DOSLAN.TXT Driver File Contents (Aln-201.zip)

   DOS LAN Service

   Introduction:
   -------------
   This document describes the procedure to install NDIS driver on DOS
   LAN service  for AcerLAN ALN-201 PCI Ethernet adapter.

   Location of Driver:  \DOSNDIS\ALN201.DOS


   Installing driver procedure on DOS LAN Service :
   --------------------------------------------------
      Before you start with the installation  process,  make sure that
      DOS LAN Services is properly installed.  Similarly, your adapter
      should also be properly installed in your client PC.

      1. Copy ALN201.DOS from your Driver diskette (A:\DOSNDIS) to DOS
         LAN Services subdirectory C:\NET .

      2. Under DOS LAN Service subdirectory C:\NET, run INSTALL

      3. The  screen  display  some description. If it's correct, move
         highlight to "The listed options are correct" item ,then press
         ENTER.

      4. Move highlight to "Network Card", then press ENTER.

      5. Select "Change driver for network card." item, then press ENTER.

      6. Select "Network card not shown in list below..", then press ENTER.

      7. Insert the AcerLAN ALN-201 driver diskette in floppy A,and specify
         the pathname A:\DOSNDIS,then press ENTER.

      8. AcerLAN ALN-201 driver is now installed on your computer, reboot
         your computer.

      NOTES:
      ------
          Parameters for the PROTOCOL.INI file:

            AdapterID : This keyword is provided by ALN201, and is required
                        when  more than one ALN-201 adapters exist on one
                        system.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.45