Microdyne Support Publishing January 1996
Microdyne NE4200 PCMCIA Ethernet Card Installation
for Windows for Workgroup 3.11
Contents
--------
*Introduction
*Requirements
*Minimum Skill Level
*Getting Started
Introduction
------------
This installation assumes that the PCMCIA drivers are working properly.
Getting Started will describe the installation instructions.
Requirements
------------
*A PCMCIA compatible Laptop
*A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and
VLSI) or Databook compatible.
*Window for Workgroup 3.11
*A NE4200
*A knowledge of basic DOS commands and editing text files
Minimum Skill Level
-------------------
*A knowledge of basic DOS commands
*A knowledge of editing text files
*A knowledge of DOS basic file structure
*A knowledge of the network driver configuration being used
*Please see Support Options if you are not comfortable will this
skill level
Getting Started
---------------
Note: The NE4200 WFW 3.11 driver comply to NDIS 3.0 specs.
*Under DOS, install PCMCIA software which you want.
*When a LAN driver is installed, Windows for Workgroups will present a
list of all available drivers. Since there will be no NE4200
drivers (ICARD.386, ICARD.DOS and ICARD.COM driver programs)
initially, select UNLIST for third-party adapters not included in the
list.
*Windows for Workgroups will ask for the path where the adapter drivers
reside.
Modify the path accordingly.(ie. If the AUTOinstall was used C:\WFW311)
*Windows for Workgroups will check whether or not the OEMSETUP.INF file
exists in the specified path. If the file exists, Windows for
Workgroups will then copy the appropriate drivers into the Windows
for Workgroups system.
The driver is now properly copied. Installation will then proceed to
the next steps. For information on these steps, please refer to your
Windows for Workgroups manual.
After installation, the drivers will be part of the Windows for
Workgroups system. Subsequent accesses to the driver lists will
include the NE4200 drivers.
NOTE TO USERS PRINTING THIS FILE FROM WINDOWS:
IN ORDER FOR THIS FILE TO PRINT CORRECTLY
LEFT AND RIGHT MARGINS MUST BE SET TO 1/4 INCH
AND TOP AND BOTTOM MARGINS SET TO 1/2 INCH IN YOUR PAGE SETUP.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.