1. 11usbspu.zip Driver
2. Ftser2k.inf File Contents

Ftser2k.inf Driver File Contents (11usbspu.zip)

; Installation inf for the FTDI USB Serial Port
;
; (c) Copyright 2000 FTDI Ltd.
;

[Version]
Signature="$Windows NT$"
Class=Ports
ClassGUID={4d36e978-e325-11ce-bfc1-08002be10318}
Provider=%Ftdi%
;CatalogFile=ftser2k.cat
DriverVer=03/10/2000,1.00.2046

[SourceDisksNames]
1=%FTDI.Drivers.Disk%

[SourceDisksFiles]
ftser2k.sys=1
ftser2k.inf=1

[ControlFlags]
ExcludeFromSelect=*

[Manufacturer]
%Ftdi%=FtdiHw

[FtdiHw]
%USB\VID_0403&PID_8372.DeviceDesc%=FTSER2K,FTDIBUS\COMPORT&VID_0403&PID_8372

[DestinationDirs]
DefaultDestDir=10,System32\Drivers
FTSER2K.CopyFiles=10,System32\Drivers

[FTSER2K]
CopyFiles=FTSER2K.CopyFiles
AddReg=FTSER2K.AddReg

[FTSER2K.HW]
AddReg=FTSER2K.AddReg.HW

[FTSER2K.Services]
AddService = %FTSER2K.SvcName%, 0x00000002, FTSER2K.AddService
AddService = %SERENUM.SvcName%,,SERENUM.AddService
DelService = %FTSER2K.OldSvcName%

[FTSER2K.AddService]
DisplayName    = %FTSER2K.SvcDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %10%\System32\Drivers\FTSER2K.sys
LoadOrderGroup = Base

; -------------- Serenum Driver install section
[SERENUM.AddService]
DisplayName    = %SERENUM.SvcDesc%
ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
StartType      = 3               ; SERVICE_DEMAND_START
ErrorControl   = 1               ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\serenum.sys
LoadOrderGroup = PNP Filter

[FTSER2K.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,ftser2k.sys
HKLM,"System\CurrentControlSet\Services\FTSER2K\Parameters","MaximumTransferSize",0x10001,4096
HKLM,"System\CurrentControlSet\Services\FTSER2K\Parameters","DebugLevel",0x10001,2

[FTSER2K.AddReg.HW]
HKR,,"UpperFilters",0x00010000,"serenum"
HKR,,"ConfigData",1,00,00,3F,3F,C4,09,E2,04,71,02,38,41,9c,00,4e,00,27,00,13,40,0D,00,03,80,00,00,00,00,00,00,00,00,34,00

[FTSER2K.CopyFiles]
ftser2k.sys
;serenum.sys

;---------------------------------------------------------------;

[Strings]
Ftdi="FTDI"
FTDI.Drivers.Disk="FTDI USB Drivers Disk"
USB\VID_0403&PID_8372.DeviceDesc="USB Serial Port"
FTSER2K.SvcDesc="USB serial port driver"
FTSER2K.SvcName="FTSER2K"
FTSER2K.OldSvcName="FTSERIAL"
SERENUM.SvcName = "Serenum"
SERENUM.SvcDesc = "Serenum Filter Driver"