----------------------------------------------------------------
Instructions for installing for the FireWire/1394 Storage System
----------------------------------------------------------------
Your FireWire/1394 Storage System has been designed to be easy to use and install.
This guide has been provided to help you correctly install the necessary drivers.
***************************************************************************
* 1. Make sure that the IDE/ATAPI device is setting in the Master mode. *
* 2. External power supply is required if bus power is not enough to *
* support the device. *
***************************************************************************
1. PC USERS
Your FireWire/1394 Storage System is compatible with any PC running Windows
98SE/ME and Windows 2000/XP that has a FireWire/1394 port. It installs with
the normal Plug and Play process:
1) Make sure that the FireWire/1394 Storage System is plugged into a wall
outlet and is powered up.
2) Plug the FireWire/1394 cable into the PC.
3) Windows will find the new hardware and will give drive Icon automatically.
No other drivers are required.
The drivers are now loaded. If the storage device in your FireWire/1394
Storage System is a hard disk, you must now partition and format the drive.
This is done through the use of the DOS utility FDISK. See your Windows
documentation if you are unfamiliar with FDISK. Note that you must run FDISK
before you try to format the drive and that you must run FDISK in a DOS
window while Windows is running.
If you have a problem in plug and unplug with Windows 98SE, you must
download the patch file from Microsoft Website to solve this problem.
http://www.microsoft.com/Windows98/downloads/contents/WURecommended
/S_WUFeatured/1394/Default.asp
2. Macintosh Users
Your FireWire/1394 Storage System is compatible with any Mac running at least
Mac OS 8 & above and having a FireWire/1394 port. Here is how you install the
drivers:
1) Place the CD-ROM you received with the FireWire/1394 Storage System
in your CD-ROM drive. There are few drivers in the CD, G:\Deltron\1394\MACOS.
(G:\ is the letter of your CD-ROM driver)
2) Drag and drop following files into "SystemFolder:Extensions".
3) Files required for MacOS 8.x to 9.x are "FWSBP2DiskDriver" driver. "FireWire
Enabler" and "FireWire Support" are also included. If both files are not
pre-installed by MacOS, simply drag both files into "SystemFolder:Extensions"
as well. If both files are already installed, do not install them.
4) Reboot the computer.
5) When the computer is rebooted, power up the FireWire/1394 Storage System and
connect a FireWire/1394 cable between the FireWire/1394 Storage System and the
computer.
6) If everything is installed correctly, you will see a new icon on the desktop
that corresponds to the FireWire/1394 Storage System.
The drives for your FireWire/1394 Storage System are now installed. You now need
to initialize the media in the drive. To format your media:
1) Highlight the icon for the FireWire/1394 Storage System.
2) From the Finder menu located at the top of the screen, select Special, Erase
Disk. You can select either DOS or Macintosh formatting. If you intend to
use the device on both a PC and a Mac, select DOS formatting.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.