1. 952015pc.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (952015pc.exe)

README.TXT
*****************************************************************************
*  Installing microLaser(TM) Pro Series Printer Software on WINDOWS(R) 95   *
*****************************************************************************

To install your TI printer driver, follow these steps.

USING THE PLUG & PLAY METHOD
****************************

1.  Make sure that your printer is plugged in and connected to your PC.
2.  Turn Your PC OFF, then ON.
    When the screen "New Hardware Found" appears,  one of the following
    printer names is displayed:

    -TI microLaser PowerPro/12
    -TI microLaser Pro/8

    If your screen displays only partial printer name click on CANCEL and use
    the Add Printer Method to install your printer driver.

3.  Click Ok.
4.  Change to location where you place your driver files 
5.  Click OK.

     The printer name appears highlighted in the box.

6.  Click next.
7.  Select yes to print a test page.
8.  Click FINISH.
9.  Insert your Windows 95 installation media (CD or diskette) and click OK.
10. Type the drive letter of the installation media.  If the installation
    media is a CD, change the directory to \WIN95.
11. Click OK.
12. Click yes when the test page prints.



  
NOTE:  The additional PostScript and PCL5 files needed to run
       with the TI microLaser Pro drivers, have been been provided
       on the Windows 95 disk.  The additional PostScript files
       are in \WBACKUP\PS and the additional PCL5 files are in
       \WBACKUP\PCL5.  These additional files have been provided
       as a backup and are not intended to be used upon installation
       unless you do not have access to your Windows 95 media.
       CAUTION:  THE FILES PROVIDED IN \WBACKUP COULD BE AN OLDER
       VERSION THAN THE FILES PROVIDED WITH YOUR WINDOWS 95 DISK OR CD.




USING THE ADD PRINTER METHOD
****************************

If the Plug & Play method  fails to recognize your printer, follow these
steps to install your printer driver.

1.  Click on START , SETTINGS, then PRINTERS.
2.  Double-click on the ADD PRINTERS icon.
3.  Click NEXT.
4.  Select how your printer is attached to your computer (Local or Network).
5.  Click NEXT.
6.  Click HAVE DISK.
7.  Change to location where you place your driver files :\W95\2015PC
8.  Click OK.
9.  Choose your printer driver from the list.
10. Click NEXT.
11. Select your printer port.
12. Click NEXT.
13. Select whether you want this driver the default Windows 95 printer driver.
14. Click NEXT.
15. Select Yes to print test a page.
16. Click FINISH.
17. Insert your Windows 95 installation media (CD or diskette) and click OK.
18. Type the drive letter of the installation media.  If the installation
    media is a CD change the directory to \WIN95.
19. Click OK.
20. Click Yes when test page prints.