DriverName%.sys
HKR,,DevLoader,,*ntkern
[_AddReg_SW1]
; create registry key used to store configuration parameters
HKLM,"%S_ConfigPath%",,,
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",,,
[_AddReg_HW1]
; Create a link to the configuration key. This is absolute required!
HKR,,USBIO_ConfigurationPath,,\Registry\Machine\%S_ConfigPath%\%S_DeviceConfigPath1%
;
; ### modify here ###
; Enable the next line to create an additional private user interface for your device.
; This is strongly recommended if you ship the driver together with a product.
; DO NOT USE an existing GUID. Generate a new one instead !
; Use guidgen.exe to generate a new GUID, copy-paste it into the following line.
;HKR,,USBIO_UserInterfaceGuid,,"{????????-????-????-????-????????????}"
; parameters used on Windows 98, Windows ME
[_Parameters1_98]
; Set the default behaviour of the driver for Windows 98 and Windows ME.
; For a description of the parameters, refer to the USBIO Reference Manual.
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",PowerStateOnOpen,0x00010001, 0
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",PowerStateOnClose,0x00010001, 0
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MinPowerStateUsed,0x00010001, 3
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MinPowerStateUnused,0x00010001, 3
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",EnableRemoteWakeup,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",AbortPipesOnPowerDown,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",UnconfigureOnClose,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",ResetDeviceOnClose,0x00010001, 0
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MaxIsoPackets,0x00010001, 64
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",ShortTransferOk,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",RequestTimeout,0x00010001, 1000
; parameters used on Windows 2000 and Windows XP
[_Parameters1_NT]
; Set the default behaviour of the driver for Windows 2000 and Windows XP
; For a description of the parameters, refer to the USBIO Reference Manual.
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",PowerStateOnOpen,0x00010001, 0
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",PowerStateOnClose,0x00010001, 0
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MinPowerStateUsed,0x00010001, 3
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MinPowerStateUnused,0x00010001, 3
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",EnableRemoteWakeup,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",AbortPipesOnPowerDown,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",UnconfigureOnClose,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",ResetDeviceOnClose,0x00010001, 0
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",MaxIsoPackets,0x00010001, 64
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",ShortTransferOk,0x00010001, 1
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",RequestTimeout,0x00010001, 1000
HKLM,"%S_ConfigPath%"\"%S_DeviceConfigPath1%",SuppressPnPRemoveDlg,0x00010001, 1
;******************************************************************************
; Registry sections ( Device2 )
; may be repeated to support more than one device
;------------------------------------------------------------------------------
; ...
;******************************************************************************
; Copy Files section
;------------------------------------------------------------------------------
[_CopyFiles_sys]
; Specify the correct file name of the driver binary.
sbigusbi.sys
;******************************************************************************
; Options
;------------------------------------------------------------------------------
[ControlFlags]
; Advanced options can be specified here.
; For details, refer to the Windows 2000 DDK.
;******************************************************************************
; Destination Directories
;------------------------------------------------------------------------------
[DestinationDirs]
DefaultDestDir = 11 ; SYSTEM directory
_CopyFiles_sys = 10,System32\Drivers
;******************************************************************************
; Disk Layout
;------------------------------------------------------------------------------
[SourceDisksNames]
1=%S_DiskName%,,
[SourceDisksFiles]
; Specify the correct file name of the driver binary.
sbigusbi.sys
;******************************************************************************
; Text Strings
;------------------------------------------------------------------------------
[Strings]
; provider name
S_Provider="SBIG"
; manufacturer name
S_Mfg="SBIG"
; device class display name, shown in Device Manager
S_DeviceClassDisplayName="USB"
; device description
; *** The following line has been generated by USBIO Installation Wizard. ***
S_DeviceDesc="SBIG USBI Camera"
; disk name
S_DiskName="SBIG USBI Driver Disk"
; file name of driver executable
S_DriverName="sbigusbi"
; service display name
S_ServiceDisplayName="SBIG USBI Driver (sbigusbi.sys)"
;
; configuration registry path (where the registry parameters will be located)
; IMPORTANT: MUST BE under SYSTEM\CurrentControlSet\Services !
; The string should be in the format
; SYSTEM\CurrentControlSet\Services\<DriverName>
;
S_ConfigPath="SYSTEM\CurrentControlSet\Services\sbigusbi"
; device-specific configuration registry path
S_DeviceConfigPath1="Parameters"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.